MSD Distributor less Tachometer Driver

MSD438279
Part # 8913
SKU # 438279

Price Not Available

PRODUCT SPECIFICATIONS

Part #8913
SKU #438279
Weight0.6lbs
Module Housing MaterialHigh quality plastic
Connector / Terminal ConfigurationBullet and butt connectors
Part #
8913
SKU #
438279
Weight
0.6lbs
Module Housing Material
High quality plastic
Connector / Terminal Configuration
Bullet and butt connectors

PRODUCT DESCRIPTION

Ever wonder how you can install an aftermarket tachometer on a vehicle with no distributor and multiple coil packs? MSD has the answer with the distributorless tach driver! The compact tach driver measures only 1.5 In. x 3.5 In. x 2 In. and is potted with a polyurethane compound for vibration and water protection so it can easily be mounted under the hood. It wires inline on the coils’ 12 Volt supply wire where it senses the current going through this wire and converts this information into a 12 Volt output signal that most aftermarket tachometers use as a trigger signal. It can be used on 4, 6 or 8-cylinder engines.

  • checkmark
    Assists tach output on distributorless systems
  • checkmark
    Can drive other RPM controlled devices
  • checkmark
    Compact housing
  • checkmark
    Easy to mount

Ever wonder how you can install an aftermarket tachometer on a vehicle with no distributor and multiple coil packs? MSD has the answer with the distributorless tach driver! The compact tach driver measures only 1.5 In. x 3.5 In. x 2 In. and is potted with a polyurethane compound for vibration and water protection so it can easily be mounted under the hood. It wires inline on the coils’ 12 Volt supply wire where it senses the current going through this wire and converts this information into a 12 Volt output signal that most aftermarket tachometers use as a trigger signal. It can be used on 4, 6 or 8-cylinder engines.

  • checkmark
    Assists tach output on distributorless systems
  • checkmark
    Can drive other RPM controlled devices
  • checkmark
    Compact housing
  • checkmark
    Easy to mount