2005 Toyota Camry Catalytic Converter

Buy Online. Pick Up In-Store.

What are you working on today?

Get an exact fit for your 2005 Toyota Camry

1-24 of 59 Results

1-24 of 59 Results
  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Universal Catalytic Converter 2.5in 5571206 for 2005 Toyota Camry
    • Part # 5571206
    • SKU # 244701
    • Location: CARB

    Application: Universal - Requires cut and weld

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Pre-OBDII catalytic converter. 2.50". CARB Executive Order D-193-137. Engine Family Number 5TYXV03.3PEA. Certification Level: LEV2 ULEV. OE Spec. Cutting and welding required during installation. Legal for use in the state of California, New York and Maine.

    • PRICE: 499.99
    • Location:: CARB
    • Outlet Quantity: 1
    • Hangers Included: No
    • Air Tube Count: 0
    • Inlet Type: Weld-On
    • Heat Shield Attached: No
    • Body Length: 9in
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Inlet Orientation: Straight
    • Inlet Quantity: 1
    • Finish: Stainless Steel
    • Heat Shield Material: None
    • Universal Or Specific Fit: Universal
    • Body Shape: Round
    • Oxygen Sensor Location: None
    • Inlet Gasket Included: No
    • Overall Length: 9in
    • Body Width: 4in
    • Substrate Material: Ceramic
    • Tube Material: Stainless Steel
    • Outlet Inside Diameter: 2.5in
    • Body Material: Stainless Steel
    • Sensor Port Count: 0
    • Inlet Inside Diameter: 2.5in
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Height: 4in
    • Outlet Type: Weld-On
    • Outlet Orientation: Straight

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 5571988 for 2005 Toyota Camry
    • Part # 5571988
    • SKU # 1078322
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. CARB Executive Order D-193-137. Engine Family Number 5TYXV02.4PEB. Certification Level: LEV2 ULEV. Except Partial Zero Emissions Vehicles (PZEV). Legal for use in the state of California, New York and Maine.

    • PRICE: 945.99
    • Location:: CARB
    • Universal Or Specific Fit: Specific
    • Oxygen Sensor Location: Pre Converter
    • Inlet Gasket Included: No
    • Overall Length: 46.625in
    • Hangers Included: Yes
    • Inlet Type: Bolt-On
    • Air Tube Count: 0
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 1
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Outlet Type: Bolt-On
    • Finish: Stainless Steel
    • Grade Type: Regular
    • Heat Shield Material: None

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Manifold Catalytic Converter 5531291 for 2005 Toyota Camry
    • Part # 5531291
    • SKU # 501696
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Manifold converter, Verify EFN (Engine Family Number) found on emission label on vehicle. Exhaust manifold with integrated catalytic converter. CARB Executive Order D-193-137. Engine Family Number 5TYXV02.4PEB. Certification Level: LEV2 ULEV. LEV2 Ultra Low Emission Vehicle (Ultra Low Emission Vehicle). Legal for use in the state of California, New York and Maine.

    • PRICE: 1099.99
    • Location:: CARB
    • Inlet Gasket Included: Yes
    • Converter Body Material: Stainless Steel
    • Overall Length: 20.625in
    • Converter Body Length: 7in
    • Inlet Type: Flanged
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Type: One-Piece
    • Sensor Port Count: 1
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Outlet Gasket Included: Yes
    • Clamps Included: No
    • Outlet Type: Flanged
    • Finish: Stainless Steel
    • Grade Type: Regular

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Manifold Catalytic Converter 5531398 for 2005 Toyota Camry
    • Part # 5531398
    • SKU # 1078258
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Manifold converter, Verify EFN (Engine Family Number) found on emission label on vehicle. Exhaust manifold with integrated catalytic converter. Front. CARB Executive Order D-193-137. Engine Family Number 5TYXV03.3PEA. Certification Level: LEV2 ULEV. Legal for use in the state of California, New York and Maine.

    • PRICE: 821.99
    • Location:: CARB
    • Inlet Gasket Included: Yes
    • Converter Body Material: Stainless Steel
    • Overall Length: 15.75in
    • Converter Body Length: 6.25in
    • Inlet Type: Flanged
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Type: One-Piece
    • Sensor Port Count: 1
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: Yes
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Outlet Type: Flanged
    • Finish: Stainless Steel
    • Grade Type: Regular

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 5571754 for 2005 Toyota Camry
    • Part # 5571754
    • SKU # 1078506
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. CARB Executive Order D-193-137. Engine Family Number 5TYXV03.3PEA. Certification Level: LEV2 ULEV. Legal for use in the state of California, New York and Maine.

    • PRICE: 722.99
    • Location:: CARB
    • Universal Or Specific Fit: Specific
    • Oxygen Sensor Location: Pre Converter
    • Inlet Gasket Included: No
    • Overall Length: 48.875in
    • Hangers Included: Yes
    • Inlet Type: Bolt-On
    • Air Tube Count: 0
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 1
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Outlet Type: Bolt-On
    • Finish: Stainless Steel
    • Grade Type: Regular
    • Heat Shield Material: None

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Manifold Catalytic Converter 5531610 for 2005 Toyota Camry
    • Part # 5531610
    • SKU # 1078374
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Manifold converter, Verify EFN (Engine Family Number) found on emission label on vehicle. Exhaust manifold with integrated catalytic converter. Rear. CARB Executive Order D-193-137. Engine Family Number 5TYXV03.3PEA. Certification Level: LEV2 ULEV. Legal for use in the state of California, New York and Maine.

    • PRICE: 1101.99
    • Location:: CARB
    • Inlet Gasket Included: Yes
    • Converter Body Material: Stainless Steel
    • Overall Length: 15.375in
    • Converter Body Length: 6.25in
    • Inlet Type: Flanged
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Type: One-Piece
    • Sensor Port Count: 1
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: Yes
    • Outlet Gasket Included: Yes
    • Clamps Included: No
    • Outlet Type: Flanged
    • Finish: Stainless Steel
    • Grade Type: Regular

  • Sponsored
    Sponsored
    Dorman Exhaust Manifold 673-314 for 2005 Toyota Camry
    • Part # 673-314
    • SKU # 1184418
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Catalytic Converter with Integrated Exhaust Manifold. Partial Zero Emission Vehicle (PZEV). Legal for use in the state of California, New York and Maine

    • PRICE: 1704.99
    • Location:: CARB
    • Tube Wall Thickness: 0.125in
    • Outlet Mounting Hole Quantity: 2
    • Converter Body Material: Stainless Steel
    • Outlet Quantity: 1
    • Converter Body Length: 5in
    • Air Tube Count: 1
    • Inlet Type: Flanged
    • CARB Executive Order Number: D-798-9
    • Inlet Mounting Hole Quantity: 5
    • Outlet Gasket Included: Yes
    • New York Certified: Yes
    • Inlet Quantity: 4
    • Finish: None
    • Inlet Port Shape: Round
    • Inlet Gasket Included: Yes
    • Color: Natural
    • Overall Length: 20in
    • Substrate Material: Ceramic
    • Type: One-Piece
    • Sensor Port Count: 1
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: Yes
    • California Air Resources Board (CARB) Certified: Yes
    • Outlet Type: Flanged
    • Outlet Port Shape: Round
    • Grade Type: Regular

  • Sponsored
    Sponsored
    Dorman Exhaust Manifold 673-882 for 2005 Toyota Camry
    • Part # 673-882
    • SKU # 852328
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Front, Exhaust manifold with integrated catalytic converter. Sell Until Depleted. Legal for use in the state of California, New York and Maine

    • PRICE: 591.99
    • Location:: CARB
    • Inlet Mounting Hardware Included: Yes
    • Inlet Gasket Included: Yes
    • Outlet Mounting Hardware Included: Yes
    • Color: Natural
    • Finish: Natural
    • Grade Type: Standard Replacement

  • Sponsored
    Sponsored
    Dorman Exhaust Manifold 673-873 for 2005 Toyota Camry
    • Part # 673-873
    • SKU # 822152
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Rear, Exhaust manifold with integrated catalytic converter. Legal for use in the state of California, New York and Maine.

    • PRICE: 653.99
    • Location:: CARB
    • Inlet Mounting Hardware Included: Yes
    • Inlet Gasket Included: Yes
    • Outlet Mounting Hardware Included: Yes
    • Color: Natural
    • Finish: Natural
    • Grade Type: Standard Replacement

  • Sponsored
    Sponsored
    Dorman Exhaust Manifold 673-8111 for 2005 Toyota Camry
    • Part # 673-8111
    • SKU # 703890
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Exhaust manifold with integrated catalytic converter. Without PZEV emissions. Legal for use in the state of California, New York and Maine

    • PRICE: 979.99
    • Location:: CARB
    • Inlet Mounting Hardware Included: Yes
    • Inlet Gasket Included: Yes
    • Outlet Mounting Hardware Included: Yes
    • Color: Natural
    • Finish: Natural
    • Grade Type: Standard Replacement

  • Sponsored
    Sponsored
    Dorman Exhaust Manifold 672-882 for 2005 Toyota Camry
    • Part # 672-882
    • SKU # 1184556
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Front, Exhaust manifold with integrated catalytic converter. Legal for use in the state of California, New York and Maine.

    • PRICE: 1487.99
    • Location:: CARB
    • Tube Wall Thickness: 0.125in
    • Outlet Mounting Hole Quantity: 2
    • Converter Body Material: Stainless Steel
    • Outlet Quantity: 1
    • Converter Body Length: 5in
    • Inlet Type: Flanged
    • Air Tube Count: 0
    • CARB Executive Order Number: D-798-9
    • Inlet Mounting Hole Quantity: 6
    • Outlet Gasket Included: Yes
    • New York Certified: Yes
    • Inlet Quantity: 3
    • Finish: Natural
    • Inlet Port Shape: Round
    • Inlet Gasket Included: Yes
    • Color: Natural
    • Overall Length: 12in
    • Substrate Material: Ceramic
    • Type: One-Piece
    • Sensor Port Count: 1
    • Inlet Mounting Hardware Included: Yes
    • Outlet Mounting Hardware Included: Yes
    • California Air Resources Board (CARB) Certified: Yes
    • Outlet Type: Flanged
    • Outlet Port Shape: Round
    • Grade Type: Regular

  • Sponsored
    Sponsored
    AP Universal CARB Catalytic Converter 755005 for 2005 Toyota Camry
    • Part # 755005
    • SKU # 368855
    • Location: CARB

    Application: Universal - Requires cut and weld

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Center. CARB Executive Order D-280-102. Engine Family #5TYXV02.4PEB. Certification level: LEV2 ULEV. 2.25" inner/ 2.25" outer diameter; 12" overall. Legal for use in the state of California, New York and Maine.

    • PRICE: 483.99
    • Location:: CARB

  • Sponsored
    Sponsored
    MagnaFlow HM Grade Federal EPA Compliant Universal Catalytic Converter 2.25in 99105HM for 2005 Toyota Camry
    • Part # 99105HM
    • SKU # 275081
    • Location: Federal

    Application: Universal - Requires cut and weld

    Notes: HM Grade converter. Cutting and welding required during installation. Not for sale or use in the state of California.

    • PRICE: 288.99
    • Location:: Federal
    • Outlet Quantity: 1
    • Hangers Included: No
    • Air Tube Count: 0
    • Inlet Type: Weld-On
    • Heat Shield Attached: Yes
    • Body Length: 9in
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Inlet Orientation: Straight
    • Inlet Quantity: 1
    • Finish: Stainless Steel
    • Heat Shield Material: Aluminized Steel
    • Universal Or Specific Fit: Universal
    • Body Shape: Oval
    • Oxygen Sensor Location: None
    • Inlet Gasket Included: No
    • Mounting Hardware Included: No
    • Overall Length: 13in
    • Body Width: 5.5in
    • Substrate Material: Ceramic
    • Outlet Inside Diameter: 2.25in
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 0
    • Inlet Inside Diameter: 2.25in
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Height: 3.875in
    • Outlet Type: Weld-On
    • Outlet Orientation: Straight
    • Grade Type: Regular

  • Sponsored
    Sponsored
    Universal Federal Catalytic Converter 99205HM for 2005 Toyota Camry
    • Part # 99205HM
    • SKU # 275070
    • Location: Federal

    Application: Universal - Requires cut and weld

    Notes: HM Grade converter. Cutting and welding required during installation. Not for sale or use in the state of California.

    • PRICE: 221.99
    • Location:: Federal
    • Outlet Quantity: 1
    • Hangers Included: No
    • Air Tube Count: 0
    • Inlet Type: Weld-On
    • Heat Shield Attached: Yes
    • Body Length: 9in
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Inlet Orientation: Straight
    • Inlet Quantity: 1
    • Finish: Stainless Steel
    • Heat Shield Material: Aluminized Steel
    • Universal Or Specific Fit: Universal
    • Body Shape: Round
    • Oxygen Sensor Location: None
    • Inlet Gasket Included: No
    • Mounting Hardware Included: No
    • Overall Length: 13in
    • Body Width: 4.375in
    • Substrate Material: Ceramic
    • Outlet Inside Diameter: 2.25in
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 0
    • Inlet Inside Diameter: 2.25in
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Height: 4.375in
    • Outlet Type: Weld-On
    • Outlet Orientation: Straight
    • Grade Type: Regular

  • Sponsored
    Sponsored
    MagnaFlow HM Grade Federal EPA Compliant Direct Fit Catalytic Converter 23009 for 2005 Toyota Camry
    • Part # 23009
    • SKU # 937973
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: HM Grade Converter. Not for sale or use in the state of California.

    • PRICE: 543.99
    • Location:: Federal

  • Sponsored
    Sponsored
    MagnaFlow HM Grade Federal EPA Compliant Direct Fit Catalytic Converter 26214-BX for 2005 Toyota Camry
    • Part # 26214-BX
    • SKU # 937794
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: HM Grade Converter. Not for sale or use in the state of California.

    • PRICE: 711.99
    • Location:: Federal

  • Sponsored
    Sponsored
    MagnaFlow HM Grade Federal EPA Compliant Direct Fit Catalytic Converter 27303 for 2005 Toyota Camry
    • Part # 27303
    • SKU # 160942
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: HM Grade Converter. Super ultra low emissions vehicles (LEV2 SULEV). Not for sale or use in the state of California

    • PRICE: 804.99
    • Location:: Federal

  • Sponsored
    Sponsored
    MagnaFlow HM Grade Federal EPA Compliant Direct Fit Catalytic Converter 93166 for 2005 Toyota Camry
    • Part # 93166
    • SKU # 937842
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: HM Grade converter. Excluding Super Ultra Low Emissions Vehicles (LEV 2 SULEV). Not for sale or use in the state of California.

    • PRICE: 484.99
    • Location:: Federal

  • Sponsored
    Sponsored
    MagnaFlow OEM Grade Federal EPA Compliant Manifold Catalytic Converter 49291 for 2005 Toyota Camry
    • Part # 49291
    • SKU # 253631
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: Manifold converter, OEM grade converter. Exhaust manifold with integrated catalytic converter. LEV2 ULEV (Ultra Low Emissions Vehicle). Not for sale or use in the state of California

    • PRICE: 791.99
    • Location:: Federal
    • Inlet Gasket Included: Yes
    • Converter Body Material: Stainless Steel
    • Overall Length: 20.625in
    • Converter Body Length: 6.25in
    • Inlet Type: Flanged
    • CARB Executive Order Number: No
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Type: One-Piece
    • Sensor Port Count: 1
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Outlet Gasket Included: Yes
    • Clamps Included: No
    • Outlet Type: Flanged
    • Finish: Stainless Steel
    • Grade Type: Regular

  • Sponsored
    Sponsored
    MagnaFlow HM Grade Federal EPA Compliant Manifold Catalytic Converter 16465MGF for 2005 Toyota Camry
    • Part # 16465MGF
    • SKU # 108325
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: Manifold converter, HM grade converter. Exhaust manifold with integrated catalytic converter. Rear. Not for sale or use in the state of California.

    • PRICE: 915.99
    • Location:: Federal
    • Inlet Gasket Included: Yes
    • Converter Body Material: Stainless Steel
    • Overall Length: 15.75in
    • Converter Body Length: 6.25in
    • Inlet Type: Flanged
    • CARB Executive Order Number: No
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Type: One-Piece
    • Sensor Port Count: 1
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: Yes
    • Outlet Gasket Included: Yes
    • Clamps Included: No
    • Outlet Type: Flanged
    • Finish: Stainless Steel
    • Grade Type: Regular

  • Sponsored
    Sponsored
    MagnaFlow OEM Grade Federal EPA Compliant Universal Catalytic Converter 2.5in 51206 for 2005 Toyota Camry
    • Part # 51206
    • SKU # 544775
    • Location: Federal

    Application: Universal - Requires cut and weld

    Notes: OEM grade converter. Rear. Cutting and welding required during installation. Not for sale or use in the state of California.

    • PRICE: 241.99
    • Location:: Federal
    • Outlet Quantity: 1
    • Hangers Included: No
    • Air Tube Count: 0
    • Inlet Type: Weld-On
    • Heat Shield Attached: Yes
    • Body Length: 9in
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Inlet Orientation: Straight
    • Inlet Quantity: 1
    • Finish: Stainless Steel
    • Heat Shield Material: Aluminized Steel
    • Universal Or Specific Fit: Universal
    • Body Shape: Round
    • Oxygen Sensor Location: None
    • Inlet Gasket Included: No
    • Overall Length: 13in
    • Body Width: 4.25in
    • Substrate Material: Ceramic
    • Tube Material: Stainless Steel
    • Outlet Inside Diameter: 2.5in
    • Body Material: Stainless Steel
    • Sensor Port Count: 0
    • Inlet Inside Diameter: 2.5in
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Height: 4.375in
    • Outlet Type: Weld-On
    • Outlet Orientation: Straight
    • Grade Type: Premium Replacement

  • Sponsored
    Sponsored
    MagnaFlow HM Grade Federal EPA Compliant Manifold Catalytic Converter 50803 for 2005 Toyota Camry
    • Part # 50803
    • SKU # 834713
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: Manifold converter, HM grade converter. Exhaust manifold with integrated catalytic converter. LEV2 ULEV (Ultra Low Emissions Vehicle). Not for sale or use in the state of California

    • PRICE: 659.99
    • Location:: Federal
    • CARB Executive Order Number: No
    • Substrate Material: Ceramic
    • Converter Body Material: Stainless Steel
    • Overall Length: 15.25
    • Outlet Type: Bolt On
    • Inlet Type: Bolt On
    • Grade Type: OEM Standard

  • Sponsored
    Sponsored
    MagnaFlow OEM Grade Federal EPA Compliant Direct Fit Catalytic Converter 49992 for 2005 Toyota Camry
    • Part # 49992
    • SKU # 880672
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: OEM grade converter. Not for sale or use in the state of California.

    • PRICE: 841.99
    • Location:: Federal
    • Universal Or Specific Fit: Specific
    • Oxygen Sensor Location: Pre Converter
    • Inlet Gasket Included: Yes
    • Overall Length: 48.25in
    • Hangers Included: Yes
    • Inlet Type: Bolt-On
    • Air Tube Count: 0
    • Body Width: 10.0
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Outlet Inside Diameter: 2.25
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Inlet Inside Diameter: 2.0
    • Inlet Mounting Hardware Included: No
    • Sensor Port Count: 2
    • Outlet Mounting Hardware Included: No
    • Body Length: 48.25
    • Outlet Gasket Included: Yes
    • Clamps Included: No
    • Outlet Type: Bolt-On
    • Finish: Stainless Steel
    • Grade Type: Regular
    • Heat Shield Material: None

  • Sponsored
    Sponsored
    MagnaFlow OEM Grade Federal EPA Compliant Universal Catalytic Converter 2.25in 51105 for 2005 Toyota Camry
    • Part # 51105
    • SKU # 429384
    • Location: Federal

    Application: Universal - Requires cut and weld

    Notes: OEM grade converter. Cutting and welding required during installation. Not for sale or use in the state of California.

    • PRICE: 203.99
    • Location:: Federal
    • Outlet Quantity: 1
    • Hangers Included: No
    • Air Tube Count: 0
    • Inlet Type: Weld-On
    • Heat Shield Attached: Yes
    • Body Length: 9in
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Inlet Orientation: Straight
    • Inlet Quantity: 1
    • Finish: Stainless Steel
    • Heat Shield Material: Aluminized Steel
    • Universal Or Specific Fit: Universal
    • Body Shape: Oval
    • Oxygen Sensor Location: None
    • Inlet Gasket Included: No
    • Overall Length: 13in
    • Body Width: 5.5in
    • Substrate Material: Ceramic
    • Outlet Inside Diameter: 2.25in
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 0
    • Inlet Inside Diameter: 2.25in
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Height: 3.75in
    • Outlet Type: Weld-On
    • Outlet Orientation: Straight
    • Grade Type: Premium Replacement