SPC Alignment Caster/Camber Bushing 23225
|Notes||Front, With 8 lug axles. 1-1/4 degree sleeve.|
These popular sleeves are widely used to correct front caster and camber on medium duty Ford trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. To save time during alignment, use a zero degree sleeve to determine initial readings, then install correct sleeve.
- Adjustment range: camber/caster +/-2.5 degree
- Installation time: 1/2 hr/side
- Required: 1 per wheel