K&N High Performance Air Intake System 57-2510-1
  • Thumbnail  K&N High Performance Air Intake System 57-2510-1
  • Thumbnail  K&N High Performance Air Intake System 57-2510-1

K&N High Performance Air Intake System 57-2510-1

K&N High Performance
296220
Part # 57-2510-1
SKU # 296220
Notes: ***50 state legal*** California Air Resources Board Executive Order: D-269-12; Filter Element Color: Red. With mass air sensor. 57 Series- Clamp-on with adapter brackets.

$19599

PRODUCT SPECIFICATIONS

Part #57-2510-1
SKU #296220
Weight5.12lbs
Notes***50 state legal*** California Air Resources Board Executive Order: D-269-12; Filter Element Color: Red. With mass air sensor. 57 Series- Clamp-on with adapter brackets.
Coupler Color / FinishNot Applicable
Clamp TypeRegular
Coupler MaterialNot Required
Mass Air Flow Sensor Adapter IncludedIncluded When Required
Mounting Hardware IncludedYes
Clamp Quantity Included1
Air Filter Element ColorRed
Air Filter Oil IncludedAir Filter Pre-Oiled
Air Filter Small End Diameter (in)7
Air Filter Element WashableYes
Air Filter Outlet ShapeNot Flanged
Coupler Quantity Included0
Clamp MaterialStainless Steel
Air Filter Heat Shield IncludedNo
Air Filter Outlet Length (in)6
Air Filter Outlet Width (in)6
Air Filter Element MaterialCotton Gauze
Air Filter End Cap Color / FinishChrome
Air Filter Large End Diameter (in)7.5
Clamp Color / FinishNatural
Air Box IncludedNo
Vacuum Tubing IncludedNo
Air Filter Overall Height (in)8

PRODUCT DESCRIPTION

The K&N 57-2510-1 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Ford Bronco and F-Series pickup models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 57-2510-1 air intake comes with a gigantic chrome topped K&N high-flow air filter that installs into the previous air box space. Air is directed through the air filter and into the engine's factory intake tube for a guaranteed power gain. The air intake assembly accommodates the factory mass air sensor and air temperature sensor. The oversized cylinder shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points requiring commonly available tools to do the job. K&N 57 Series FIPK's are street legal in all 50 US states

  • checkmarkGuaranteed to increase horsepower
  • checkmarkDesigned to improve throttle response and engine sound
  • checkmarkLasts up to 100,000 miles before service is required (depending on driving conditions)
  • checkmarkWashable and reusable lifetime air filter
  • checkmarkEasy to install, usually in 90 minutes or less

RELATED PRODUCTS