SPC Alignment Control Arm 67485
1.- Rear suspension
|Notes||Alignment camber fixed change arm. Camber: + 3.25 degree. Quantity per car: 2|
This fixed change arm is ideal for correcting excessive negative camber issues seen in lowered Scion tC's. The Scion tC comes from the factory with a cam bolt that provides +/- 1.25 degrees. This factory change is not enough for lowered vehicles. By increasing the length of the rear upper control arm SPC Performance adds 2 degrees positive camber to the rear suspension that can then be dialed in with the OEM cam bolt.
- Camber Fixed +2.0°
- Installation time: .5 hr/side
- Required: 1 per wheel