Sponsored
Notes: Use old nut to seat the driveshaft, tighten to 258 ft-lb / 350 Nm. Remove old nut, discard and replace with new nut while vehicle is in the air and brake applied, tighten new nut to 258 ft-lb / 350 Nm. New nut must be torqued within 5 minutes of starting the threads. Quantity per car: 2.
- PRICE: 169.99
- Wheel Stud Quantity: 5
- Spline Quantity: 38
- Wheel Studs Included: Yes
- Flange Included: Yes
- Flange Bolt Hole Quantity: 4
- Bolt Circle Diameter: 2.488in
- Flange Shape: Trapezoid
- Anti Lock Braking System Type: Tone Ring
- Flange Offset: 1.69in
- Flange Diameter: 5.738in
- Anti Lock Braking System: No
- Anti Lock Brake Sensor Included: No
