Specialty Products Ball Joint 23940

Lifted or lowered, factory cams don't give enough adjustment range on the Dodge Ram 1500 series of trucks. Gain 2 1/4 degrees of camber or caster with these offset ball joints. Simply replace the ball joint in the stock upper control arm to get +/- 2 1/4 degrees caster, camber, or a split and then dial in final adjustments with the factory cams.

• 
  Adjustment range: camber or caster ±2.25°
• 
  Installation time: .6 hr/side
• 
  Required: 1 per wheel
• 
  Recommended tools: 72509 ball joint press