Edelbrock Performance Camshaft Kit 7102
  • Thumbnail  Edelbrock Performance Camshaft Kit 7102
  • Thumbnail  Edelbrock Performance Camshaft Kit 7102
Pinch with 2 fingers to zoom

Edelbrock Performance Camshaft Kit 7102

Edelbrock10714
Part # 7102
SKU # 10714

Price Not Available

PRODUCT SPECIFICATIONS

Part #7102
SKU #10714
Weight13.14lbs
Exh Duration at 050 inch Degree244
Intake Valve Lift0.488
RPM Range1000-7000
Advertised Exhaust Duration318
Lifter TypeHydraulic Flat Tappet
Advertised Intake Duration308
Exhaust Valve Lift0.51
Part #
7102
SKU #
10714
Weight
13.14lbs
Exh Duration at 050 inch Degree
244
Intake Valve Lift
0.488
RPM Range
1000-7000
Advertised Exhaust Duration
318
Lifter Type
Hydraulic Flat Tappet
Advertised Intake Duration
308

PRODUCT DESCRIPTION

Edelbrock Part # 7102 Performer RPM Camshaft is designed for 1957-1986 small-block Chevy 283-400 V-8 applications. This Edelbrock cam kit produced 410 HP & 408 ft-lbs. of torque when used with #7501 intake and #60899 cylinder heads on a 350 engine. The camshaft works well with high-performance street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.\n\nCamshaft Specifications:\n? Duration @ .050 Intake: 234 degrees \n? Duration @ .050 Exhaust: 244 degrees\n? Lift @ Valve Intake: .488?\n? Lift @ Valve Exhaust: .510?\n? Lobe Separation: 112 Degrees\n? Intake Centerline: 107 Degrees\n? Idle Vacuum @ 1000 RPM?s: 11?

    Edelbrock Part # 7102 Performer RPM Camshaft is designed for 1957-1986 small-block Chevy 283-400 V-8 applications. This Edelbrock cam kit produced 410 HP & 408 ft-lbs. of torque when used with #7501 intake and #60899 cylinder heads on a 350 engine. The camshaft works well with high-performance street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.\n\nCamshaft Specifications:\n? Duration @ .050 Intake: 234 degrees \n? Duration @ .050 Exhaust: 244 degrees\n? Lift @ Valve Intake: .488?\n? Lift @ Valve Exhaust: .510?\n? Lobe Separation: 112 Degrees\n? Intake Centerline: 107 Degrees\n? Idle Vacuum @ 1000 RPM?s: 11?