Pennzoil Platinum Engine Oil High Mileage Full Synthetic 0W-20 1 Quart
  • Thumbnail  Pennzoil Platinum Engine Oil High Mileage Full Synthetic 0W-20 1 Quart
  • Thumbnail  Pennzoil Platinum Engine Oil High Mileage Full Synthetic 0W-20 1 Quart
  • Thumbnail  Pennzoil Platinum Engine Oil High Mileage Full Synthetic 0W-20 1 Quart
Pinch with 2 fingers to zoom

Pennzoil Platinum Engine Oil High Mileage Full Synthetic 0W-20 1 Quart

Pennzoil64920
Part # 550046634
SKU # 64920

Price Not Available

PRODUCT SPECIFICATIONS

Part #550046634
SKU #64920
Weight2.02lbs
Location:Engine Oil
Container Size1qt
Oil ClassHigh Mileage
SAE Oil Weight0W-20
Oil CompositionFull Synthetic
Cycle4
Part #
550046634
SKU #
64920
Weight
2.02lbs
Location:
Engine Oil
Container Size
1qt
Oil Class
High Mileage
SAE Oil Weight
0W-20
Oil Composition
Full Synthetic
Cycle
4

PRODUCT DESCRIPTION

Pennzoil Platinum High Mileage SAE 0W-20 is a full synthetic motor oil made from natural gas, not crude oil. It is uniquely engineered from our revolutionary PurePlus™ gas-to-liquid technology which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Because it is made from natural gas, the base oil contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology, creates one of the best formulations in our Pennzoil high mileage portfolio. As your car ages, leaks may develop and cause higher oil consumption and oil burn off, potentially causing your engine to need frequent top-offs. Pennzoil Platinum High Mileage motor oil is enhanced with an excellent combination of special conditioning seal agents and additives to help stop leaks from seals and reduce the oil consumption that is typical of older and worn engines. Our full synthetic high mileage motor oil also protects engines from loss of horsepower, offers excellent performance in extreme temperatures, provides unsurpassed wear protection (based on Sequence IVA wear test using SAE 5W-30), and protection against abnormal combustion phenomenon like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines. Pennzoil Platinum High Mileage SAE 0W-20 is engineered to help keep engines clean by gently lifting deposits and keeping them away from critical moving engine parts In fact, it keeps pistons up to 45% cleaner than the toughest industry standards (Based on Sequence IIIH results).

  • checkmark
    Specifications, Approvals and Recommendations: •FCA MS-6395 •Ford WSS-M2C947-B1
  • checkmark
    Exceeds the requirements of the following industry specifications: •API SP and all previous categories •ILSAC GF-6
  • checkmark
    This product is carbon neutral. The CO2e emissions of the lifecycle of this product have been offset with verified Nature Based Carbon Credits. For full details visit Pennzoil.com

Pennzoil Platinum High Mileage SAE 0W-20 is a full synthetic motor oil made from natural gas, not crude oil. It is uniquely engineered from our revolutionary PurePlus™ gas-to-liquid technology which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Because it is made from natural gas, the base oil contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology, creates one of the best formulations in our Pennzoil high mileage portfolio. As your car ages, leaks may develop and cause higher oil consumption and oil burn off, potentially causing your engine to need frequent top-offs. Pennzoil Platinum High Mileage motor oil is enhanced with an excellent combination of special conditioning seal agents and additives to help stop leaks from seals and reduce the oil consumption that is typical of older and worn engines. Our full synthetic high mileage motor oil also protects engines from loss of horsepower, offers excellent performance in extreme temperatures, provides unsurpassed wear protection (based on Sequence IVA wear test using SAE 5W-30), and protection against abnormal combustion phenomenon like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines. Pennzoil Platinum High Mileage SAE 0W-20 is engineered to help keep engines clean by gently lifting deposits and keeping them away from critical moving engine parts In fact, it keeps pistons up to 45% cleaner than the toughest industry standards (Based on Sequence IIIH results).

  • checkmark
    Specifications, Approvals and Recommendations: •FCA MS-6395 •Ford WSS-M2C947-B1
  • checkmark
    Exceeds the requirements of the following industry specifications: •API SP and all previous categories •ILSAC GF-6
  • checkmark
    This product is carbon neutral. The CO2e emissions of the lifecycle of this product have been offset with verified Nature Based Carbon Credits. For full details visit Pennzoil.com