Delphi Ignition Coil GN10242

Delphi Ignition Coil GN10242

Delphi849869
Part # GN10242
SKU # 849869

Price Not Available

PRODUCT SPECIFICATIONS

Part #GN10242
SKU #849869
Weight0.53lbs
Warranty
Item GradeOEM Standard
Coil ConfigurationCOP (Coil On Plug Ignition)
Vehicle System Voltage12V
Coil Terminal Type3 Pins, flat male blades
Coil Wire Terminal Attachment TypeFemale, direct spark plug connection
Minimum Primary Resistance RangeNot accessible due to driver electronics
Minimum Secondary Resistance RangeNot accessible due to blocking diode
Part #
GN10242
SKU #
849869
Weight
0.53lbs
Warranty
Item Grade
OEM Standard
Coil Configuration
COP (Coil On Plug Ignition)
Vehicle System Voltage
12V
Coil Terminal Type
3 Pins, flat male blades
Coil Wire Terminal Attachment Type
Female, direct spark plug connection
Minimum Primary Resistance Range
Not accessible due to driver electronics

PRODUCT DESCRIPTION

100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part.

  • checkmark
    Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • checkmark
    Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • checkmark
    Delphi ignition coils are engineered to OE specifications and built with the benefit of more than 100 years of Delphi's OE Heritage; our coils are designed and endurance tested to resist the common stresses that cause failure
  • checkmark
    We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
  • checkmark
    Epoxy vacuum techniques reduce air bubbles in the epoxy; having fewer air bubbles increases the epoxy insulation quality and reduces the chances of energy punch-through failures.