K&N High Performance Air Intake System 57-9019
  • Thumbnail  K&N High Performance Air Intake System 57-9019
  • Thumbnail  K&N High Performance Air Intake System 57-9019

K&N High Performance Air Intake System 57-9019

K&N High Performance
539253
Part # 57-9019
SKU # 539253
Notes: ***50 state legal*** California Air Resources Board Executive Order: D-269-28. Filter Element Color: Red. Intake Tube/Pipe Color: Black.

$33899

PRODUCT SPECIFICATIONS

Part #57-9019
SKU #539253
Weight10lbs
Notes***50 state legal*** California Air Resources Board Executive Order: D-269-28. Filter Element Color: Red. Intake Tube/Pipe Color: Black.
Coupler Color / FinishBlack
Clamp TypeRegular
Coupler Material80 Durometer EPDM
Air Filter Element ColorRed
Air Filter Oil IncludedAir Filter Pre-Oiled
Air Filter Small End Diameter (in)4
Air Filter Element WashableYes
Air Filter Outlet ShapeCircular
Coupler Quantity Included3
Air Filter Heat Shield IncludedYes
Intake Pipe Inlet Length (in)3
Air Filter End Cap Color / FinishChrome
Air Filter Large End Diameter (in)6
Vacuum Tubing MaterialSilicone
Intake Pipe Inlet Width (in)3
Intake Pipe MaterialHigh-Density Polyethylene
Intake Pipe PortsIncluded
Vacuum Tubing Color / FinishBlack
Intake Pipe Color / FinishBlack
Air Filter Heat Shield Color / FinishTextured Black
Mass Air Flow Sensor Adapter IncludedIncluded When Required
Mounting Hardware IncludedYes
Clamp Quantity Included4
Air Filter Heat Shield MaterialMild Steel
Clamp MaterialStainless Steel
Intake Pipe Inlet ShapeCircular
Air Filter Outlet Length (in)3
Air Filter Outlet Width (in)3
Air Filter Element MaterialCotton Gauze
Clamp Color / FinishNatural
Air Box IncludedNo
Vacuum Tubing IncludedYes
Air Filter Overall Height (in)6.75

PRODUCT DESCRIPTION

The K&N 57-9019 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Toyota Tundra 3.4L V6 models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 57-9019 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, side cutters, ratchet set and several wrenches. K&N 57 Series FIPK's are street legal in all 50 US states

  • checkmarkGuaranteed to increase horsepower
  • checkmarkDesigned to improve throttle response and engine sound
  • checkmarkLasts up to 100,000 miles before service is required (depending on driving conditions)
  • checkmarkEasy to install, usually in 90 minutes or less
  • checkmarkFree-flowing high density polyethylene tube
  • checkmarkReplaces entire factory air intake system

RELATED PRODUCTS