NuTech Remanufactured Long Block Engine DFYS
    Pinch with 2 fingers to zoom

    NuTech Remanufactured Long Block Engine DFYS

    NuTech567258
    Part # DFYS
    SKU # 567258

    Price Not Available

    PRODUCT SPECIFICATIONS

    Part #DFYS
    SKU #567258
    Weight500lbs
    Location:Engine
    Warranty
    Product Bulletins
    Part #
    DFYS
    SKU #
    567258
    Weight
    500lbs
    Location:
    Engine
    Warranty

    PRODUCT DESCRIPTION

    Your remanufactured engine is tested in several specific ways after being assembled; Multiple Pressure tests. Each component is carefully checked after being cleaned to see if cracks or other defects exist in the casting. After being assembled, we pressurize the water jacket with 30lbs. of air pressure. As a result of these tests, you can be sure your unit will not have coolant leaks. SIM test, After pressure testing, our final check of engine performance is a spin test. We turn the engine at 400 RPM with oil pressure lines attached. The test measures compression on each cylinder, oil pressure, oil flow and allows an easy visual check that oil is reaching all critical areas. This test also allows the rear main seal to be checked for leaks. We produce most engines as long block assemblies that ship with a finishing gasket set and a new oil pump. We also produce many of the most popular engines as dressed alternatives. These engines save installer?s time and money as they come complete with oil pan and/or front cover and in some cases valve covers already installed.

    • checkmark
      Engines come with installation gasket sets and oil pumps unless noted otherwise
    • checkmark
      Long blocks securely packaged for safe delivery and easy core return from nationwide warehouses for fast delivery.
    • checkmark
      Sim tested for compression, leaks, noises & oil pressure.
    • checkmark
      Every engine that we re manufacture is reverse engineered to ensure that any original factory defects are removed.

    Your remanufactured engine is tested in several specific ways after being assembled; Multiple Pressure tests. Each component is carefully checked after being cleaned to see if cracks or other defects exist in the casting. After being assembled, we pressurize the water jacket with 30lbs. of air pressure. As a result of these tests, you can be sure your unit will not have coolant leaks. SIM test, After pressure testing, our final check of engine performance is a spin test. We turn the engine at 400 RPM with oil pressure lines attached. The test measures compression on each cylinder, oil pressure, oil flow and allows an easy visual check that oil is reaching all critical areas. This test also allows the rear main seal to be checked for leaks. We produce most engines as long block assemblies that ship with a finishing gasket set and a new oil pump. We also produce many of the most popular engines as dressed alternatives. These engines save installer?s time and money as they come complete with oil pan and/or front cover and in some cases valve covers already installed.

    • checkmark
      Engines come with installation gasket sets and oil pumps unless noted otherwise
    • checkmark
      Long blocks securely packaged for safe delivery and easy core return from nationwide warehouses for fast delivery.
    • checkmark
      Sim tested for compression, leaks, noises & oil pressure.
    • checkmark
      Every engine that we re manufacture is reverse engineered to ensure that any original factory defects are removed.