Delphi Ignition Coil GN10123
Delphi Ignition Coil GN10123
Delphi Ignition Coil GN10123
Delphi Ignition Coil GN10123
Delphi Ignition Coil GN10123
Delphi Ignition Coil GN10123

Delphi Ignition Coil GN10123

Delphi812608
Part # GN10123
SKU # 812608
Price Not Available

PRODUCT SPECIFICATIONS

Part #GN10123
SKU #812608
Weight1.28lbs
Warranty
Item GradeOEM Standard
Coil ConfigurationDIS (Distributorless Ignition System)
Vehicle System Voltage12V
Coil Terminal Type2 spade connector receptacles
Coil Wire Terminal Attachment Type2 female spark plug cables and boot
Part #
GN10123
SKU #
812608
Weight
1.28lbs
Warranty
Item Grade
OEM Standard
Coil Configuration
DIS (Distributorless Ignition System)
Vehicle System Voltage
12V
Coil Terminal Type
2 spade connector receptacles
Coil Wire Terminal Attachment Type
2 female spark plug cables and boot

PRODUCT DESCRIPTION

100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part.

  • checkmark
    Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • checkmark
    Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • checkmark
    Delphi ignition coils are engineered to OE specifications and built with the benefit of more than 100 years of Delphi's OE Heritage; our coils are designed and endurance tested to resist the common stresses that cause failure
  • checkmark
    We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
  • checkmark
    Epoxy vacuum techniques reduce air bubbles in the epoxy; having fewer air bubbles increases the epoxy insulation quality and reduces the chances of energy punch-through failures.