2010 Toyota Tacoma Catalytic Converter

Buy Online. Pick Up In-Store.

What are you working on today?

Get an exact fit for your 2010 Toyota Tacoma

1-24 of 29 Results

1-24 of 29 Results
  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Manifold Catalytic Converter 5481341 for 2010 Toyota Tacoma
    • Part # 5481341
    • SKU # 1115731
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Manifold converter, Verify EFN (Engine Family Number) found on emission label on vehicle. Exhaust manifold with integrated catalytic converter. Left. CARB Executive Order D-193-146. Engine Family Number ATYXT04.0AEM. Certification Level: LEV2 LEV. Legal for use in the state of California, New York and Maine.

    • PRICE: 1702.99
    • Location:: CARB
    • Inlet Gasket Included: Yes
    • Converter Body Material: Stainless Steel
    • Outlet Quantity: 1
    • Overall Length: 21.75in
    • Converter Body Length: 7in
    • Inlet Type: Flanged
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Type: One-Piece
    • Sensor Port Count: 1
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: Yes
    • Outlet Gasket Included: Yes
    • Clamps Included: No
    • Outlet Type: Flanged
    • Inlet Quantity: 3
    • Finish: Stainless Steel
    • Grade Type: Regular

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Universal Catalytic Converter 2.5in 5491306 for 2010 Toyota Tacoma
    • Part # 5491306
    • SKU # 1102018
    • Location: CARB

    Application: Universal - Requires cut and weld

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. 2.50". Rear. CARB Executive Order D-193-146. Engine Family Number ATYXT02.7AEM. Certification Level: LEV2 LEV. OE Spec. Cutting and welding required during installation. Legal for use in the state of California, New York and Maine.

    • PRICE: 781.99
    • Location:: CARB
    • Outlet Quantity: 1
    • Hangers Included: No
    • Air Tube Count: 0
    • Inlet Type: Weld-On
    • Heat Shield Attached: No
    • Body Length: 9in
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Inlet Orientation: Straight
    • Inlet Quantity: 1
    • Finish: Stainless Steel
    • Heat Shield Material: None
    • Universal Or Specific Fit: Universal
    • Body Shape: Round
    • Oxygen Sensor Location: None
    • Inlet Gasket Included: No
    • Overall Length: 9in
    • Mounting Hardware Included: No
    • Body Width: 5in
    • Substrate Material: Ceramic
    • Tube Material: Stainless Steel
    • Outlet Inside Diameter: 2.5in
    • Body Material: Stainless Steel
    • Sensor Port Count: 0
    • Inlet Inside Diameter: 2.5in
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Height: 5in
    • Outlet Type: Weld-On
    • Outlet Orientation: Straight

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Manifold Catalytic Converter 5481342 for 2010 Toyota Tacoma
    • Part # 5481342
    • SKU # 1115643
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Manifold converter, Verify EFN (Engine Family Number) found on emission label on vehicle. Exhaust manifold with integrated catalytic converter. Right. CARB Executive Order D-193-146. Engine Family Number ATYXT04.0AEM. Certification Level: LEV2 LEV. Legal for use in the state of California, New York and Maine.

    • PRICE: 1731.99
    • Location:: CARB
    • Inlet Gasket Included: Yes
    • Converter Body Material: Stainless Steel
    • Outlet Quantity: 1
    • Overall Length: 22.375in
    • Converter Body Length: 7in
    • Inlet Type: Flanged
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Type: One-Piece
    • Sensor Port Count: 1
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: Yes
    • Outlet Gasket Included: Yes
    • Clamps Included: No
    • Outlet Type: Flanged
    • Inlet Quantity: 3
    • Finish: Stainless Steel
    • Grade Type: Regular

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 5411028 for 2010 Toyota Tacoma
    • Part # 5411028
    • SKU # 243578
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. CARB Executive Order D-193-147. Engine Family Number ATYXT02.7AEH. Certification Level: LEV2 LEV. Legal for use in the state of California, New York and Maine.

    • PRICE: 2226.99
    • Location:: CARB
    • Universal Or Specific Fit: Specific
    • Oxygen Sensor Location: Pre and Post Converter
    • Inlet Gasket Included: Yes
    • Mounting Hardware Included: Yes
    • Overall Length: 44.625in
    • Hangers Included: Yes
    • Inlet Type: Bolt-On
    • Air Tube Count: 0
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 3
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Outlet Gasket Included: Yes
    • Clamps Included: No
    • Outlet Type: Bolt-On
    • Finish: Stainless Steel
    • Grade Type: Regular
    • Heat Shield Material: None

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Universal Catalytic Converter 2.25in 5491305 for 2010 Toyota Tacoma
    • Part # 5491305
    • SKU # 1101904
    • Location: CARB

    Application: Universal - Requires cut and weld

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. 2.25". Left, Right. CARB Executive Order D-193-146. Engine Family Number ATYXT04.0AEM. Certification Level: LEV2 LEV. OE Spec. Cutting and welding required during installation. Legal for use in the state of California, New York and Maine.

    • PRICE: 781.99
    • Location:: CARB
    • Outlet Quantity: 1
    • Hangers Included: No
    • Air Tube Count: 0
    • Inlet Type: Weld-On
    • Heat Shield Attached: No
    • Body Length: 9.125in
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Inlet Orientation: Straight
    • Inlet Quantity: 1
    • Finish: Stainless Steel
    • Heat Shield Material: None
    • Universal Or Specific Fit: Universal
    • Body Shape: Round
    • Oxygen Sensor Location: None
    • Inlet Gasket Included: No
    • Overall Length: 9.125in
    • Mounting Hardware Included: No
    • Body Width: 5in
    • Substrate Material: Ceramic
    • Outlet Inside Diameter: 2.25in
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 0
    • Inlet Inside Diameter: 2.25in
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Height: 5in
    • Outlet Type: Weld-On
    • Outlet Orientation: Straight

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 5491661 for 2010 Toyota Tacoma
    • Part # 5491661
    • SKU # 1102062
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. Right. CARB Executive Order D-193-146. Engine Family Number ATYXT04.0AEM. Certification Level: LEV2 LEV. Legal for use in the state of California, New York and Maine.

    • PRICE: 617.99
    • Location:: CARB
    • Outlet Quantity: 1
    • Hangers Included: No
    • Inlet Type: Bolt-On
    • Air Tube Count: 0
    • Heat Shield Attached: No
    • Body Length: 9.125in
    • Outlet Gasket Included: Yes
    • Clamps Included: No
    • Inlet Quantity: 1
    • Finish: Stainless Steel
    • Heat Shield Material: None
    • Universal Or Specific Fit: Specific
    • Body Shape: Round
    • Oxygen Sensor Location: Pre Converter
    • Inlet Gasket Included: Yes
    • Overall Length: 24.125in
    • Body Width: 4in
    • Substrate Material: Ceramic
    • Outlet Inside Diameter: 2.25in
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 1
    • Inlet Inside Diameter: 2.25in
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Height: 4in
    • Outlet Type: Bolt-On
    • Grade Type: Regular

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 5481703 for 2010 Toyota Tacoma
    • Part # 5481703
    • SKU # 1102053
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. CARB Executive Order D-193-146. Engine Family Number ATYXT02.7AEM. Certification Level: LEV2 LEV. Legal for use in the state of California, New York and Maine.

    • PRICE: 2126.99
    • Location:: CARB
    • Outlet Quantity: 1
    • Hangers Included: Yes
    • Inlet Type: Bolt-On
    • Air Tube Count: 0
    • Heat Shield Attached: No
    • Outlet Gasket Included: Yes
    • Clamps Included: No
    • Inlet Quantity: 1
    • Finish: Stainless Steel
    • Heat Shield Material: None
    • Universal Or Specific Fit: Specific
    • Body Shape: Round
    • Oxygen Sensor Location: Pre and Post Converter
    • Inlet Gasket Included: Yes
    • Mounting Hardware Included: Yes
    • Overall Length: 46.375in
    • Body Width: 4in
    • Substrate Material: Ceramic
    • Tube Material: Stainless Steel
    • Outlet Inside Diameter: 2.5in
    • Body Material: Stainless Steel
    • Inlet Inside Diameter: 2.5in
    • Sensor Port Count: 3
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Height: 4in
    • Outlet Type: Bolt-On
    • Grade Type: Regular

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Universal Catalytic Converter 2.25in 5411335 for 2010 Toyota Tacoma
    • Part # 5411335
    • SKU # 244657
    • Location: CARB

    Application: Universal - Requires cut and weld

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. 2.25". Front. CARB Executive Order D-193-147. Engine Family Number ATYXT02.7AEH. Certification Level: LEV2 LEV. OE Spec. Cutting and welding required during installation. Legal for use in the state of California, New York and Maine.

    • PRICE: 883.99
    • Location:: CARB
    • Outlet Quantity: 1
    • Hangers Included: No
    • Air Tube Count: 0
    • Inlet Type: Weld-On
    • Heat Shield Attached: No
    • Body Length: 11.25in
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Inlet Orientation: Straight
    • Inlet Quantity: 1
    • Finish: Stainless Steel
    • Heat Shield Material: None
    • Universal Or Specific Fit: Universal
    • Body Shape: Round
    • Oxygen Sensor Location: Post Converter
    • Inlet Gasket Included: No
    • Overall Length: 11.25in
    • Mounting Hardware Included: No
    • Body Width: 4in
    • Substrate Material: Ceramic
    • Outlet Inside Diameter: 2.25in
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 1
    • Inlet Inside Diameter: 2.25in
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Height: 4in
    • Outlet Type: Weld-On
    • Outlet Orientation: Straight

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Universal Catalytic Converter 2.5in 5421206 for 2010 Toyota Tacoma
    • Part # 5421206
    • SKU # 243811
    • Location: CARB

    Application: Universal - Requires cut and weld

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. 2.50". Rear. CARB Executive Order D-193-147. Engine Family Number ATYXT02.7AEH. Certification Level: LEV2 LEV. OE Spec. Cutting and welding required during installation. Legal for use in the state of California, New York and Maine.

    • PRICE: 411.99
    • Location:: CARB
    • Outlet Quantity: 1
    • Hangers Included: No
    • Air Tube Count: 0
    • Inlet Type: Weld-On
    • Heat Shield Attached: No
    • Body Length: 9in
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Inlet Orientation: Straight
    • Inlet Quantity: 1
    • Finish: Stainless Steel
    • Heat Shield Material: None
    • Universal Or Specific Fit: Universal
    • Body Shape: Round
    • Oxygen Sensor Location: None
    • Inlet Gasket Included: No
    • Overall Length: 9in
    • Mounting Hardware Included: No
    • Body Width: 4in
    • Substrate Material: Ceramic
    • Tube Material: Stainless Steel
    • Outlet Inside Diameter: 2.5in
    • Body Material: Stainless Steel
    • Sensor Port Count: 0
    • Inlet Inside Diameter: 2.5in
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Height: 4in
    • Outlet Type: Weld-On
    • Outlet Orientation: Straight

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 5491701 for 2010 Toyota Tacoma
    • Part # 5491701
    • SKU # 1102033
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. Left. CARB Executive Order D-193-146. Engine Family Number ATYXT04.0AEM. Certification Level: LEV2 LEV. Legal for use in the state of California, New York and Maine.

    • PRICE: 1041.99
    • Location:: CARB
    • Outlet Quantity: 1
    • Hangers Included: Yes
    • Inlet Type: Bolt-On
    • Air Tube Count: 0
    • Heat Shield Attached: No
    • Body Length: 9.125in
    • Outlet Gasket Included: Yes
    • Clamps Included: Yes
    • Inlet Quantity: 2
    • Finish: Stainless Steel
    • Heat Shield Material: None
    • Universal Or Specific Fit: Specific
    • Body Shape: Round
    • Oxygen Sensor Location: Pre Converter
    • Inlet Gasket Included: Yes
    • Mounting Hardware Included: Yes
    • Overall Length: 39.25in
    • Body Width: 4in
    • Substrate Material: Ceramic
    • Tube Material: Stainless Steel
    • Outlet Inside Diameter: 2.375in
    • Body Material: Stainless Steel
    • Sensor Port Count: 1
    • Inlet Inside Diameter: 2.25in
    • Inlet Mounting Hardware Included: Yes
    • Outlet Mounting Hardware Included: Yes
    • Body Height: 4in
    • Outlet Type: Bolt-On
    • Grade Type: Regular

  • Sponsored
    Sponsored
    MagnaFlow HM Grade Federal EPA Compliant Universal Catalytic Converter 2.5in 99206HM for 2010 Toyota Tacoma
    • Part # 99206HM
    • SKU # 275066
    • Location: Federal

    Application: Universal - Requires cut and weld

    Notes: HM Grade converter. Cutting and welding required during installation. Not for sale or use in the state of California.

    • PRICE: 221.99
    • Location:: Federal
    • Item Grade: Premium Replacement
    • Substrate Material: Ceramic
    • Format: Universal
    • Exhaust Pipe Outlet Connection Type: Single
    • Outlet Diameter (in): 2.5
    • Oxygen Sensor Location: No Port Location
    • Mount Type: Uses New Hangers (Not Included)
    • Housing Material: Stainless Steel
    • CARB Compliant: No
    • Exhaust Pipe Inlet Connection Type: Single
    • Air Tube Adaptable: Not Air Tube Kit Adaptable

  • Sponsored
    Sponsored
    MagnaFlow HM Grade Federal EPA Compliant Direct Fit Catalytic Converter 24487 for 2010 Toyota Tacoma
    • Part # 24487
    • SKU # 937889
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: HM Grade Converter. Not for sale or use in the state of California.

    • PRICE: 839.99
    • Location:: Federal
    • Universal Or Specific Fit: Specific
    • Oxygen Sensor Location: Post Converter
    • Inlet Gasket Included: Yes
    • Overall Length: 45.25in
    • Mounting Hardware Included: Yes
    • Hangers Included: Yes
    • Inlet Type: Bolt-On
    • Air Tube Count: 0
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Inlet Mounting Hardware Included: No
    • Sensor Port Count: 4
    • Outlet Mounting Hardware Included: No
    • Outlet Gasket Included: Yes
    • Clamps Included: No
    • Outlet Type: Bolt-On
    • Finish: Stainless Steel
    • Grade Type: Regular
    • Heat Shield Material: None

  • Sponsored
    Sponsored
    MagnaFlow HM Grade HM Grade Direct Fit Direct Fit Catalytic Converter 93660 for 2010 Toyota Tacoma
    • Part # 93660
    • SKU # 937726
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: HM Grade Converter. Left. Not for sale or use in the state of California.

    • PRICE: 757.99
    • Location:: Federal
    • Item Grade: OEM Standard
    • Substrate Material: Ceramic
    • Format: Pre-Catalytic Converter and Main Catalytic Converter
    • Exhaust Pipe Outlet Connection Type: Bolt On
    • Outlet Diameter (in): 2.5
    • Oxygen Sensor Location: Pre & Post Catalyst
    • Mount Type: Uses Factory Hangers
    • Housing Material: Stainless Steel
    • CARB Compliant: No
    • Exhaust Pipe Inlet Connection Type: Bolt On
    • Air Tube Adaptable: Not Air Tube Kit Adaptable

  • Sponsored
    Sponsored
    MagnaFlow HM Grade Federal EPA Compliant Direct Fit Catalytic Converter 93661 for 2010 Toyota Tacoma
    • Part # 93661
    • SKU # 360
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: HM Grade Converter. Right. Not for sale or use in the state of California.

    • PRICE: 593.99
    • Location:: Federal
    • Item Grade: OEM Standard
    • Substrate Material: Ceramic
    • Format: Pre-Catalytic Converter and Main Catalytic Converter
    • Exhaust Pipe Outlet Connection Type: Bolt On
    • Outlet Diameter (in): 2.25
    • Oxygen Sensor Location: Pre & Post Catalyst
    • Mount Type: Uses Factory Hangers
    • Housing Material: Stainless Steel
    • CARB Compliant: No
    • Exhaust Pipe Inlet Connection Type: Bolt On
    • Air Tube Adaptable: Not Air Tube Kit Adaptable

  • Sponsored
    Sponsored
    MagnaFlow OEM Grade Federal EPA Compliant Direct Fit Catalytic Converter 49703 for 2010 Toyota Tacoma
    • Part # 49703
    • SKU # 880818
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: OEM grade converter. Not for sale or use in the state of California.

    • PRICE: 1048.99
    • Location:: Federal
    • Universal Or Specific Fit: Specific
    • Oxygen Sensor Location: Post Converter
    • Inlet Gasket Included: Yes
    • Overall Length: 45.25in
    • Hangers Included: Yes
    • Inlet Type: Bolt-On
    • Air Tube Count: 0
    • Body Width: 4.25
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Tube Material: Stainless Steel
    • Outlet Inside Diameter: 2.5
    • Body Material: Stainless Steel
    • Inlet Mounting Hardware Included: No
    • Sensor Port Count: 4
    • Inlet Inside Diameter: 2.5
    • Body Length: 45.25
    • Outlet Mounting Hardware Included: No
    • Outlet Gasket Included: Yes
    • Clamps Included: No
    • Outlet Type: Bolt-On
    • Finish: Stainless Steel
    • Grade Type: Regular
    • Heat Shield Material: None

  • Sponsored
    Sponsored
    MagnaFlow HM Grade Federal EPA Compliant Manifold Catalytic Converter 50849 for 2010 Toyota Tacoma
    • Part # 50849
    • SKU # 108291
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: Manifold converter, Exhaust Manifold with Integrated Catalytic Converter HM Grade. Right. Not for sale or use in the state of California.

    • PRICE: 1139.99
    • Location:: Federal
    • Inlet Gasket Included: Yes
    • Converter Body Material: Stainless Steel
    • Overall Length: 23.5in
    • Converter Body Length: 6.5in
    • Inlet Type: Flanged
    • CARB Executive Order Number: No
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Type: One-Piece
    • Sensor Port Count: 1
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: Yes
    • Outlet Gasket Included: Yes
    • Clamps Included: No
    • Outlet Type: Flanged
    • Finish: Stainless Steel
    • Grade Type: Regular

  • Sponsored
    Sponsored
    MagnaFlow OEM Grade Federal EPA Compliant Manifold Catalytic Converter 49341 for 2010 Toyota Tacoma
    • Part # 49341
    • SKU # 253648
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: Manifold converter, OEM grade converter. Exhaust manifold with integrated catalytic converter. Left. Not for sale or use in the state of California.

    • PRICE: 1417.99
    • Location:: Federal
    • Inlet Gasket Included: Yes
    • Converter Body Material: Stainless Steel
    • Overall Length: 15.375in
    • Converter Body Length: 5.25in
    • Inlet Type: Flanged
    • CARB Executive Order Number: No
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Type: One-Piece
    • Sensor Port Count: 1
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: Yes
    • Outlet Gasket Included: Yes
    • Clamps Included: No
    • Outlet Type: Flanged
    • Finish: Stainless Steel
    • Grade Type: Regular

  • Sponsored
    Sponsored
    MagnaFlow OEM Grade Federal EPA Compliant Direct Fit Catalytic Converter 49701 for 2010 Toyota Tacoma
    • Part # 49701
    • SKU # 880781
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: OEM grade converter. Left. Not for sale or use in the state of California.

    • PRICE: 946.99
    • Location:: Federal
    • Universal Or Specific Fit: Specific
    • Oxygen Sensor Location: Pre Converter
    • Inlet Gasket Included: Yes
    • Overall Length: 39.125in
    • Hangers Included: Yes
    • Inlet Type: Bolt-On
    • Air Tube Count: 0
    • Body Width: 7.0
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Outlet Inside Diameter: 2.25
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 1
    • Inlet Inside Diameter: 2.25
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: Yes
    • Body Length: 44.0
    • Outlet Gasket Included: Yes
    • Clamps Included: Yes
    • Outlet Type: Bolt-On
    • Finish: Stainless Steel
    • Grade Type: Regular
    • Heat Shield Material: None

  • Sponsored
    Sponsored
    MagnaFlow HM Grade Federal EPA Compliant Manifold Catalytic Converter 50848 for 2010 Toyota Tacoma

    Application: OE Direct Fit - Factory mounting style

    Notes: Manifold converter, Exhaust Manifold with Integrated Catalytic Converter HM Grade. Left. Not for sale or use in the state of California.

    • PRICE: 1133.99
    • Location:: Federal
    • Inlet Gasket Included: Yes
    • Converter Body Material: Stainless Steel
    • Overall Length: 21.125in
    • Converter Body Length: 6.5in
    • Inlet Type: Flanged
    • CARB Executive Order Number: No
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Type: One-Piece
    • Sensor Port Count: 1
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: Yes
    • Outlet Gasket Included: Yes
    • Clamps Included: No
    • Outlet Type: Flanged
    • Finish: Stainless Steel
    • Grade Type: Regular

  • Sponsored
    Sponsored
    MagnaFlow OEM Grade Federal EPA Compliant Universal Catalytic Converter 2.5in 51206 for 2010 Toyota Tacoma
    • Part # 51206
    • SKU # 544775
    • Location: Federal

    Application: Universal - Requires cut and weld

    Notes: OEM grade converter. Cutting and welding required during installation. Not for sale or use in the state of California.

    • PRICE: 241.99
    • Location:: Federal
    • Outlet Quantity: 1
    • Hangers Included: No
    • Air Tube Count: 0
    • Inlet Type: Weld-On
    • Heat Shield Attached: Yes
    • Body Length: 9in
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Inlet Orientation: Straight
    • Inlet Quantity: 1
    • Finish: Stainless Steel
    • Heat Shield Material: Aluminized Steel
    • Universal Or Specific Fit: Universal
    • Body Shape: Round
    • Oxygen Sensor Location: None
    • Inlet Gasket Included: No
    • Overall Length: 13in
    • Body Width: 4.25in
    • Substrate Material: Ceramic
    • Tube Material: Stainless Steel
    • Outlet Inside Diameter: 2.5in
    • Body Material: Stainless Steel
    • Sensor Port Count: 0
    • Inlet Inside Diameter: 2.5in
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Height: 4.375in
    • Outlet Type: Weld-On
    • Outlet Orientation: Straight
    • Grade Type: Premium Replacement

  • Sponsored
    Sponsored
    MagnaFlow OEM Grade Federal EPA Compliant Manifold Catalytic Converter 49342 for 2010 Toyota Tacoma
    • Part # 49342
    • SKU # 253651
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: Manifold converter, OEM grade converter. Exhaust manifold with integrated catalytic converter. Right. Not for sale or use in the state of California.

    • PRICE: 1504.99
    • Location:: Federal
    • Inlet Gasket Included: Yes
    • Converter Body Material: Stainless Steel
    • Overall Length: 24in
    • Converter Body Length: 5.25in
    • Inlet Type: Flanged
    • CARB Executive Order Number: No
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Type: One-Piece
    • Sensor Port Count: 1
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: Yes
    • Outlet Gasket Included: Yes
    • Clamps Included: No
    • Outlet Type: Flanged
    • Finish: Stainless Steel
    • Grade Type: Regular

  • Sponsored
    Sponsored
    MagnaFlow OEM Grade Federal EPA Compliant Direct Fit Catalytic Converter 49702 for 2010 Toyota Tacoma
    • Part # 49702
    • SKU # 253771
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: OEM grade converter. Right. Not for sale or use in the state of California.

    • PRICE: 705.99
    • Location:: Federal
    • Universal Or Specific Fit: Specific
    • Oxygen Sensor Location: Pre Converter
    • Inlet Gasket Included: Yes
    • Overall Length: 23.5in
    • Hangers Included: No
    • Inlet Type: Bolt-On
    • Air Tube Count: 0
    • Body Width: 5.0
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Outlet Inside Diameter: 2.25
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Inlet Inside Diameter: 2.0
    • Sensor Port Count: 1
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Length: 23.5
    • Outlet Gasket Included: Yes
    • Clamps Included: No
    • Outlet Type: Bolt-On
    • Finish: Stainless Steel
    • Grade Type: Regular
    • Heat Shield Material: None

  • Sponsored
    Sponsored
    Dorman Direct Fit Exhaust Manifold with Integrated Federal Catalytic Converter 674-065 for 2010 Toyota Tacoma
    • Part # 674-065
    • SKU # 730845
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: Right, Exhaust Manifold with Integrated Catalytic Converter. Not legal for sale in California

    • PRICE: 831.99
    • Location:: Federal
    • Outlet Mounting Hole Quantity: 3
    • Inlet Gasket Included: Yes
    • Color: Natural
    • Converter Body Material: Stainless Steel
    • Outlet Quantity: 1
    • Overall Length: 28
    • Converter Body Length: 4
    • Air Tube Count: 0
    • CARB Executive Order Number: Not Carb Compliant
    • Inlet Mounting Hardware Included: No
    • Sensor Port Count: 2
    • Outlet Mounting Hardware Included: Yes
    • Inlet Mounting Hole Quantity: 6
    • Outlet Type: Flanged
    • Inlet Quantity: 1
    • Grade Type: Regular

  • Sponsored
    Sponsored
    Dorman Direct Fit Exhaust Manifold with Integrated Federal Catalytic Converter 674-064 for 2010 Toyota Tacoma
    • Part # 674-064
    • SKU # 730750
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: Left, Exhaust Manifold with Integrated Catalytic Converter. Not legal for sale in California

    • PRICE: 701.99
    • Location:: Federal
    • Outlet Mounting Hole Quantity: 3
    • Inlet Gasket Included: Yes
    • Color: Natural
    • Converter Body Material: Stainless Steel
    • Outlet Quantity: 1
    • Overall Length: 24
    • Converter Body Length: 4
    • Air Tube Count: 0
    • CARB Executive Order Number: Not Carb Compliant
    • Inlet Mounting Hardware Included: No
    • Sensor Port Count: 2
    • Outlet Mounting Hardware Included: Yes
    • Inlet Mounting Hole Quantity: 6
    • Outlet Type: Flanged
    • Inlet Quantity: 1
    • Grade Type: Regular

About


2010 Toyota Tacoma Catalytic Converter

2010 Toyota Tacoma catalytic converters are responsible for removing poisonous fumes and gases that cause smog and acid rain from exhaust before it leaves the vehicle. Symptoms of a bad one include decreased fuel economy and a drain on performance, particularly while accelerating. In some states a functioning one is required for registered vehicle usage. Find a direct replacement 2010 Tacoma catalytic converter replacement online or your neighborhood AutoZone.