2009 Toyota Camry Catalytic Converter

The catalytic converter for 2009 Toyota Camry is required by federal emissions and treats exhaust gases to neutralize pollutants. It contains catalyst materials like rhodium and platinum that react with harmful compounds burning them off so the exhaust is cleaner. If it fails, your Camry might not run properly and you won't pass a smog check. Replace your bad catalytic converter with a new one from top brands like MagnaFlow and Dorman at AutoZone.

There isn't a replacement interval, nor are there maintenance items for the catalytic converter. When symptoms show up, it's time to replace it. 2009 Camry catalytic converter symptoms can be a Check Engine Light with converter efficiency-related codes, stalling or stumbling as you drive or idle, rattling from the exhaust, and a rotten egg smell from the tailpipe.

Find your new 2009 Toyota Camry catalytic converter and all the other parts you might need at AutoZone. Choose the most convenient way to get your parts with options like Same-Day In-Store Pickup and Free Next-Day Delivery on eligible orders.

What are you working on today?

Get an exact fit for your 2009 Toyota Camry

1-24 of 25 Results

1-24 of 25 Results
      • Sponsored
        Sponsored
        MagnaFlow California CARB Compliant Manifold Catalytic Converter 5531291 for 2009 Toyota Camry
        • Part # 5531291
        • SKU # 501696
        • Location: CARB

        Application: OE Direct Fit - Factory mounting style

        Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter with Integrated Exhaust Manifold. Engine Family #(EFN) 9TYXV02.4BEA. LEV2 ULEV (Ultra Low Emissions Vehicle). Exhaust manifold with integrated catalytic converter California converters. Certification level : LEV2 ultra low emissions vehicle. CARB executive order D-193-137. Legal for use in the state of California, New York and Maine.

        • PRICE: 1154.99
        • Location:: CARB
        • Inlet Gasket Included: Yes
        • Converter Body Material: Stainless Steel
        • Overall Length: 20.625in
        • Converter Body Length: 7in
        • Inlet Type: Flanged
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Type: One-Piece
        • Sensor Port Count: 1
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Outlet Gasket Included: Yes
        • Clamps Included: No
        • Outlet Type: Flanged
        • Finish: Stainless Steel
        • Grade Type: Regular

      • Sponsored
        Sponsored
        MagnaFlow HM Grade Federal EPA Compliant Universal Catalytic Converter 2.5in 99206HM for 2009 Toyota Camry
        • Part # 99206HM
        • SKU # 275066
        • Location: Federal

        Application: Universal - Requires cut and weld

        Notes: HM Grade converter. Cutting and welding required during installation. Not for sale or use in the state of California.

        • PRICE: 233.99
        • Location:: Federal
        • Body Width: 4.75
        • Universal Or Specific Fit: Universal
        • Substrate Material: Ceramic
        • Outlet Inside Diameter: 2.5
        • Body Material: Stainless Steel
        • Inlet Inside Diameter: 2.5
        • Body Length: 13.0
        • Overall Length: 13.0
        • Grade Type: Premium Replacement

      • Sponsored
        Sponsored
        MagnaFlow OEM Grade Federal EPA Compliant Direct Fit Catalytic Converter 49712 for 2009 Toyota Camry
        • Part # 49712
        • SKU # 937954
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: OEM grade converter. Not for sale or use in the state of California.

        • PRICE: 691.99
        • Location:: Federal

      • Sponsored
        Sponsored
        MagnaFlow HM Grade Federal EPA Compliant Direct Fit Catalytic Converter 23002 for 2009 Toyota Camry
        • Part # 23002
        • SKU # 937843
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: HM grade converter. Not for sale or use in the state of California

        • PRICE: 512.99
        • Location:: Federal

      • Sponsored
        Sponsored
        MagnaFlow OEM Grade Federal EPA Compliant Manifold Catalytic Converter 49693 for 2009 Toyota Camry
        • Part # 49693
        • SKU # 435699
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Rear, Catalytic Converter with Integrated Exhaust Manifold. Exhaust manifold with integrated catalytic converter OEM grade federal (except California). Not for sale or use in the state of California.

        • PRICE: 1232.99
        • Location:: Federal
        • Inlet Gasket Included: Yes
        • Converter Body Material: Stainless Steel
        • Overall Length: 12.5in
        • Converter Body Length: 7.875in
        • Inlet Type: Flanged
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Type: One-Piece
        • Sensor Port Count: 1
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: Yes
        • Outlet Gasket Included: Yes
        • Clamps Included: No
        • Outlet Type: Flanged
        • Finish: Stainless Steel
        • Grade Type: Regular

      • Sponsored
        Sponsored
        MagnaFlow HM Grade Federal EPA Compliant Manifold Catalytic Converter 50904 for 2009 Toyota Camry
        • Part # 50904
        • SKU # 77493
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Rear, Catalytic Converter with Integrated Exhaust Manifold. Exhaust manifold with integrated catalytic converter standard grade federal (except California). Not for sale or use in the state of California.

        • PRICE: 986.99
        • Location:: Federal
        • Inlet Gasket Included: Yes
        • Converter Body Material: Stainless Steel
        • Overall Length: 12.5in
        • Converter Body Length: 8in
        • Inlet Type: Flanged
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Type: One-Piece
        • Sensor Port Count: 1
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: Yes
        • Outlet Gasket Included: Yes
        • Clamps Included: No
        • Outlet Type: Flanged
        • Finish: Stainless Steel
        • Grade Type: Regular

      • Sponsored
        Sponsored
        MagnaFlow OEM Grade Federal EPA Compliant Manifold Catalytic Converter 16534MGF for 2009 Toyota Camry
        • Part # 16534MGF
        • SKU # 78152
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Catalytic Converter with Integrated Exhaust Manifold. Exhaust manifold with integrated catalytic converter OEM grade federal (except California). Partial Zero Emissions Vehicle. Not for sale or use in the state of California.

        • PRICE: 1251.99
        • Location:: Federal
        • Inlet Gasket Included: Yes
        • Converter Body Material: Stainless Steel
        • Overall Length: 18.75in
        • Converter Body Length: 6.875in
        • Inlet Type: Flanged
        • CARB Executive Order Number: No
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Type: One-Piece
        • Inlet Mounting Hardware Included: No
        • Sensor Port Count: 2
        • Outlet Mounting Hardware Included: No
        • Outlet Gasket Included: Yes
        • Clamps Included: No
        • Outlet Type: Flanged
        • Finish: Stainless Steel
        • Grade Type: Regular

      • Sponsored
        Sponsored
        MagnaFlow HM Grade Federal EPA Compliant Manifold Catalytic Converter 50803 for 2009 Toyota Camry
        • Part # 50803
        • SKU # 834713
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Catalytic Converter with Integrated Exhaust Manifold. Exhaust manifold with integrated catalytic converter standard grade federal (except California). LEV2 ULEV (Ultra Low Emissions Vehicle). Not for sale or use in the state of California.

        • PRICE: 629.99
        • Location:: Federal
        • Inlet Gasket Included: Yes
        • Converter Body Material: Stainless Steel
        • Overall Length: 21.875in
        • Converter Body Length: 6.125in
        • Inlet Type: Flanged
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Type: One-Piece
        • Sensor Port Count: 1
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Outlet Gasket Included: Yes
        • Clamps Included: No
        • Outlet Type: Flanged
        • Finish: Stainless Steel
        • Grade Type: Regular

      • Sponsored
        Sponsored
        MagnaFlow OEM Grade Federal EPA Compliant Universal Catalytic Converter 2.25in 51205 for 2009 Toyota Camry
        • Part # 51205
        • SKU # 544767
        • Location: Federal

        Application: Universal - Requires cut and weld

        Notes: Catalytic Converter. Cutting and welding required during installation. Universal oem grade federal (exc.ca). Not for sale or use in the state of California.

        • PRICE: 254.99
        • Location:: Federal
        • Outlet Quantity: 1
        • Hangers Included: No
        • Air Tube Count: 0
        • Inlet Type: Weld-On
        • Heat Shield Attached: Yes
        • Body Length: 9in
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Inlet Orientation: Straight
        • Inlet Quantity: 1
        • Finish: Stainless Steel
        • Heat Shield Material: Aluminized Steel
        • Universal Or Specific Fit: Universal
        • Body Shape: Round
        • Oxygen Sensor Location: None
        • Inlet Gasket Included: No
        • Overall Length: 13in
        • Body Width: 4.25in
        • Substrate Material: Ceramic
        • Outlet Inside Diameter: 2.25in
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Sensor Port Count: 0
        • Inlet Inside Diameter: 2.25in
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Body Height: 4.375in
        • Outlet Type: Weld-On
        • Outlet Orientation: Straight
        • Grade Type: Premium Replacement

      • Sponsored
        Sponsored
        MagnaFlow OEM Grade Federal EPA Compliant Manifold Catalytic Converter 49291 for 2009 Toyota Camry
        • Part # 49291
        • SKU # 253631
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Catalytic Converter with Integrated Exhaust Manifold. Exhaust manifold with integrated catalytic converter OEM grade federal (except California). LEV2 ULEV (Ultra Low Emissions Vehicle). Not for sale or use in the state of California.

        • PRICE: 831.99
        • Location:: Federal
        • Inlet Gasket Included: Yes
        • Converter Body Material: Stainless Steel
        • Overall Length: 20.625in
        • Converter Body Length: 6.25in
        • Inlet Type: Flanged
        • CARB Executive Order Number: No
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Type: One-Piece
        • Sensor Port Count: 1
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Outlet Gasket Included: Yes
        • Clamps Included: No
        • Outlet Type: Flanged
        • Finish: Stainless Steel
        • Grade Type: Regular

      • Sponsored
        Sponsored
        MagnaFlow OEM Grade Federal EPA Compliant Manifold Catalytic Converter 52017 for 2009 Toyota Camry
        • Part # 52017
        • SKU # 103644
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Front, Catalytic Converter with Integrated Exhaust Manifold. Exhaust manifold with integrated catalytic converter OEM grade federal (except California). Not for sale or use in the state of California.

        • PRICE: 997.99
        • Location:: Federal
        • Inlet Gasket Included: Yes
        • Converter Body Material: Stainless Steel
        • Overall Length: 15in
        • Converter Body Length: 7.75in
        • Inlet Type: Flanged
        • CARB Executive Order Number: No
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Type: One-Piece
        • Sensor Port Count: 1
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: Yes
        • Outlet Gasket Included: Yes
        • Clamps Included: No
        • Outlet Type: Flanged
        • Finish: Stainless Steel
        • Grade Type: Regular

      • Sponsored
        Sponsored
        MagnaFlow OEM Grade Federal EPA Compliant Direct Fit Catalytic Converter 49556 for 2009 Toyota Camry
        • Part # 49556
        • SKU # 75034
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Catalytic Converter. Direct-fit oem grade federal (exc.ca). Not for sale or use in the state of California.

        • PRICE: 675.99
        • Location:: Federal
        • Universal Or Specific Fit: Specific
        • Oxygen Sensor Location: Pre Converter
        • Inlet Gasket Included: Yes
        • Overall Length: 47.5in
        • Hangers Included: Yes
        • Inlet Type: Bolt-On
        • Air Tube Count: 0
        • Body Width: 7.0
        • Heat Shield Attached: Yes
        • Substrate Material: Ceramic
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Outlet Inside Diameter: 3.0
        • Inlet Inside Diameter: 3.0
        • Sensor Port Count: 1
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Body Length: 12.0
        • Outlet Gasket Included: Yes
        • Clamps Included: No
        • Outlet Type: Bolt-On
        • Finish: Stainless Steel
        • Grade Type: Regular
        • Heat Shield Material: Aluminized Steel

      • Sponsored
        Sponsored
        Dorman Exhaust Manifold 674-846 for 2009 Toyota Camry
        • Part # 674-846
        • SKU # 971853
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Front, Catalytic Converter with Integrated Exhaust Manifold. Carb compliant: no.

        • PRICE: 497.99
        • Location:: Federal
        • Inlet Port Shape: Round
        • Outlet Mounting Hole Quantity: 6
        • Inlet Mounting Hardware Included: Yes
        • Inlet Gasket Included: Yes
        • Outlet Mounting Hardware Included: Yes
        • Color: Natural
        • Converter Body Material: Stainless Steel
        • California Air Resources Board (CARB) Certified: No
        • Finish: Natural
        • Grade Type: Regular

      • Sponsored
        Sponsored
        Dorman Exhaust Manifold 674-480 for 2009 Toyota Camry
        • Part # 674-480
        • SKU # 215200
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Front, Catalytic Converter with Integrated Exhaust Manifold. With Partial Zero Emissions Vehicle (PZEV). Carb compliant: no.

        • PRICE: 611.99
        • Location:: Federal
        • Inlet Port Shape: Round
        • Outlet Mounting Hole Quantity: 5
        • Converter Body Material: Cast Iron
        • Color: Natural
        • Outlet Quantity: 1
        • Overall Length: 17.5in
        • Converter Body Length: 6.5in
        • Air Tube Count: 1
        • Sensor Port Count: 1
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: Yes
        • Inlet Mounting Hole Quantity: 2
        • Outlet Gasket Included: No
        • California Air Resources Board (CARB) Certified: No
        • Outlet Type: Flanged
        • Inlet Quantity: 1
        • Finish: Natural
        • Grade Type: Regular

      • Sponsored
        Sponsored
        Dorman Exhaust Manifold 674-847 for 2009 Toyota Camry
        • Part # 674-847
        • SKU # 971857
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Rear, Catalytic Converter with Integrated Exhaust Manifold. Carb compliant: no.

        • PRICE: 531.99
        • Location:: Federal
        • Inlet Port Shape: Round
        • Outlet Mounting Hole Quantity: 6
        • Inlet Mounting Hardware Included: Yes
        • Inlet Gasket Included: Yes
        • Outlet Mounting Hardware Included: Yes
        • Color: Natural
        • Converter Body Material: Stainless Steel
        • California Air Resources Board (CARB) Certified: No
        • Finish: Natural
        • Grade Type: Regular

      • Sponsored
        Sponsored
        Dorman Exhaust Manifold 674-044 for 2009 Toyota Camry
        • Part # 674-044
        • SKU # 896441
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Front, Catalytic Converter with Integrated Exhaust Manifold. Carb compliant: no. With ULEV California emissions.

        • PRICE: 769.99
        • Location:: Federal
        • Inlet Port Shape: Round
        • Outlet Mounting Hole Quantity: 2
        • Inlet Gasket Included: Yes
        • Color: Natural
        • Converter Body Material: Stainless Steel
        • Outlet Quantity: 1
        • Overall Length: 22in
        • Converter Body Length: 4in
        • Air Tube Count: 0
        • CARB Executive Order Number: Not Carb Compliant
        • Sensor Port Count: 1
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: Yes
        • Inlet Mounting Hole Quantity: 6
        • California Air Resources Board (CARB) Certified: No
        • Outlet Type: Flanged
        • Inlet Quantity: 1
        • Grade Type: Regular

      • Sponsored
        Sponsored
        Dorman Exhaust Manifold 674-050 for 2009 Toyota Camry
        • Part # 674-050
        • SKU # 1013504
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Front, Catalytic Converter with Integrated Exhaust Manifold. Carb compliant: no.

        • PRICE: 589.99
        • Location:: Federal

      • Sponsored
        Sponsored
        AP Universal Federal Catalytic Converter 608705 for 2009 Toyota Camry
        • Part # 608705
        • SKU # 368993
        • Location: Federal

        Application: Universal - Requires cut and weld

        Notes: Rear. Select + Plus. Not For Sale or Use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details

        • PRICE: 619.99
        • Location:: Federal

      • Sponsored
        Sponsored
        AP Universal Federal Catalytic Converter 608265 for 2009 Toyota Camry
        • Part # 608265
        • SKU # 368962
        • Location: Federal

        Application: Universal - Requires cut and weld

        Notes: EPA Enhanced OBDII Converter. Rear. Not For Sale or Use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details

        • PRICE: 301.99
        • Location:: Federal

      • Sponsored
        Sponsored
        AP Exhaust Direct Fit Federal Catalytic Converter 643075 for 2009 Toyota Camry
        • Part # 643075
        • SKU # 1076544
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Rear. Not For Sale or Use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details

        • PRICE: 657.99
        • Location:: Federal

      • Sponsored
        Sponsored
        AP Exhaust Exhaust Manifold 641303 for 2009 Toyota Camry
        • Part # 641303
        • SKU # 1075659
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Manifold converter, Exhaust manifold with integrated catalytic converter. Front. ULEV emissions. Not for sale or use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details.

        • PRICE: 545.99
        • Location:: Federal

      • Sponsored
        Sponsored
        AP Exhaust Direct Fit Federal Catalytic Converter 643001 for 2009 Toyota Camry
        • Part # 643001
        • SKU # 1076401
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Rear. US built. Not for sale or use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details.

        • PRICE: 488.99
        • Location:: Federal

      • Sponsored
        Sponsored
        AP Exhaust Exhaust Manifold 641304 for 2009 Toyota Camry
        • Part # 641304
        • SKU # 1075800
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Manifold converter, Exhaust manifold with integrated catalytic converter. Front. PZEV Emissions. Not for sale or use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details.

        • PRICE: 951.99
        • Location:: Federal

      • Sponsored
        Sponsored
        AP Exhaust Exhaust Manifold 641293 for 2009 Toyota Camry
        • Part # 641293
        • SKU # 1075940
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Manifold converter, Exhaust manifold with integrated catalytic converter. Front Right. Firewall Side. Not for sale or use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details.

        • PRICE: 574.99
        • Location:: Federal