Edelbrock Performance Camshaft 2281

Edelbrock952904
Part # 2281
SKU # 952904

Price Not Available

PRODUCT SPECIFICATIONS

Part #2281
SKU #952904
Weight10.5lbs
Exh Duration at 050 inch Degree238
Intake Valve Lift0.573
RPM Range1500-6500
Advertised Exhaust Duration302
Lifter TypeHydraulic Roller
Int Duration at 050 inch Degree235
Advertised Intake Duration299
Exhaust Valve Lift0.582
Part #
2281
SKU #
952904
Weight
10.5lbs
Exh Duration at 050 inch Degree
238
Intake Valve Lift
0.573
RPM Range
1500-6500
Advertised Exhaust Duration
302
Lifter Type
Hydraulic Roller
Int Duration at 050 inch Degree
235

PRODUCT DESCRIPTION

Edelbrock Rollin? Thunder Camshaft # 2281 is designed for 351W Ford V8 engines and produce optimum torque from the low-end to the mid-range. Rollin? Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 449HP and 413 Ft Lbs of Torque when paired with RPM Air-Gap Dual Quad intake manifold # 75354 and Performer RPM cylinder heads # 60255. Must use a high stall torque converter. Will not work with stock valve springs.\n\nCamshaft specifications:\n\n? Intake duration: 235 Degrees\n? Exhaust duration: 238 Degrees\n? Intake lift: .573?\n? Exhaust lift: .582?\n? Lobe separation: 112 Degree\n? Intake Center Line: 107\n? Vacuum: 10?

  • checkmark
    Roller Cam Type
  • checkmark
    Roller Lifter Type
  • checkmark
    Exhaust 238 deg/Intake 238 deg Duration @ .050 Lift
  • checkmark
    Exhaust 0.364in./Intake 0.364in. Valve Lift
  • checkmark
    112 deg Lobe Steps

Edelbrock Rollin? Thunder Camshaft # 2281 is designed for 351W Ford V8 engines and produce optimum torque from the low-end to the mid-range. Rollin? Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 449HP and 413 Ft Lbs of Torque when paired with RPM Air-Gap Dual Quad intake manifold # 75354 and Performer RPM cylinder heads # 60255. Must use a high stall torque converter. Will not work with stock valve springs.\n\nCamshaft specifications:\n\n? Intake duration: 235 Degrees\n? Exhaust duration: 238 Degrees\n? Intake lift: .573?\n? Exhaust lift: .582?\n? Lobe separation: 112 Degree\n? Intake Center Line: 107\n? Vacuum: 10?

  • checkmark
    Roller Cam Type
  • checkmark
    Roller Lifter Type
  • checkmark
    Exhaust 238 deg/Intake 238 deg Duration @ .050 Lift
  • checkmark
    Exhaust 0.364in./Intake 0.364in. Valve Lift
  • checkmark
    112 deg Lobe Steps