GM Cadillac Deville_Fleetwood_ELD_Seville 1990-1998

Console

Print

REMOVAL & INSTALLATION



1990 Deville and Fleetwood With 45/55 Split Seat


Click image to see an enlarged view

Fig. Console-1990 Deville and Fleetwood with 45/55 split seat

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the 4 mounting bolts.
  4.  
  5. Detach the wiring connector.
  6.  
  7. Remove the console.
  8.  

To install:

  1. Position the console in the vehicle and install the mounting bolts.
  2.  
  3. Attach the wiring connector.
  4.  
  5. Connect the negative battery cable.
  6.  

1990-91 Eldorado and Seville Front Console


Click image to see an enlarged view

Fig. Front console (upper)-1990-91 Eldorado and Seville



Click image to see an enlarged view

Fig. Front console wiring-1990-91 Eldorado and Seville



Click image to see an enlarged view

Fig. Instrument panel support rod-1990-91 Eldorado and Seville



Click image to see an enlarged view

Fig. Front console-to-instrument panel attachment-1990-91 Eldorado and Seville



Click image to see an enlarged view

Fig. Front console (lower)-1990-91 Eldorado and Seville

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the gearshift retaining clip and knob.
  4.  
  5. Remove the 2 retaining screws and remove the storage compartment assembly.
  6.  
  7. Pull the ashtray from the ashtray housing.
  8.  
  9. Detach the cigar lighter wiring connector.
  10.  
  11. Remove the retaining screw and the ashtray housing assembly.
  12.  
  13. Remove the 5 upper console retaining screws.
  14.  
  15. Disconnect the illumination bulbs and sockets and remove the upper console assembly.
  16.  
  17. Remove the retaining screw and 2 nuts retaining the lower console to the brackets.
  18.  
  19. Remove the 2 lower console-to-instrument panel retaining screws, the support rod and the lower console.
  20.  

To install:

  1. Install the lower console and support rod.
  2.  
  3. Install the 2 lower console-to-instrument panel retaining screws.
  4.  
  5. Install the screw and 2 nuts securing the lower console to the brackets.
  6.  
  7. Connect the bulbs and sockets to the upper console and install the upper console. Install the 5 upper-to-lower console retaining screws.
  8.  
  9. Install the ashtray housing and attach the cigar lighter wiring connector. Push the ashtray into the housing.
  10.  
  11. Install the storage compartment with the retaining screws.
  12.  
  13. Install the gearshift handle and retaining clip.
  14.  
  15. Connect the negative battery cable.
  16.  

1990-91 Seville STS Rear Console


Click image to see an enlarged view

Fig. Rear console assembly-1990-91 Seville STS



Click image to see an enlarged view

Fig. Lumbar seat air pump and control assembly-1990-91 Seville STS

  1. Disconnect the negative battery cable.
  2.  
  3. Open the upper and lower storage compartment doors. Remove the upper and lower storage compartment boxes by gently prying up and out of the console assembly.
  4.  
  5. Remove the 2 lower retaining bolts and 2 upper retaining screws.
  6.  
  7. Remove the 3 screws retaining the lumbar seat air pump and control assembly from the back of the upper console assembly.
  8.  
  9. Lift and remove the console assembly.
  10.  

To install:

  1. Position the console assembly in the vehicle.
  2.  
  3. Install the lumbar seat air pump and control assembly on the back of the upper console and secure with the 3 screws.
  4.  
  5. Install the console retaining screws and bolts.
  6.  
  7. Snap the upper and lower storage compartment boxes into place.
  8.  
  9. Connect the negative battery cable.
  10.  

1992-98 Seville, Eldorado; 1994-98 Deville Full Console


Click image to see an enlarged view

Fig. Gear selector assembly-1992-98 Eldorado and Seville



Click image to see an enlarged view

Fig. Console wiring connectors-1992-98 Eldorado and Seville



Click image to see an enlarged view

Fig. Full console-1992-98 Eldorado and Seville

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the storage compartment by pulling up and out.
  4.  
  5. Remove the gearshift handle retaining clip and handle.
  6.  
  7. Gently pull the console upper trim plate up and out.
  8.  
  9. Detach the wiring connector for the cigar lighter.
  10.  
  11. Remove the radio.
  12.  
  13. Remove the 4 console-to-instrument panel retaining screws.
  14.  
  15. Remove the gear selector trim plate, which is retained by clips, and the PRNDL illumination lamp socket.
  16.  
  17. Remove the 2 shifter plate upper mounting bolts and the 2 nuts retaining the shifter assembly to the floor.
  18.  
  19. Working through the storage compartment opening, remove the 2 console-to-floor retaining nuts.
  20.  
  21. Turn to release the console blower air supply duct.
  22.  
  23. Slide the console up, then label and detach the wiring connectors.
  24.  
  25. Slide the console back to clear the shifter and remove the console.
  26.  

To install:

  1. Position the console over the shifter and attach the wiring connectors.
  2.  
  3. Turn to push on the console blower air supply duct.
  4.  
  5. Working through the storage compartment opening, install the 2 console-to-floor retaining nuts.
  6.  
  7. Install the 2 shifter assembly-to-floor retaining nuts and the 2 shifter plate upper mounting bolts.
  8.  
  9. Install the PRNDL illumination lamp socket and gear selector trim plate.
  10.  
  11. Install the 4 console-to-instrument panel retaining screws.
  12.  
  13. Install the radio.
  14.  
  15. Attach the wiring connector for the cigar lighter and install the console upper trim plate.
  16.  
  17. Install the gearshift handle and retaining clip.
  18.  
  19. Install the storage compartment.
  20.  
  21. Connect the negative battery cable.
  22.  

1992-98 Seville, Eldorado; 1994-98 Deville Mini-Console
  1. Disconnect the negative battery cable.
  2.  
  3. Pull the storage compartment up and out.
  4.  
  5. Working through the storage compartment opening, remove the 2 retaining nuts.
  6.  
  7. Remove a console-to-floor retaining bolt from each side of the front of the console.
  8.  
  9. Label and detach the wiring connectors.
  10.  
  11. Remove the console.
  12.  

To install:

  1. Position the console in the vehicle and attach the wiring connectors.
  2.  
  3. Install a console-to-floor retaining bolt at each side of the front of the console.
  4.  
  5. Working through the storage compartment opening, install the 2 retaining nuts.
  6.  
  7. Install the storage compartment.
  8.  
  9. Connect the negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo