2011 Nissan/Datsun Versa Catalytic Converter

Application: Universal - Requires cut and weld

Notes: Rear, Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. BNSXV01.6G4A. Cutting and welding required during installation. OEM spec. 2.25" universal California OBDII catalytic converter. CARB executive order D-193-133. Certification level : LEV2 ultra low emissions vehicle. Legal for use in the state of California, Colorado, New York and Maine.

• PRICE: 376.99
• Location:: CARB
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 9in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Round
• Inlet Gasket Included: No
• Overall Length: 13in
• Body Width: 4.375in
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.25in
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2.25in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• California Air Resources Board (CARB) Certified: Yes
• Body Height: 4in
• Outlet Type: Weld-On
• Outlet Orientation: Straight

Application: Universal - Requires cut and weld

Notes: Front, Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. BNSXV01.6G4A. Cutting and welding required during installation. OEM spec. 2.50" universal California OBDII catalytic converter. CARB executive order D-193-133. Certification level : LEV2 ultra low emissions vehicle. Legal for use in the state of California, Colorado, New York and Maine.

• PRICE: 569.99
• Location:: CARB
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: No
• Body Length: 7in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: None
• Universal Or Specific Fit: Universal
• Body Shape: Round
• Inlet Gasket Included: No
• Overall Length: 7in
• Mounting Hardware Included: No
• Body Width: 4in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2.5in
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2.5in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 4in
• California Air Resources Board (CARB) Certified: Yes
• Outlet Type: Weld-On
• Outlet Orientation: Straight

Application: OE Direct Fit - Factory mounting style

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. BNSXV01.8G1A. Direct-fit California OBDII converters. CARB executive order D-193-133. Certification level : LEV2 ultra low emissions vehicle. Legal for use in the state of California, Colorado, New York and Maine.

• PRICE: 1286.99
• Location:: CARB
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Post Converter
• Inlet Gasket Included: Yes
• Outlet Quantity: 1
• Overall Length: 33in
• Hangers Included: No
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: No
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Sensor Port Count: 3
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Outlet Gasket Included: Yes
• Clamps Included: No
• California Air Resources Board (CARB) Certified: Yes
• Outlet Type: Bolt-On
• Finish: Stainless Steel
• Grade Type: Regular
• Heat Shield Material: None

Application: OE Direct Fit - Factory mounting style

Notes: OEM grade converter. Not for sale or use in the state of California.

• PRICE: 604.99
• Location:: Federal
• California Air Resources Board (CARB) Certified: No

Application: Universal - Requires cut and weld

Notes: Catalytic Converter. Cutting and welding required during installation. Universal oem grade federal (exc.ca). Not for sale or use in the state of California.

• PRICE: 229.99
• Location:: Federal
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 9in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Round
• Inlet Gasket Included: No
• Overall Length: 13in
• Body Width: 4.25in
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.25in
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2.25in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• California Air Resources Board (CARB) Certified: No
• Body Height: 4.375in
• Outlet Type: Weld-On
• Outlet Orientation: Straight
• Grade Type: Premium

Application: Universal - Requires cut and weld

Notes: EPA enhanced OBDII by design unit. Not for sale or use on vehicles licensed in the states of CA, CO, ME and NY. Restrictions may apply in other states. Check with your state authority for details. Federal and California emissions. Not for sale or use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details.

• PRICE: 363.99
• Location:: Federal

Application: OE Direct Fit - Factory mounting style

Notes: Not for sale or use on vehicles licensed in the states of CA, CO, ME and NY. Restrictions may apply in other states. Check with your state authority for details. Federal and California emissions. Not for sale or use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details.

• PRICE: 613.99
• Location:: Federal