K&N High Performance Air Intake System 57-3066
  • Thumbnail  K&N High Performance Air Intake System 57-3066
  • Thumbnail  K&N High Performance Air Intake System 57-3066
  • Thumbnail  K&N High Performance Air Intake System 57-3066

K&N High Performance Air Intake System 57-3066

K&N High Performance
937492
Part # 57-3066
SKU # 937492

$34699

PRODUCT SPECIFICATIONS

Part #57-3066
SKU #937492
Weight14.8lbs
Coupler Color / FinishBlack
Clamp TypeRegular
Coupler MaterialSilicone Rubber
Air Filter Element ColorRed
Air Filter Oil IncludedAir Filter Pre-Oiled
Air Filter Small End Diameter (in)6.63
Air Filter Element WashableYes
Air Filter Outlet ShapeCircular
Coupler Quantity Included1
Air Filter Heat Shield IncludedYes
Intake Pipe Inlet Length (in)6
Air Filter End Cap Color / FinishBlack Powder Coated
Air Filter Large End Diameter (in)9
Intake Pipe Inlet Width (in)6
Intake Pipe MaterialHigh-Density Polyethylene
Intake Pipe PortsIncluded
Intake Pipe Color / FinishBlack
Air Filter Heat Shield Color / FinishTextured Black
Mass Air Flow Sensor Adapter IncludedIncluded When Required
Mounting Hardware IncludedYes
Clamp Quantity Included3
Air Filter Heat Shield MaterialMild Steel
Clamp MaterialStainless Steel
Intake Pipe Inlet ShapeCircular
Air Filter Outlet Length (in)6
Air Filter Outlet Width (in)6
Air Filter Element MaterialCotton Gauze
Clamp Color / FinishNatural
Air Box IncludedNo
Vacuum Tubing IncludedNo
Air Filter Overall Height (in)7.5

PRODUCT DESCRIPTION

The K&N 57-3066 FIPK air intake system replaces your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 57-3066 air intake comes with a K&N high-flow air filter and a covered heat shield that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor and the air filter restriction gage. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using the existing factory mounting points. The tools needed are a screwdriver, ratchet set and several wrenches. K&N 57 Series FIPK's are street legal in all 50 US states

  • checkmarkGuaranteed to increase horsepower
  • checkmarkDesigned to improve throttle response and engine sound
  • checkmarkLasts up to 100,000 miles before service is required (depending on driving conditions)
  • checkmarkReplaces entire factory air intake system
  • checkmarkFree-flowing high density polyethylene tube
  • checkmarkEasy to install, usually in 90 minutes or less

RELATED PRODUCTS