CTA Harmonic Balancer Holder
PRODUCT SPECIFICATIONS
| Part # | 1025 |
|---|---|
| SKU # | 470317 |
| Weight | 1lbs |
| Warranty | |
| Inside Diameter (in) | 2.21 |
| Outside Diameter (in) | 4.38 |
| Tool Material | Metal |
| Application | Ford Contour, Ford Taurus, Jagaur S-Type, Lincoln LS, Mercury Sable, Mercury Cougar, Mercury Mystique, Mazda Tribute |
PRODUCT DESCRIPTION
Holds harmonic balancer in place when removing or installing center bolt or Ford Taurus pulley extension. Perfect for tight clearance. No need to lock flywheel. Won't warp balancer. Services 2.5 & 3.0L V6 curated engines from mid 1990’s to 2007, including Ford contour & Taurus, mercury sable, cougar & mystique, Lincoln LS, jaguar s-type, and Mazda tribute. 5/16 In. thick steel base with 1/2 In. square drive. Can use 8 mm x 1.25 bolt to hold tool balancer for some application.
Holds harmonic balancer in place when removing or installing center bolt or Ford Taurus pulley extension- Services 2.5 & 3.0L V6 Duratec engines from mid 1990’s to 2007, including Ford Contour & Taurus, Mercury Sable, Cougar & Mystique, Lincoln LS, Jagaur S-Type, and Mazda Tribute
- 5/16 In. thick steel base with 1/2 In. square drive.
- Can use 8mm x 1.25 bolt to hold tool balancer for some application
Holds harmonic balancer in place when removing or installing center bolt or Ford Taurus pulley extension. Perfect for tight clearance. No need to lock flywheel. Won't warp balancer. Services 2.5 & 3.0L V6 curated engines from mid 1990’s to 2007, including Ford contour & Taurus, mercury sable, cougar & mystique, Lincoln LS, jaguar s-type, and Mazda tribute. 5/16 In. thick steel base with 1/2 In. square drive. Can use 8 mm x 1.25 bolt to hold tool balancer for some application.
- Holds harmonic balancer in place when removing or installing center bolt or Ford Taurus pulley extension
- Services 2.5 & 3.0L V6 Duratec engines from mid 1990’s to 2007, including Ford Contour & Taurus, Mercury Sable, Cougar & Mystique, Lincoln LS, Jagaur S-Type, and Mazda Tribute
- 5/16 In. thick steel base with 1/2 In. square drive.
- Can use 8mm x 1.25 bolt to hold tool balancer for some application
