MINI 2002-05

Starter

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Battery
     
    Exhaust system from manifold
     
    Exhaust manifold
     
    Heat shield from starter
     
    Oxygen sensor cable from wire clip
     
    Alternator connectors
     
    Starter solenoid connectors
     
    Starter
     

  4.  

To install:

  1. Install or connect the following:

    Starter to transmission; torque mounting bolts to 63 ft. lbs. (85 Nm)
     
    Alternator connector on starter; torque to 10 ft. lbs. (14 Nm)
     
    Oxygen sensor cable to wire clip
     
    Heat shield for starter; torque bolts to 7 ft. lbs. (9 Nm)
     
    Exhaust manifold
     
    Exhaust pipes to manifold
     
    Battery
     

  2.  

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove or disconnect the following:

    Battery
     
    Exhaust system from manifold
     
    Exhaust manifold
     
    Heat shield from starter
     
    Oxygen sensor cable from wire clip
     
    Alternator connectors
     
    Starter solenoid connectors
     
    Starter
     

  4.  

To install:

  1. Install or connect the following:

    Starter to transmission; torque mounting bolts to 63 ft. lbs. (85 Nm)
     
    Alternator connector on starter; torque to 10 ft. lbs. (14 Nm)
     
    Oxygen sensor cable to wire clip
     
    Heat shield for starter; torque bolts to 7 ft. lbs. (9 Nm)
     
    Exhaust manifold
     
    Exhaust pipes to manifold
     
    Battery
     

  2.  

 
label.common.footer.alt.autozoneLogo