GM Cavalier/Sunfire 1995-2000 Repair Guide

VACUUM DIAGRAMS

Print

See Figures 1, 2, 3, 4, 5 and 6



Click image to see an enlarged view

Fig. Fig. 1: The Vehicle Emission Control Information or VECI label is usually attached to the passenger side strut tower in the engine compartment

Following are vacuum diagrams for most of the engine and emissions package combinations covered by this guide. Because vacuum circuits will vary based on various engine and vehicle options, always refer first to the vehicle emission control information label, if present. Should the label be missing, or should vehicle be equipped with a different engine from the vehicle's original equipment, refer to the diagrams below for the same or similar configuration.

If you wish to obtain a replacement emissions label, most manufacturers make the labels available for purchase. The labels can usually be ordered from a local dealer.



Click image to see an enlarged view

Fig. Fig. 2: 1995 2.2L (VIN 4) vacuum diagram



Click image to see an enlarged view

Fig. Fig. 3: 1995 2.3L (VIN D) vacuum diagram



Click image to see an enlarged view

Fig. Fig. 4: 1996-97 2.2L (VIN 4) vacuum diagram



Click image to see an enlarged view

Fig. Fig. 5: 1996-00 2.4L (VIN T) vacuum diagram



Click image to see an enlarged view

Fig. Fig. 6: 1998-00 2.2L (VIN 4) vacuum diagram

 
label.common.footer.alt.autozoneLogo