This is a test
$
63
99
Application: With high altitude emission, Over 8,500 lb GVW
$
59
99
Application: SE, LX, EX or DX model
Notes: ATTENTION: Click on Bulletin(s) for testing instructions. It is best to test your old parts first. A Wells test sheet bulletin is available for this part. Test sheets work with GENIII testers only. See attached bulletin to identify your tester.
$
31
49
Notes: Bosch equipped, Cap has Hold-down Clips. ATTENTION: Click on Bulletin(s) for testing instructions. It is best to test your old parts first. A Wells test sheet bulletin is available for this part.
$
764
99
Application: With module outside cap
$
44
99
Notes: ATTENTION: Click on Bulletin(s) for testing instructions. It is best to test your old parts first. Wells Test sheets are available for most ignition modules. A misfire condition can destroy the ignition module. If the engine is or has been misfiring, do not install the new ignition module until after the source of the misfire has been corrected. Check the secondary ignition circuit; Plugs, Plug Wires, Coil(s), Distributor Cap and Rotor. Also check for any camshaft position sensor trouble codes.
$
74
99
Notes: New Part Design with bracket and jumper harness. Replaces original one piece design
$
79
99
$
238
99
Application: To Engine #SA955971
$
109
99
Notes: ATTENTION: Click on Bulletin(s) for testing instructions. It is best to test your old parts first. Wells Test sheets are available for most ignition modules. A misfire condition can destroy the ignition module. If the engine is or has been misfiring, do not install the new ignition module until after the source of the misfire has been corrected. Check the secondary ignition circuit; Plugs, Plug Wires, Coil(s), Distributor Cap and Rotor. Also check for any camshaft position sensor trouble codes.
