K&N High Performance Air Intake System 69-2542TS
  • Thumbnail  K&N High Performance Air Intake System 69-2542TS
  • Thumbnail  K&N High Performance Air Intake System 69-2542TS
  • Thumbnail  K&N High Performance Air Intake System 69-2542TS

K&N High Performance Air Intake System 69-2542TS

K&N High Performance



Part #69-2542TS
Coupler Color / FinishBlack
Clamp TypeRegular
Intake Pipe Outlet Length (in)11
Coupler MaterialSilicone Rubber
Air Filter Element ColorRed
Air Filter Oil IncludedAir Filter Pre-Oiled
Air Filter Small End Diameter (in)5
Air Filter Element WashableYes
Air Filter Outlet ShapeCircular
Coupler Quantity Included2
Air Filter Heat Shield IncludedYes
Intake Pipe Inlet Length (in)11
Air Filter End Cap Color / FinishBlack
Air Filter Large End Diameter (in)6
Intake Pipe Inlet Width (in)2.5
Intake Pipe MaterialAluminum
Intake Pipe PortsIncluded
Intake Pipe Outlet Width (in)2.5
Intake Pipe Color / FinishSilver
Air Filter Heat Shield Color / FinishTextured Black
Mass Air Flow Sensor Adapter IncludedIncluded When Required
Mounting Hardware IncludedYes
Clamp Quantity Included6
Air Filter Heat Shield MaterialMild Steel
Clamp MaterialStainless Steel
Intake Pipe Inlet ShapeCircular
Air Filter Outlet Length (in)2.5
Air Filter Outlet Width (in)2.5
Air Filter Element MaterialCotton Gauze
Intake Pipe Outlet ShapeCircular
Clamp Color / FinishNatural
Air Box IncludedNo
Vacuum Tubing IncludedNo
Air Filter Overall Height (in)6.5


The K&N 69-2542TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Dodge Avenger models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-2542TS air intake comes with a black rubber topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory inlet air temperature sensor, crank case vent hose and air injection hose on certain vehicles. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, pliers, ratchet set and some wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

  • checkmarkGuaranteed to increase horsepower
  • checkmarkDesigned to improve throttle response and engine sound
  • checkmarkLow restriction aluminum tube
  • checkmarkEasy to install, usually in 90 minutes or less
  • checkmarkFilter lasts up to 100,000 miles before service is required
  • checkmarkReplaces stock air intake system