Honda Ridgeline Sway Bar Link

Liked these bars, seemed well built. The nice thing is, there is a bolt-like fitting on them that you can get a wrench on, while tightening the nut (the wrench keeps it from spinning). The oem bars have a small hole for a allen wrench to use to keep from spinning while loosening nut, BUT that is usually rusted out and doesn't allow a socket on the nut. I replaced the struts also as you can see from the pic. Not an easy job. Note that I had to cut the existing sway bar off with a saw-zall because the inner nut was unreachable with tools. I saw a video where someone else did the same thing, then had to pound/dremel remaining steel to free the bolt, this was the hardest part of the job.

What kind of vehicle do you drive? Honda Ridgeline

Replaced this sway bar link. Original was very difficult to remove because Allen Head strips. Year later needed a new strut. This link comes off easy because it uses a traditional wrench instead of an Allen.

What kind of vehicle do you drive? 2007 Honda Ridgeline

Better than original equipment. Has a hex nut on the back, no need for the Allen wrench.

What kind of vehicle do you drive? 2012 Honda Ridgeline