2004 Ford Focus Engine Control Computer

Buy Online. Pick Up In-Store.

SET YOUR VEHICLE
Get an exact fit for your 2004 Ford Focus

1-8 of 8 Results

Sort by
1-8 of 8 Results
Cardone Remanufactured Engine Control Computer 78-9165F for 2004 Ford Focus
$
505
99
  • Part # 78-9165F
  • SKU # 1149741

Notes: With Module #PBO-250; Flash Programming included in Price; Flash Units require programming specific to the vehicle prior to shipping; Accurate VIN and mileage are required; Delivered units are ready for installation with no further programming required; Customer-specific parameters such as courtesy light timing, etc may need to be reset after ECM is re-installed; Correct VIN and OEM Number Required When Ordering

  • PRICE: 505.99

Cardone Remanufactured Engine Control Computer 78-9166F for 2004 Ford Focus
$
505
99
  • Part # 78-9166F
  • SKU # 1149709

Notes: With Module #PBO-251; Flash Programming included in Price; Flash Units require programming specific to the vehicle prior to shipping; Accurate VIN and mileage are required; Delivered units are ready for installation with no further programming required; Customer-specific parameters such as courtesy light timing, etc may need to be reset after ECM is re-installed; Correct VIN and OEM Number Required When Ordering

  • PRICE: 505.99

Cardone Reman Engine Control Computer 78-8542F for 2004 Ford Focus
$
328
99
  • Part # 78-8542F
  • SKU # 471037

Notes: All calibrations with module ID #LP2-324; Correct VIN and OEM number required when ordering; PATS module requires programming after ECM install. Flash units require programming specific to the vehicle prior to shipping. Accurate VIN and mileage are required. Additional vehicle specific on-car programming must be performed AFTER installation to prevent drivability and starting issues.

  • PRICE: 328.99
  • Product Condition: Remanufactured
  • Module Housing Material: Metal
  • Connector / Terminal Configuration: Pin/Male

Cardone Reman Engine Control Computer 78-8536F for 2004 Ford Focus
$
364
99
  • Part # 78-8536F
  • SKU # 466417

Notes: All calibrations with module ID #LBO-210; Correct VIN and OEM number required when ordering; PATS module requires programming after ECM install. Flash units require programming specific to the vehicle prior to shipping. Accurate VIN and mileage are required. Additional vehicle specific on-car programming must be performed AFTER installation to prevent drivability and starting issues.

  • PRICE: 364.99
  • Product Condition: Remanufactured
  • Module Housing Material: Metal
  • Connector / Terminal Configuration: Pin/Male

Cardone Reman Engine Control Computer 78-8541F for 2004 Ford Focus
$
343
99
  • Part # 78-8541F
  • SKU # 470740

Notes: All calibrations with module ID #LP2-323; Correct VIN and OEM number required when ordering; PATS module requires programming after ECM install. Flash units require programming specific to the vehicle prior to shipping. Accurate VIN and mileage are required. Additional vehicle specific on-car programming must be performed AFTER installation to prevent drivability and starting issues.

  • PRICE: 343.99
  • Product Condition: Remanufactured
  • Module Housing Material: Metal
  • Connector / Terminal Configuration: Pin/Male

Cardone Reman Engine Control Computer 78-9164F for 2004 Ford Focus
$
273
99
  • Part # 78-9164F
  • SKU # 94752

Notes: All calibrations with module ID #PBO-241; Correct VIN and OEM number required when ordering; PATS module requires programming after ECM install. Flash units require programming specific to the vehicle prior to shipping. Accurate VIN and mileage are required. Additional vehicle specific on-car programming must be performed AFTER installation to prevent drivability and starting issues.

  • PRICE: 273.99
  • Product Condition: Remanufactured
  • Module Housing Material: Metal
  • Connector / Terminal Configuration: Pin/Male; Pin/Male; Pin/Male

Cardone Reman Engine Control Computer 78-9163F for 2004 Ford Focus
$
273
99
  • Part # 78-9163F
  • SKU # 94751

Notes: All calibrations with module ID #PBO-240; Correct VIN and OEM number required when ordering; PATS module requires programming after ECM install. Flash units require programming specific to the vehicle prior to shipping. Accurate VIN and mileage are required. Additional vehicle specific on-car programming must be performed AFTER installation to prevent drivability and starting issues.

  • PRICE: 273.99
  • Product Condition: Remanufactured
  • Module Housing Material: Metal
  • Connector / Terminal Configuration: Pin/Male; Pin/Male; Pin/Male