K&N High Performance Air Intake System 69-1018TS
  • Thumbnail  K&N High Performance Air Intake System 69-1018TS
  • Thumbnail  K&N High Performance Air Intake System 69-1018TS
  • Thumbnail  K&N High Performance Air Intake System 69-1018TS

K&N High Performance Air Intake System 69-1018TS

K&N High Performance
Part # 69-1018TS
SKU # 344476



Part #69-1018TS
SKU #344476
Coupler Color / FinishBlack
Clamp TypeRegular
Intake Pipe Outlet Length (in)10.5
Coupler MaterialSilicone Rubber
Air Filter Element ColorRed
Air Filter Oil IncludedAir Filter Pre-Oiled
Air Filter Element WashableYes
Air Filter Outlet ShapeCircular
Coupler Quantity Included1
Air Filter Heat Shield IncludedYes
Intake Pipe Inlet Length (in)10.5
Air Filter End Cap Color / FinishBlack
Intake Pipe Inlet Width (in)2.5
Intake Pipe MaterialAluminum
Intake Pipe PortsIncluded
Intake Pipe Outlet Width (in)2.25
Intake Pipe Color / FinishSilver
Air Filter Heat Shield Color / FinishTextured Black
Mass Air Flow Sensor Adapter IncludedIncluded When Required
Mounting Hardware IncludedYes
Clamp Quantity Included5
Air Filter Heat Shield MaterialMild Steel
Clamp MaterialStainless Steel
Intake Pipe Inlet ShapeCircular
Air Filter Outlet Length (in)2
Air Filter Outlet Width (in)2.5
Air Filter Element MaterialCotton Gauze
Intake Pipe Outlet ShapeCircular
Clamp Color / FinishNatural
Air Box IncludedNo
Vacuum Tubing IncludedYes
Air Filter Overall Height (in)5.5


The K&N 69-1018TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda CR-Z models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1018TS air intake comes with a K&N XStream Top air filter designed for higher air flow and durability. A heat shield installs into the previous air box space that directs air through an intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor and a replacement silicone crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, pliers, a ratchet set and some wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

  • checkmarkGuaranteed to increase horsepower
  • checkmarkDesigned to improve throttle response and engine sound
  • checkmarkLow restriction aluminum tube
  • checkmarkEasy to install, usually in 90 minutes or less
  • checkmarkFilter lasts up to 100,000 miles before service is required
  • checkmarkReplaces stock air intake system