2005 Toyota Corolla Catalytic Converter

Application: OE Direct Fit - Factory mounting style

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. 5TYXV01.8VMA. Certification level : LEV1 low emissions vehicle. Direct-fit California OBDII converters. CARB executive order D-193-96. Legal for use in the state of California, New York and Maine.

• PRICE: 1266.99
• Location:: CARB
• Hangers Included: No
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: No
• Body Length: 32.1
• Outlet Gasket Included: No
• Clamps Included: No
• Finish: Stainless Steel
• Heat Shield Material: None
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Post Converter
• Inlet Gasket Included: Yes
• Overall Length: 32.125in
• Mounting Hardware Included: Yes
• Body Width: 32.1
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.25
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Inlet Inside Diameter: 2.25
• Sensor Port Count: 1
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Outlet Type: Weld-On
• Grade Type: Regular

Application: OE Direct Fit - Factory mounting style

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. 5TYXV01.8PEA. Direct-fit California OBDII converters. CARB executive order D-193-133. Certification level : LEV2 ultra low emissions vehicle. Legal for use in the state of California, New York and Maine.

• PRICE: 1241.99
• Location:: CARB
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Post Converter
• Inlet Gasket Included: Yes
• Mounting Hardware Included: Yes
• Overall Length: 33.125in
• Hangers Included: No
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: No
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Inlet Mounting Hardware Included: No
• Sensor Port Count: 2
• Outlet Mounting Hardware Included: No
• Outlet Gasket Included: No
• Clamps Included: No
• Outlet Type: Clamp-On
• Finish: Stainless Steel
• Grade Type: Regular
• Heat Shield Material: None

Application: Universal - Requires cut and weld

Notes: Rear, Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. 5TYXV01.8PEA. Cutting and welding required during installation. OEM spec. 2" universal California OBDII catalytic converter. CARB executive order D-193-133. Certification level : LEV2 ultra low emissions vehicle. Legal for use in the state of California, New York and Maine.

• PRICE: 376.99
• Location:: CARB
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 9in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Round
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Mounting Hardware Included: No
• Overall Length: 13in
• Body Width: 4.375in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2in
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 4in
• Outlet Type: Weld-On
• Outlet Orientation: Straight

Application: Universal - Requires cut and weld

Notes: Front, Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. 5TYXV01.8VMA. Cutting and welding required during installation. OEM spec. Certification level : LEV1 low emissions vehicle. CARB executive order D-193-96. 2.25" universal California OBDII catalytic converter. Legal for use in the state of California, New York and Maine.

• PRICE: 504.99
• Location:: CARB
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 9in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Round
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Overall Length: 13in
• Body Width: 4.375in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2.5in
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2.25in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 4.375in
• Outlet Type: Weld-On
• Outlet Orientation: Straight
• Grade Type: Premium Replacement

Application: Universal - Requires cut and weld

Notes: Rear, Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. 5TYXV01.8PEA. Cutting and welding required during installation. OEM spec. 2.25" universal California OBDII catalytic converter. CARB executive order D-193-133. Certification level : LEV2 ultra low emissions vehicle. Legal for use in the state of California, New York and Maine.

• PRICE: 376.99
• Location:: CARB
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 9in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Round
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Overall Length: 13in
• Body Width: 4.375in
• Substrate Material: Ceramic
• Outlet Inside Diameter: 1.75in
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2.25in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 4in
• Outlet Type: Weld-On
• Outlet Orientation: Straight

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. 5TYXV01.8VRA. Cutting and welding required during installation. OEM spec. Certification level : LEV1 low emissions vehicle. 2.25" universal California OBDII catalytic converter. CARB executive order D-193-113. Legal for use in the state of California, New York and Maine.

• PRICE: 827.99
• Location:: CARB
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 12in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Oval
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Mounting Hardware Included: No
• Overall Length: 16in
• Body Width: 6.375in
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.25in
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2.25in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 3.75in
• Outlet Type: Weld-On
• Outlet Orientation: Straight

Application: Universal - Requires cut and weld

Notes: Front, Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. 5TYXV01.8PEA. Cutting and welding required during installation. OEM spec. 2.25" universal California OBDII catalytic converter. CARB executive order D-193-133. Certification level : LEV2 ultra low emissions vehicle. Legal for use in the state of California, New York and Maine.

• PRICE: 567.99
• Location:: CARB
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: No
• Body Length: 7in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: None
• Universal Or Specific Fit: Universal
• Body Shape: Round
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Overall Length: 7in
• Mounting Hardware Included: No
• Body Width: 4in
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.25in
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2.25in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 4in
• Outlet Type: Weld-On
• Outlet Orientation: Straight

Application: Universal - Requires cut and weld

Notes: Rear, Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. 5TYXV01.8VMA. Cutting and welding required during installation. OEM spec. Certification level : LEV1 low emissions vehicle. CARB executive order D-193-96. 2.25" universal California OBDII catalytic converter. Legal for use in the state of California, New York and Maine.

• PRICE: 688.99
• Location:: CARB
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 9in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Round
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Overall Length: 13in
• Body Width: 4.375in
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.25in
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2.25in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 4.375in
• Outlet Type: Weld-On
• Outlet Orientation: Straight
• Grade Type: Premium Replacement

Application: OE Direct Fit - Factory mounting style

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. 5TYXV01.8VRA. Certification level : LEV1 low emissions vehicle. Direct-fit California OBDII converters. CARB executive order D-193-139. Legal for use in the state of California, New York and Maine.

• PRICE: 1674.99
• Location:: CARB
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Pre and Post Converter
• Inlet Gasket Included: No
• Mounting Hardware Included: Yes
• Overall Length: 84in
• Hangers Included: Yes
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: No
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Inlet Mounting Hardware Included: No
• Sensor Port Count: 2
• Outlet Mounting Hardware Included: No
• Outlet Gasket Included: No
• Clamps Included: Yes
• Outlet Type: Bolt-On
• Finish: Stainless Steel
• Grade Type: Regular
• Heat Shield Material: None

Application: Universal - Requires cut and weld

Notes: HM Grade converter. Cutting and welding required during installation. Not for sale or use in the state of California.

• PRICE: 221.99
• Location:: Federal
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 9in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Round
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Mounting Hardware Included: No
• Overall Length: 13in
• Body Width: 4.375in
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.25in
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2.25in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 4.375in
• Outlet Type: Weld-On
• Outlet Orientation: Straight
• Grade Type: Regular

Application: OE Direct Fit - Factory mounting style

Notes: Catalytic Converter. Direct-fit oem grade federal (exc.ca). Not for sale or use in the state of California.

• PRICE: 931.99
• Location:: Federal
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Post Converter
• Inlet Gasket Included: Yes
• Overall Length: 33.25in
• Hangers Included: No
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Body Width: 7.625
• Heat Shield Attached: No
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.25
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Inlet Inside Diameter: 2.25
• Sensor Port Count: 1
• Inlet Mounting Hardware Included: No
• Body Length: 32.25
• Outlet Mounting Hardware Included: No
• Outlet Gasket Included: No
• Clamps Included: No
• Outlet Type: Clamp-On
• Finish: Stainless Steel
• Grade Type: Regular
• Heat Shield Material: None

Application: OE Direct Fit - Factory mounting style

Notes: Catalytic Converter. Direct-fit hm grade federal (except California). Not for sale or use in the state of California.

• PRICE: 744.99
• Location:: Federal
• Body Width: 7.625
• Universal Or Specific Fit: Direct OE Replacement
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.5
• Body Material: Stainless Steel
• Inlet Inside Diameter: 2.5
• Body Length: 32.25
• Overall Length: 32.25
• Grade Type: OEM Standard

Application: Universal - Requires cut and weld

Notes: Front, rear, Catalytic Converter. Cutting and welding required during installation. Universal oem grade federal (exc.ca). Not for sale or use in the state of California.

• PRICE: 241.99
• Location:: Federal
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 9in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Round
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Overall Length: 13in
• Body Width: 4.25in
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.25in
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2.25in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 4.375in
• Outlet Type: Weld-On
• Outlet Orientation: Straight
• Grade Type: Premium Replacement

Application: OE Direct Fit - Factory mounting style

Notes: Catalytic Converter. Direct-fit oem grade federal (exc.ca). Not for sale or use in the state of California.

• PRICE: 849.99
• Location:: Federal
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Pre and Post Converter
• Inlet Gasket Included: Yes
• Overall Length: 84in
• Hangers Included: Yes
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: No
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Inlet Mounting Hardware Included: Yes
• Sensor Port Count: 2
• Outlet Mounting Hardware Included: No
• Outlet Gasket Included: Yes
• Clamps Included: Yes
• Outlet Type: Bolt-On
• Finish: Stainless Steel
• Grade Type: Regular
• Heat Shield Material: None

Application: OE Direct Fit - Factory mounting style

Notes: Built to 04/2005. Requires Resonator Pipe #68432 to Complete Installation. Not for sale or use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details.

• PRICE: 751.99
• Location:: Federal