2001 Toyota Sequoia Catalytic Converter

Buy Online. Pick Up In-Store.

What are you working on today?

Get an exact fit for your 2001 Toyota Sequoia

1-14 of 14 Results

1-14 of 14 Results
      • Sponsored
        Sponsored
        MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 4551061 for 2001 Toyota Sequoia
        • Part # 4551061
        • SKU # 1078380
        • Location: CARB

        Application: OE Direct Fit - Factory mounting style

        Notes: Right, Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. 1TYXT04.7JBW. Certification level : LEV1 ultra low emissions vehicle. Direct-fit California OBDII converters. CARB executive order D-193-145. Legal for use in the state of California, New York and Maine.

        • PRICE: 1322.99
        • Location:: CARB
        • Universal Or Specific Fit: Specific
        • Oxygen Sensor Location: Post Converter
        • Inlet Gasket Included: Yes
        • Mounting Hardware Included: Yes
        • Overall Length: 41in
        • Hangers Included: No
        • Inlet Type: Bolt-On
        • Air Tube Count: 0
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Sensor Port Count: 1
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Outlet Gasket Included: Yes
        • Clamps Included: No
        • Outlet Type: Bolt-On
        • Finish: Stainless Steel
        • Grade Type: Regular
        • Heat Shield Material: None

      • Sponsored
        Sponsored
        MagnaFlow California CARB Compliant Universal Catalytic Converter 2.25in 455005 for 2001 Toyota Sequoia
        • Part # 455005
        • SKU # 458048
        • Location: CARB

        Application: Universal - Requires cut and weld

        Notes: Left, right, Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. 1TYXT04.7JBW. Cutting and welding required during installation. Certification level : LEV1 ultra low emissions vehicle. 2.25" universal California OBDII catalytic converter. CARB executive order D-193-115. Legal for use in the state of California, New York and Maine.

        • PRICE: 1133.99
        • Location:: CARB
        • Outlet Quantity: 1
        • Hangers Included: No
        • Air Tube Count: 0
        • Inlet Type: Weld-On
        • Heat Shield Attached: Yes
        • Body Length: 12in
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Inlet Orientation: Straight
        • Inlet Quantity: 1
        • Finish: Stainless Steel
        • Heat Shield Material: Aluminized Steel
        • Universal Or Specific Fit: Universal
        • Body Shape: Oval
        • Oxygen Sensor Location: None
        • Inlet Gasket Included: No
        • Overall Length: 16in
        • Body Width: 6.375in
        • Substrate Material: Ceramic
        • Outlet Inside Diameter: 2.25in
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Sensor Port Count: 0
        • Inlet Inside Diameter: 2.25in
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Body Height: 3.75in
        • Outlet Type: Weld-On
        • Outlet Orientation: Straight
        • Grade Type: Premium Replacement

      • Sponsored
        Sponsored
        MagnaFlow California CARB Compliant Universal Catalytic Converter 2in 455004 for 2001 Toyota Sequoia
        • Part # 455004
        • SKU # 458069
        • Location: CARB

        Application: Universal - Requires cut and weld

        Notes: Left, right, Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. 1TYXT04.7JBW. Cutting and welding required during installation. OEM spec. Certification level : LEV1 ultra low emissions vehicle. 2" universal California OBDII catalytic converter. CARB executive order D-193-115. Legal for use in the state of California, New York and Maine.

        • PRICE: 1133.99
        • Location:: CARB
        • Outlet Quantity: 1
        • Hangers Included: No
        • Air Tube Count: 0
        • Inlet Type: Weld-On
        • Heat Shield Attached: Yes
        • Body Length: 12in
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Inlet Orientation: Straight
        • Inlet Quantity: 1
        • Finish: Stainless Steel
        • Heat Shield Material: Aluminized Steel
        • Universal Or Specific Fit: Universal
        • Body Shape: Oval
        • Oxygen Sensor Location: None
        • Inlet Gasket Included: No
        • Overall Length: 16in
        • Body Width: 6.375in
        • Substrate Material: Ceramic
        • Tube Material: Stainless Steel
        • Outlet Inside Diameter: 2in
        • Body Material: Stainless Steel
        • Sensor Port Count: 0
        • Inlet Inside Diameter: 2in
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Body Height: 3.75in
        • Outlet Type: Weld-On
        • Outlet Orientation: Straight

      • Sponsored
        Sponsored
        MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 4551060 for 2001 Toyota Sequoia
        • Part # 4551060
        • SKU # 1078454
        • Location: CARB

        Application: OE Direct Fit - Factory mounting style

        Notes: Left, Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. 1TYXT04.7JBW. Certification level : LEV1 ultra low emissions vehicle. Direct-fit California OBDII converters. CARB executive order D-193-145. Legal for use in the state of California, New York and Maine.

        • PRICE: 1391.99
        • Location:: CARB
        • Universal Or Specific Fit: Specific
        • Oxygen Sensor Location: Post Converter
        • Inlet Gasket Included: Yes
        • Overall Length: 55.25in
        • Hangers Included: Yes
        • Inlet Type: Bolt-On
        • Air Tube Count: 0
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Sensor Port Count: 1
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Outlet Gasket Included: Yes
        • Clamps Included: Yes
        • Outlet Type: Bolt-On
        • Finish: Stainless Steel
        • Grade Type: Regular
        • Heat Shield Material: None

      • Sponsored
        Sponsored
        MagnaFlow HM Grade Federal EPA Compliant Universal Catalytic Converter 2.25in 99005HM for 2001 Toyota Sequoia
        • Part # 99005HM
        • SKU # 461339
        • Location: Federal

        Application: Universal - Requires cut and weld

        Notes: HM Grade Converter. Left or right. Cutting and welding required during installation. Not for sale or use in the state of California.

        • PRICE: 261.99
        • Location:: Federal
        • Outlet Quantity: 1
        • Hangers Included: No
        • Air Tube Count: 0
        • Inlet Type: Weld-On
        • Heat Shield Attached: Yes
        • Body Length: 12in
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Inlet Orientation: Straight
        • Inlet Quantity: 1
        • Finish: Stainless Steel
        • Heat Shield Material: Aluminized Steel
        • Universal Or Specific Fit: Universal
        • Body Shape: Oval
        • Oxygen Sensor Location: None
        • Inlet Gasket Included: No
        • Mounting Hardware Included: No
        • Overall Length: 16in
        • Body Width: 5.5in
        • Substrate Material: Ceramic
        • Outlet Inside Diameter: 2.25in
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Sensor Port Count: 0
        • Inlet Inside Diameter: 2.25in
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Body Height: 3.75in
        • Outlet Type: Weld-On
        • Outlet Orientation: Straight
        • Grade Type: Regular

      • Sponsored
        Sponsored
        MagnaFlow HM Grade Federal EPA Compliant Direct Fit Catalytic Converter 93376 for 2001 Toyota Sequoia
        • Part # 93376
        • SKU # 937878
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: HM Grade Converter. Left. Not for sale or use in the state of California.

        • PRICE: 696.99
        • Location:: Federal

      • Sponsored
        Sponsored
        MagnaFlow HM Grade Federal EPA Compliant Direct Fit Catalytic Converter 93377 for 2001 Toyota Sequoia
        • Part # 93377
        • SKU # 420
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: HM Grade Converter. Right. Not for sale or use in the state of California.

        • PRICE: 654.99
        • Location:: Federal
        • Body Width: 8
        • Universal Or Specific Fit: Direct OE Replacement
        • Substrate Material: Ceramic
        • Outlet Inside Diameter: 2
        • Body Material: Stainless Steel
        • Inlet Inside Diameter: 2
        • Body Length: 41.375
        • Overall Length: 41.375
        • Grade Type: OEM Standard

      • Sponsored
        Sponsored
        MagnaFlow OEM Grade Federal EPA Compliant Universal Catalytic Converter 2in 51204 for 2001 Toyota Sequoia
        • Part # 51204
        • SKU # 544726
        • Location: Federal

        Application: Universal - Requires cut and weld

        Notes: Left, right, Catalytic Converter. Cutting and welding required during installation. Universal oem grade federal (exc.ca). Not for sale or use in the state of California.

        • PRICE: 241.99
        • Location:: Federal
        • Outlet Quantity: 1
        • Hangers Included: No
        • Air Tube Count: 0
        • Inlet Type: Weld-On
        • Heat Shield Attached: Yes
        • Body Length: 9in
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Inlet Orientation: Straight
        • Inlet Quantity: 1
        • Finish: Stainless Steel
        • Heat Shield Material: Aluminized Steel
        • Universal Or Specific Fit: Universal
        • Body Shape: Round
        • Oxygen Sensor Location: None
        • Inlet Gasket Included: No
        • Overall Length: 13in
        • Body Width: 4.25in
        • Substrate Material: Ceramic
        • Tube Material: Stainless Steel
        • Outlet Inside Diameter: 2in
        • Body Material: Stainless Steel
        • Sensor Port Count: 0
        • Inlet Inside Diameter: 2in
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Body Height: 4.375in
        • Outlet Type: Weld-On
        • Outlet Orientation: Straight
        • Grade Type: Premium Replacement

      • Sponsored
        Sponsored
        MagnaFlow OEM Grade Federal EPA Compliant Direct Fit Catalytic Converter 49577 for 2001 Toyota Sequoia
        • Part # 49577
        • SKU # 269143
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Left, Catalytic Converter. Direct-fit oem grade federal (exc.ca). Not for sale or use in the state of California.

        • PRICE: 871.99
        • Location:: Federal
        • Universal Or Specific Fit: Specific
        • Oxygen Sensor Location: Post Converter
        • Inlet Gasket Included: Yes
        • Overall Length: 59in
        • Hangers Included: Yes
        • Inlet Type: Bolt-On
        • Air Tube Count: 0
        • Body Width: 7.0
        • Heat Shield Attached: Yes
        • Substrate Material: Ceramic
        • Outlet Inside Diameter: 2.0
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Inlet Inside Diameter: 2.0
        • Sensor Port Count: 1
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Body Length: 59.0
        • Outlet Gasket Included: Yes
        • Clamps Included: Yes
        • Outlet Type: Bolt-On
        • Finish: Stainless Steel
        • Grade Type: Regular
        • Heat Shield Material: Aluminized Steel

      • Sponsored
        Sponsored
        MagnaFlow OEM Grade Federal EPA Compliant Direct Fit Catalytic Converter 49578 for 2001 Toyota Sequoia
        • Part # 49578
        • SKU # 253733
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Right, Catalytic Converter. Direct-fit oem grade federal (exc.ca). Not for sale or use in the state of California.

        • PRICE: 804.99
        • Location:: Federal
        • Hangers Included: No
        • Inlet Type: Bolt-On
        • Air Tube Count: 0
        • Heat Shield Attached: No
        • Body Length: 39.25
        • Outlet Gasket Included: Yes
        • Clamps Included: No
        • Finish: Stainless Steel
        • Heat Shield Material: None
        • Universal Or Specific Fit: Specific
        • Oxygen Sensor Location: Post Converter
        • Inlet Gasket Included: Yes
        • Mounting Hardware Included: Yes
        • Overall Length: 39.25in
        • Body Width: 7.0
        • Substrate Material: Ceramic
        • Outlet Inside Diameter: 2.0
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Sensor Port Count: 1
        • Inlet Inside Diameter: 2.0
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Outlet Type: Bolt-On
        • Grade Type: Regular

      • Sponsored
        Sponsored
        AP Universal Federal Catalytic Converter 608735 for 2001 Toyota Sequoia
        • Part # 608735
        • SKU # 368999
        • Location: Federal

        Application: Universal - Requires cut and weld

        Notes: Right or Left. Select + Plus. Not For Sale or Use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details

        • PRICE: 781.99
        • Location:: Federal

      • Sponsored
        Sponsored
        AP Universal Federal Catalytic Converter 608215 for 2001 Toyota Sequoia
        • Part # 608215
        • SKU # 368951
        • Location: Federal

        Application: Universal - Requires cut and weld

        Notes: Left or right. Not For Sale or Use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details

        • PRICE: 291.99
        • Location:: Federal

      • Sponsored
        Sponsored
        AP Exhaust Direct Fit Federal Catalytic Converter 645414 for 2001 Toyota Sequoia
        • Part # 645414
        • SKU # 1076173
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Right. Not For Sale or Use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details

        • PRICE: 629.99
        • Location:: Federal

      • Sponsored
        Sponsored
        AP Exhaust Direct Fit Federal Catalytic Converter 645883 for 2001 Toyota Sequoia
        • Part # 645883
        • SKU # 1076127
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Left. Not For Sale or Use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details

        • PRICE: 684.99
        • Location:: Federal