2003 Dodge Ram 1500 Catalytic Converter

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. 2.50". CARB Executive Order D-193-136. Engine Family Number 3CRXT03.75B0. Certification Level: TIER1. OE Spec. Cutting and welding required during installation. Legal for use in the state of California, New York and Maine.

• PRICE: 871.99
• Location:: CARB
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: No
• Body Length: 13in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: None
• Universal Or Specific Fit: Universal
• Body Shape: Round
• Oxygen Sensor Location: Post Converter
• Inlet Gasket Included: No
• Mounting Hardware Included: No
• Overall Length: 13in
• Body Width: 4in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2.5in
• Body Material: Stainless Steel
• Sensor Port Count: 1
• Inlet Inside Diameter: 2.5in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 4in
• Outlet Type: Weld-On
• Outlet Orientation: Straight

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. 2.5". Rear. CARB Executive Order D-193-101. Engine Family Number 3CRXA0287H41, 3CRXA0287J40. Certification Level: LEV1 ULEV. OE Spec. Cutting and welding required during installation. This product is in compliance with California regulations.

• PRICE: 672.99
• Location:: CARB
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 12in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Oval
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Overall Length: 16in
• Body Width: 6.375in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2.5in
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2.5in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 3.75in
• Outlet Type: Weld-On
• Outlet Orientation: Straight
• Grade Type: Premium Replacement

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. 3". CARB Executive Order D-193-100. Engine Family Number 3CRXT05.95B1, 3CRXT05.96B1. Certification Level: TIER1. OE Spec. Cutting and welding required during installation. Legal for use in the state of California, New York and Maine.

• PRICE: 858.99
• Location:: CARB
• Item Grade: Premium Replacement
• Substrate Material: Ceramic
• Format: Universal
• Exhaust Pipe Outlet Connection Type: Flange
• Outlet Diameter (in): 2.25
• Oxygen Sensor Location: Pre Catalyst
• Mount Type: Uses Factory Hangers
• Housing Material: Stainless Steel
• CARB Compliant: Yes
• Exhaust Pipe Inlet Connection Type: Welded Flange
• Air Tube Adaptable: Not Air Tube Kit Adaptable

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. 2". Front left, front right. CARB Executive Order D-193-101. Engine Family Number 3CRXA0287H41, 3CRXA0287J40. Certification Level: LEV1 ULEV. OE Spec. Cutting and welding required during installation. This product is in compliance with California regulations.

• PRICE: 561.99
• Location:: CARB
• Body Width: 4.375
• Universal Or Specific Fit: Universal
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.0
• Body Material: Stainless Steel
• Inlet Inside Diameter: 2.0
• Body Length: 13.0
• Overall Length: 13.0
• Grade Type: Premium Replacement

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. 2.50". Left, Right. CARB Executive Order D-193-100. Engine Family Number 3CRXT05.96B1. Certification Level: TIER1. OE Spec. Cutting and welding required during installation. Legal for use in the state of California, New York and Maine.

• PRICE: 858.99
• Location:: CARB
• Item Grade: Premium Replacement
• Substrate Material: Ceramic
• Format: Universal
• Exhaust Pipe Outlet Connection Type: Single
• Oxygen Sensor Location: No Port Location
• Outlet Diameter (in): 2.5
• Mount Type: Uses Factory Hangers
• Housing Material: Stainless Steel
• CARB Compliant: Yes
• Exhaust Pipe Inlet Connection Type: Slip On
• Air Tube Adaptable: Not Air Tube Kit Adaptable

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. 2.25". Left, Right. CARB Executive Order D-193-100. Engine Family Number 3CRXT05.96B1. Certification Level: TIER1. OE Spec. Cutting and welding required during installation. Legal for use in the state of California, New York and Maine.

• PRICE: 858.99
• Location:: CARB
• Body Width: 5.0
• Universal Or Specific Fit: Universal
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.0
• Body Material: Stainless Steel
• Inlet Inside Diameter: 2.0
• Body Length: 7.5
• Overall Length: 7.5
• Grade Type: Premium Replacement

Application: OE Direct Fit - Factory mounting style

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. CARB Executive Order D-193-136. Engine Family Number 3CRXT03.75B0. Certification Level: TIER1. Legal for use in the state of California, New York and Maine.

• PRICE: 1866.99
• Location:: CARB
• Outlet Quantity: 1
• Hangers Included: Yes
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: No
• Body Length: 11in
• Outlet Gasket Included: No
• Clamps Included: Yes
• Inlet Quantity: 2
• Finish: Stainless Steel
• Heat Shield Material: None
• Universal Or Specific Fit: Specific
• Body Shape: Round
• Oxygen Sensor Location: Pre and Post Converter
• Inlet Gasket Included: No
• Overall Length: 59.875in
• Mounting Hardware Included: Yes
• Body Width: 5in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2.5in
• Body Material: Stainless Steel
• Inlet Inside Diameter: 2.25in
• Inlet Mounting Hardware Included: No
• Sensor Port Count: 2
• Outlet Mounting Hardware Included: No
• Body Height: 5in
• Outlet Type: Clamp-On
• Grade Type: Regular

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Front left or front right. CARB Executive Order D-280-107. Engine Family #3CRXA0287H41 or #3CRXA0287J40. Certification level: LEV1 ULEV. 2.5" inner/ 2.5" outer diameter; 16.5" overall; LG oval; with O2 fitting. Legal for use in the state of California, New York and Maine.

• PRICE: 395.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Center. CARB Executive Order D-280-101. Engine Family #3CRXT05.95B1 or #3CRXT05.96B1. Certification level: TIER1. 2" inner/ 2.5" outer diameter; 17" overall. Legal for use in the state of California, New York and Maine.

• PRICE: 492.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Optional universal converter - Sizing may be required. Center. CARB Executive Order D-280-107. Engine Family #3CRXA0287H41 or #3CRXA0287J40. Certification level: LEV1 ULEV. 3" inner/ 3" outer diameter; 16" overall. Legal for use in the state of California, New York and Maine.

• PRICE: 401.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Center. CARB Executive Order D-280-107. Engine Family #3CRXA0287H41 or #3CRXA0287J40. Certification level: LEV1 ULEV. 3" inner/ 3" outer diameter; 16.5" overall. Legal for use in the state of California, New York and Maine.

• PRICE: 381.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Optional universal converter - Sizing may be required. Front left or front right. CARB Executive Order D-280-107. Engine Family #3CRXA0287H41 or #3CRXA0287J40. Certification level: LEV1 ULEV. 2.25" inner/ 2.25" outer diameter; 15.5" overall. Legal for use in the state of California, New York and Maine.

• PRICE: 711.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Optional universal converter - Sizing may be required. Front left or front right. CARB Executive Order D-280-107. Engine Family #3CRXA0287H41 or #3CRXA0287J40. Certification level: LEV1 ULEV. 2.25" inner/ 2.25" outer diameter; 15.5" overall; 5" round; with O2 fitting. Legal for use in the state of California, New York and Maine.

• PRICE: 711.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Optional universal converter - Sizing may be required. Front left or front right. CARB Executive Order D-280-107. Engine Family #3CRXA0287H41 or #3CRXA0287J40. Certification level: LEV1 ULEV. 2" inner/ 2" outer diameter; 14" overall; 4" round; with O2 fitting. Legal for use in the state of California, New York and Maine.

• PRICE: 399.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Optional universal converter - Sizing may be required. Center. CARB Executive Order D-280-107. Engine Family #3CRXA0287H41 or #3CRXA0287J40. Certification level: LEV1 ULEV. 3" inner/ 3" outer diameter; 15.5" overall. Legal for use in the state of California, New York and Maine.

• PRICE: 711.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: HM grade converter. Federal emissions. Cutting and welding required during installation. Not for sale or use in the state of California.

• PRICE: 211.99
• Location:: Federal
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 9in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Oval
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Mounting Hardware Included: No
• Overall Length: 13in
• Body Width: 5.5in
• Substrate Material: Ceramic
• Outlet Inside Diameter: 3in
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2.5in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 3.875in
• Outlet Type: Weld-On
• Outlet Orientation: Straight
• Grade Type: Regular

Application: Universal - Requires cut and weld

Notes: HM Grade converter. Front Left. Cutting and welding required during installation. Not for sale or use in the state of California.

• PRICE: 221.99
• Location:: Federal
• Body Width: 4.75
• Universal Or Specific Fit: Universal
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.5
• Body Material: Stainless Steel
• Inlet Inside Diameter: 2.5
• Body Length: 13.0
• Overall Length: 13.0
• Grade Type: Premium Replacement

Application: Universal - Requires cut and weld

Notes: HM Grade converter. Rear. Cutting and welding required during installation. Not for sale or use in the state of California.

• PRICE: 276.99
• Location:: Federal
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 12in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Oval
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Overall Length: 16in
• Body Width: 5.5in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2.5in
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2.5in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 3.75in
• Outlet Type: Weld-On
• Outlet Orientation: Straight

Application: Universal - Requires cut and weld

Notes: HM Grade converter. California emissions. Registered Outside of California. Cutting and welding required during installation. Not for sale or use in the state of California.

• PRICE: 261.99
• Location:: Federal
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 12in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Oval
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Overall Length: 16in
• Body Width: 5.5in
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2in
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 3.75in
• Outlet Type: Weld-On
• Outlet Orientation: Straight
• Grade Type: Regular

Application: OE Direct Fit - Factory mounting style

Notes: HM Grade Converter. Not for sale or use in the state of California.

• PRICE: 571.99
• Location:: Federal

Application: OE Direct Fit - Factory mounting style

Notes: HM Grade Converter. Not for sale or use in the state of California.

• PRICE: 711.99
• Location:: Federal
• Body Width: 58
• Universal Or Specific Fit: Direct OE Replacement
• Substrate Material: Ceramic
• Body Material: Stainless Steel
• Body Length: 58
• Overall Length: 58
• Grade Type: OEM Standard

Application: Universal - Requires cut and weld

Notes: OEM grade converter. California emissions equipped vehicles registered outside of California, Cutting and welding required during installation. Not for sale or use in the state of California

• PRICE: 272.99
• Location:: Federal
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 12in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Oval
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Overall Length: 16in
• Body Width: 5.625in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2in
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 3.75in
• Outlet Type: Weld-On
• Outlet Orientation: Straight
• Grade Type: Premium Replacement

Application: Universal - Requires cut and weld

Notes: OEM grade converter. Rear. Cutting and welding required during installation. Not for sale or use in the state of California.

• PRICE: 279.99
• Location:: Federal
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 12in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Oval
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Overall Length: 16in
• Body Width: 5.625in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2.5in
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2.5in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 3.75in
• Outlet Type: Weld-On
• Outlet Orientation: Straight
• Grade Type: Premium Replacement

Application: OE Direct Fit - Factory mounting style

Notes: HM Grade Converter. California emissions equipped vehicles registered outside of California. Not for sale or use in the state of California

• PRICE: 1038.99
• Location:: Federal
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Pre and Post Converter
• Inlet Gasket Included: No
• Overall Length: 49.5in
• Hangers Included: No
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: No
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Inlet Mounting Hardware Included: No
• Sensor Port Count: 4
• Outlet Mounting Hardware Included: No
• Outlet Gasket Included: No
• Clamps Included: Yes
• Outlet Type: Weld-On
• Finish: Stainless Steel
• Grade Type: Regular
• Heat Shield Material: None