2004 Jeep Grand Cherokee Oil Pan

Buy Online. Pick Up In-Store.

SET YOUR VEHICLE
Get an exact fit for your 2004 Jeep Grand Cherokee

1-5 of 5 Results

Sort by
1-5 of 5 Results
Spectra Premium Oil Pan CRP06C for 2004 Jeep Grand Cherokee
$
79
99
  • Part # CRP06C
  • SKU # 220526

Notes: Gasket not included

  • PRICE: 79.99
  • Dipstick Port: No
  • Baffled: No
  • Drain Thread Size: M14 X 1.5
  • Capacity: 6.0
  • Sump Location: Rear
  • Pickup Included: No
  • Gasket Or Seal Included: No
  • Material: Cold Rolled Steel (EDDQ)
  • Windage Tray Included: No
  • Crank Shaft Wiper Included: No
  • Sump Type: Wet

Spectra Premium Oil Pan CRP31A for 2004 Jeep Grand Cherokee
$
84
99
  • Part # CRP31A
  • SKU # 319423

Notes: Gasket not included

  • PRICE: 84.99
  • Dipstick Port: No
  • Baffled: No
  • Drain Thread Size: M14 X 1.5
  • Capacity: 6.0
  • Sump Location: Rear
  • Pickup Included: No
  • Gasket Or Seal Included: No
  • Material: Cold Rolled Steel (EDDQ)
  • Windage Tray Included: No
  • Crank Shaft Wiper Included: No
  • Sump Type: Wet

Pioneer Oil Pan 501331 for 2004 Jeep Grand Cherokee
$
99
99
  • Part # 501331
  • SKU # 334406

Notes: Gasket not included

  • PRICE: 99.99

Pioneer Oil Pan 501201 for 2004 Jeep Grand Cherokee
$
84
99
  • Part # 501201
  • SKU # 217700

Notes: Gasket not included. With sensor hole

  • PRICE: 84.99

Dorman Oil Pan 264-239 for 2004 Jeep Grand Cherokee
$
89
99
  • Part # 264-239
  • SKU # 410007

Notes: Gasket not included

  • PRICE: 89.99
  • Dipstick Port: No
  • Baffled: No
  • Drain Thread Size: M14X1.5
  • Sump Location: Rear
  • Pickup Included: No
  • Capacity: 6
  • Gasket Or Seal Included: No
  • Material: Steel
  • Windage Tray Included: No
  • Crank Shaft Wiper Included: No
  • Sump Type: Wet

Customer

Reviews

Reviews for


Fit perfectly, no issues

JK

in 9 months

Fit and quality is similar to the original I replaced the RMS while doing it, which i offset. Check forums and you tube for how to. Only complaint is the drain plug didn't come with a gasket so I picked up another one at AZ that did. Used Fel Pro gaskets, Loc Tite 518 for bearing cap (if doing RMS) and Permatex Right Stuff 90 min at recommended critical areas( for pan gasket install). Be sure to keep track of bolt locations (there are many) and torque to spec. On mine bearing cap was 80 ft lb, brace 35 ft lb and pan bolts 12 ft lb/144 in lbs.

What kind of vehicle do you drive? 2004 Jeep Grand Cherokee 4.0

Fit and quality is similar to the original I replaced the RMS while doing it, which i offset. Check forums and you tube for how to. Only complaint is the drain plug didn't come with a gasket so I picked up another one at AZ that did. Used Fel Pro gaskets, Loc Tite 518 for bearing cap (if doing RMS) and Permatex Right Stuff 90 min at recommended critical areas( for pan gasket install). Be sure to keep track of bolt locations (there are many) and torque to spec. On mine bearing cap was 80 ft lb, brace 35 ft lb and pan bolts 12 ft lb/144 in lbs.

What kind of vehicle do you drive? 2004 Jeep Grand Cherokee 4.0