2006 Toyota Corolla Catalytic Converter

Buy Online. Pick Up In-Store.

What are you working on today?

Get an exact fit for your 2006 Toyota Corolla

1-12 of 12 Results

1-12 of 12 Results
      • Sponsored
        Sponsored
        MagnaFlow California CARB Compliant Universal Catalytic Converter 2.25in 551005 for 2006 Toyota Corolla
        • Part # 551005
        • SKU # 893702
        • Location: CARB

        Application: Universal - Requires cut and weld

        Notes: Front, Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. 6TYXV01.8PEA. Cutting and welding required during installation. OEM spec. 2.25" universal California OBDII catalytic converter. CARB executive order D-193-133. Certification level : LEV2 ultra low emissions vehicle. Legal for use in the state of California, New York and Maine.

        • PRICE: 567.99
        • Location:: CARB
        • Outlet Quantity: 1
        • Hangers Included: No
        • Air Tube Count: 0
        • Inlet Type: Weld-On
        • Heat Shield Attached: No
        • Body Length: 7in
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Inlet Orientation: Straight
        • Inlet Quantity: 1
        • Finish: Stainless Steel
        • Heat Shield Material: None
        • Universal Or Specific Fit: Universal
        • Body Shape: Round
        • Oxygen Sensor Location: None
        • Inlet Gasket Included: No
        • Overall Length: 7in
        • Mounting Hardware Included: No
        • Body Width: 4in
        • Substrate Material: Ceramic
        • Outlet Inside Diameter: 2.25in
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Sensor Port Count: 0
        • Inlet Inside Diameter: 2.25in
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Body Height: 4in
        • Outlet Type: Weld-On
        • Outlet Orientation: Straight

      • Sponsored
        Sponsored
        MagnaFlow California CARB Compliant Universal Catalytic Converter 2in 557404 for 2006 Toyota Corolla
        • Part # 557404
        • SKU # 1078527
        • Location: CARB

        Application: Universal - Requires cut and weld

        Notes: Rear, Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. 6TYXV01.8PEA. Cutting and welding required during installation. OEM spec. 2" universal California OBDII catalytic converter. CARB executive order D-193-133. Certification level : LEV2 ultra low emissions vehicle. Legal for use in the state of California, New York and Maine.

        • PRICE: 376.99
        • Location:: CARB
        • Outlet Quantity: 1
        • Hangers Included: No
        • Air Tube Count: 0
        • Inlet Type: Weld-On
        • Heat Shield Attached: Yes
        • Body Length: 9in
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Inlet Orientation: Straight
        • Inlet Quantity: 1
        • Finish: Stainless Steel
        • Heat Shield Material: Aluminized Steel
        • Universal Or Specific Fit: Universal
        • Body Shape: Round
        • Oxygen Sensor Location: None
        • Inlet Gasket Included: No
        • Mounting Hardware Included: No
        • Overall Length: 13in
        • Body Width: 4.375in
        • Substrate Material: Ceramic
        • Tube Material: Stainless Steel
        • Outlet Inside Diameter: 2in
        • Body Material: Stainless Steel
        • Sensor Port Count: 0
        • Inlet Inside Diameter: 2in
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Body Height: 4in
        • Outlet Type: Weld-On
        • Outlet Orientation: Straight

      • Sponsored
        Sponsored
        MagnaFlow California CARB Compliant Universal Catalytic Converter 2.25in 557405 for 2006 Toyota Corolla
        • Part # 557405
        • SKU # 1078286
        • Location: CARB

        Application: Universal - Requires cut and weld

        Notes: Rear, Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. 6TYXV01.8PEA. Cutting and welding required during installation. OEM spec. 2.25" universal California OBDII catalytic converter. CARB executive order D-193-133. Certification level : LEV2 ultra low emissions vehicle. Legal for use in the state of California, New York and Maine.

        • PRICE: 376.99
        • Location:: CARB
        • Outlet Quantity: 1
        • Hangers Included: No
        • Air Tube Count: 0
        • Inlet Type: Weld-On
        • Heat Shield Attached: Yes
        • Body Length: 9in
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Inlet Orientation: Straight
        • Inlet Quantity: 1
        • Finish: Stainless Steel
        • Heat Shield Material: Aluminized Steel
        • Universal Or Specific Fit: Universal
        • Body Shape: Round
        • Oxygen Sensor Location: None
        • Inlet Gasket Included: No
        • Overall Length: 13in
        • Body Width: 4.375in
        • Substrate Material: Ceramic
        • Outlet Inside Diameter: 1.75in
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Sensor Port Count: 0
        • Inlet Inside Diameter: 2.25in
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Body Height: 4in
        • Outlet Type: Weld-On
        • Outlet Orientation: Straight

      • Sponsored
        Sponsored
        MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 551461 for 2006 Toyota Corolla
        • Part # 551461
        • SKU # 1078498
        • Location: CARB

        Application: OE Direct Fit - Factory mounting style

        Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. Engine code 1ZZ-FE. 6TYXV01.8PEA. Direct-fit California OBDII converters. CARB executive order D-193-133. Certification level : LEV2 ultra low emissions vehicle. Legal for use in the state of California, New York and Maine.

        • PRICE: 1241.99
        • Location:: CARB
        • Universal Or Specific Fit: Specific
        • Oxygen Sensor Location: Post Converter
        • Inlet Gasket Included: Yes
        • Mounting Hardware Included: Yes
        • Overall Length: 33.125in
        • Hangers Included: No
        • Inlet Type: Bolt-On
        • Air Tube Count: 0
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Inlet Mounting Hardware Included: No
        • Sensor Port Count: 2
        • Outlet Mounting Hardware Included: No
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Outlet Type: Clamp-On
        • Finish: Stainless Steel
        • Grade Type: Regular
        • Heat Shield Material: None

      • Sponsored
        Sponsored
        MagnaFlow California CARB Compliant Universal Catalytic Converter 2.25in 448305 for 2006 Toyota Corolla
        • Part # 448305
        • SKU # 1114890
        • Location: CARB

        Application: Universal - Requires cut and weld

        Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. 6TYXV01.8VRA. Cutting and welding required during installation. OEM spec. Certification level : LEV1 low emissions vehicle. 2.25" universal California OBDII catalytic converter. CARB executive order D-193-113. Legal for use in the state of California, New York and Maine.

        • PRICE: 827.99
        • Location:: CARB
        • Outlet Quantity: 1
        • Hangers Included: No
        • Air Tube Count: 0
        • Inlet Type: Weld-On
        • Heat Shield Attached: Yes
        • Body Length: 12in
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Inlet Orientation: Straight
        • Inlet Quantity: 1
        • Finish: Stainless Steel
        • Heat Shield Material: Aluminized Steel
        • Universal Or Specific Fit: Universal
        • Body Shape: Oval
        • Oxygen Sensor Location: None
        • Inlet Gasket Included: No
        • Mounting Hardware Included: No
        • Overall Length: 16in
        • Body Width: 6.375in
        • Substrate Material: Ceramic
        • Outlet Inside Diameter: 2.25in
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Sensor Port Count: 0
        • Inlet Inside Diameter: 2.25in
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Body Height: 3.75in
        • Outlet Type: Weld-On
        • Outlet Orientation: Straight

      • Sponsored
        Sponsored
        MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 4481458 for 2006 Toyota Corolla
        • Part # 4481458
        • SKU # 1078339
        • Location: CARB

        Application: OE Direct Fit - Factory mounting style

        Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. 6TYXV01.8VRA. Certification level : LEV1 low emissions vehicle. Direct-fit California OBDII converters. CARB executive order D-193-139. Legal for use in the state of California, New York and Maine.

        • PRICE: 1674.99
        • Location:: CARB
        • Universal Or Specific Fit: Specific
        • Oxygen Sensor Location: Pre and Post Converter
        • Inlet Gasket Included: No
        • Mounting Hardware Included: Yes
        • Overall Length: 84in
        • Hangers Included: Yes
        • Inlet Type: Bolt-On
        • Air Tube Count: 0
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Inlet Mounting Hardware Included: No
        • Sensor Port Count: 2
        • Outlet Mounting Hardware Included: No
        • Outlet Gasket Included: No
        • Clamps Included: Yes
        • Outlet Type: Bolt-On
        • Finish: Stainless Steel
        • Grade Type: Regular
        • Heat Shield Material: None

      • Sponsored
        Sponsored
        Universal Federal Catalytic Converter 99205HM for 2006 Toyota Corolla
        • Part # 99205HM
        • SKU # 275070
        • Location: Federal

        Application: Universal - Requires cut and weld

        Notes: HM Grade converter. Cutting and welding required during installation. Not for sale or use in the state of California.

        • PRICE: 221.99
        • Location:: Federal
        • Outlet Quantity: 1
        • Hangers Included: No
        • Air Tube Count: 0
        • Inlet Type: Weld-On
        • Heat Shield Attached: Yes
        • Body Length: 9in
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Inlet Orientation: Straight
        • Inlet Quantity: 1
        • Finish: Stainless Steel
        • Heat Shield Material: Aluminized Steel
        • Universal Or Specific Fit: Universal
        • Body Shape: Round
        • Oxygen Sensor Location: None
        • Inlet Gasket Included: No
        • Mounting Hardware Included: No
        • Overall Length: 13in
        • Body Width: 4.375in
        • Substrate Material: Ceramic
        • Outlet Inside Diameter: 2.25in
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Sensor Port Count: 0
        • Inlet Inside Diameter: 2.25in
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Body Height: 4.375in
        • Outlet Type: Weld-On
        • Outlet Orientation: Straight
        • Grade Type: Regular

      • Sponsored
        Sponsored
        MagnaFlow HM Grade Federal EPA Compliant Direct Fit Catalytic Converter 93200 for 2006 Toyota Corolla
        • Part # 93200
        • SKU # 89658
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: HM grade converter. Not for sale or use in the state of California

        • PRICE: 769.99
        • Location:: Federal
        • Body Width: 7.625
        • Universal Or Specific Fit: Direct OE Replacement
        • Substrate Material: Ceramic
        • Outlet Inside Diameter: 2.5
        • Body Material: Stainless Steel
        • Inlet Inside Diameter: 2.5
        • Body Length: 32.25
        • Overall Length: 32.25
        • Grade Type: OEM Standard

      • Sponsored
        Sponsored
        MagnaFlow OEM Grade Federal EPA Compliant Direct Fit Catalytic Converter 52458 for 2006 Toyota Corolla
        • Part # 52458
        • SKU # 1101956
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: OEM grade converter. XRS model. Not for sale or use in the state of California

        • PRICE: 849.99
        • Location:: Federal
        • Universal Or Specific Fit: Specific
        • Oxygen Sensor Location: Pre and Post Converter
        • Inlet Gasket Included: Yes
        • Overall Length: 84in
        • Hangers Included: Yes
        • Inlet Type: Bolt-On
        • Air Tube Count: 0
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Inlet Mounting Hardware Included: Yes
        • Sensor Port Count: 2
        • Outlet Mounting Hardware Included: No
        • Outlet Gasket Included: Yes
        • Clamps Included: Yes
        • Outlet Type: Bolt-On
        • Finish: Stainless Steel
        • Grade Type: Regular
        • Heat Shield Material: None

      • Sponsored
        Sponsored
        MagnaFlow OEM Grade Federal EPA Compliant Universal Catalytic Converter 2.25in 51205 for 2006 Toyota Corolla
        • Part # 51205
        • SKU # 544767
        • Location: Federal

        Application: Universal - Requires cut and weld

        Notes: OEM grade converter. Cutting and welding required during installation. Not for sale or use in the state of California

        • PRICE: 241.99
        • Location:: Federal
        • Outlet Quantity: 1
        • Hangers Included: No
        • Air Tube Count: 0
        • Inlet Type: Weld-On
        • Heat Shield Attached: Yes
        • Body Length: 9in
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Inlet Orientation: Straight
        • Inlet Quantity: 1
        • Finish: Stainless Steel
        • Heat Shield Material: Aluminized Steel
        • Universal Or Specific Fit: Universal
        • Body Shape: Round
        • Oxygen Sensor Location: None
        • Inlet Gasket Included: No
        • Overall Length: 13in
        • Body Width: 4.25in
        • Substrate Material: Ceramic
        • Outlet Inside Diameter: 2.25in
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Sensor Port Count: 0
        • Inlet Inside Diameter: 2.25in
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Body Height: 4.375in
        • Outlet Type: Weld-On
        • Outlet Orientation: Straight
        • Grade Type: Premium Replacement

      • Sponsored
        Sponsored
        MagnaFlow OEM Grade Federal EPA Compliant Direct Fit Catalytic Converter 49461 for 2006 Toyota Corolla
        • Part # 49461
        • SKU # 980062
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: OEM Grade converter. Engine code: 1ZZ-FE. Not for sale or use in the state of California.

        • PRICE: 931.99
        • Location:: Federal
        • Universal Or Specific Fit: Specific
        • Oxygen Sensor Location: Post Converter
        • Inlet Gasket Included: Yes
        • Overall Length: 33.25in
        • Hangers Included: No
        • Inlet Type: Bolt-On
        • Air Tube Count: 0
        • Body Width: 7.625
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Outlet Inside Diameter: 2.25
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Inlet Inside Diameter: 2.25
        • Sensor Port Count: 1
        • Inlet Mounting Hardware Included: No
        • Body Length: 32.25
        • Outlet Mounting Hardware Included: No
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Outlet Type: Clamp-On
        • Finish: Stainless Steel
        • Grade Type: Regular
        • Heat Shield Material: None

      • Sponsored
        Sponsored
        AP Exhaust Direct Fit Federal Catalytic Converter 642165 for 2006 Toyota Corolla
        • Part # 642165
        • SKU # 1073809
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: US built. Requires Resonator Pipe #58494 to Complete Installation. Not for sale or use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details.

        • PRICE: 751.99
        • Location:: Federal

      About


      2006 Toyota Corolla Catalytic Converter

      The catalytic converter for 2006 Toyota Corolla models is a cylindrical metal shell that contains a honeycomb material with catalyst materials embedded. As exhaust passes through, the catalyst reacts with it to burn off harmful compounds before they enter the atmosphere. While it's meant to last for many years, a bad catalytic converter can happen, and if it does, AutoZone has What It Takes To Do The Job Right.

      When To Change Your Catalytic Converter

      There's no set interval for changing a 2006 Toyota Corolla catalytic converter, and many will last for 10 years or more. If it fails, you'll experience signs that can include a Check Engine Light on, running issues, backfiring, a bad exhaust smell, rattling from under your Corolla, or high temperatures from under the car.



      How to Replace Your 2006 Toyota Corolla Catalytic Converter

      It's a bigger job than an oil and filter change, but experienced DIYers can still tackle a catalytic converter replacement at home. With the car lifted, remove the old catalytic converter with a saw or, if possible, by unclamping or unbolting it. Then, install your new part with new hardware or by having it welded in. Test it with a drive, and remember to clear the Check Engine Light.

      Shop for all your car parts at AutoZone where you'll find everything you need from popular brands like MagnaFlow and AP Exhaust including a 2006 Corolla catalytic converter sorted by year, make, model, and engine size. Get your parts quickly with options like Free Next-Day Delivery and Same-Day In-Store or Curbside Pickup so you'll be back on the road in no time.