Edelbrock Performance Camshaft Kit 7168
  • Thumbnail  Edelbrock Performance Camshaft Kit 7168
  • Thumbnail  Edelbrock Performance Camshaft Kit 7168
Pinch with 2 fingers to zoom

Edelbrock Performance Camshaft Kit 7168

Edelbrock
366241
Part # 7168
SKU # 366241

$31299

PRODUCT SPECIFICATIONS

Part #7168
SKU #366241
Weight9.7lbs
Exh Duration at 050 inch Degree244
Intake Valve Lift0.562
RPM Range1000-7000
Advertised Exhaust Duration334
Lifter TypeHydraulic Flat Tappet
Advertised Intake Duration312
Exhaust Valve Lift0.588
Part #
7168
SKU #
366241
Weight
9.7lbs
Exh Duration at 050 inch Degree
244
Intake Valve Lift
0.562
RPM Range
1000-7000
Advertised Exhaust Duration
334
Lifter Type
Hydraulic Flat Tappet
Advertised Intake Duration
312

PRODUCT DESCRIPTION

Edelbrock Part # 7168 Performer RPM Camshaft is designed for small-block Ford 351C V-8 applications. This Edelbrock cam kit produced 465 HP & 445Ft-lbs. of torque when used with #7564 intake and #61629 cylinder heads on a 351C. engine. The camshaft works well with high-performance street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.\n\nCamshaft Specifications:\n? Duration @ .050 Intake: 234 degrees \n? Duration @ .050 Exhaust: 244 degrees\n? Lift @ Valve Intake: .562?\n? Lift @ Valve Exhaust: .588?\n? Lobe Separation: 112 Degrees\n? Intake Centerline: 107 Degrees

  • checkmarkCast Cam Type
  • checkmarkHydraulic Lifter Type
  • checkmarkExhaust 244 deg/Intake 234 deg Duration @ .050 Lift
  • checkmarkExhaust 0.562in./Intake 0.562in. Valve Lift
  • checkmark112 deg Lobe Steps

Edelbrock Part # 7168 Performer RPM Camshaft is designed for small-block Ford 351C V-8 applications. This Edelbrock cam kit produced 465 HP & 445Ft-lbs. of torque when used with #7564 intake and #61629 cylinder heads on a 351C. engine. The camshaft works well with high-performance street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.\n\nCamshaft Specifications:\n? Duration @ .050 Intake: 234 degrees \n? Duration @ .050 Exhaust: 244 degrees\n? Lift @ Valve Intake: .562?\n? Lift @ Valve Exhaust: .588?\n? Lobe Separation: 112 Degrees\n? Intake Centerline: 107 Degrees

  • checkmarkCast Cam Type
  • checkmarkHydraulic Lifter Type
  • checkmarkExhaust 244 deg/Intake 234 deg Duration @ .050 Lift
  • checkmarkExhaust 0.562in./Intake 0.562in. Valve Lift
  • checkmark112 deg Lobe Steps

RELATED PRODUCTS