Installation of Mirror with Snap Tab Backing Plate
Berko is the after market leader in providing quality products and solutions for broken side view mirrors. The following video equips you with easy to use instructions for installing your Berko replacement mirror. Berko is ready. Set go mirror replacements are an ideal choice. If you're backing, plate is broken or missing. Ready set Go mirror replacements. Eliminate the need to remove broken glass, making for a quick and easy install. Reference the install code on your ready set go box. Replacing a damaged side view mirror can be performed in five easy steps. Ready set go mirror replacements are complete with a pre applied motor mount. The backing plate shown in this installation may not be an exact match to yours. However, the installation techniques are the same. You will need these tools to install your Berko mirror replacement. Please follow industry accepted recommendations for personal safety. Place a towel on the edge of the mirror head to protect the vehicle. Manually pivot the mirror downward by applying pressure to the lower portion of the mirror. Insert the screwdriver or putty knife above the mirror and behind the backing plate. Carefully pry off the backing plate. Snap tabs from the motor head. If the original mirror is a heated mirror, disconnect wires from the mirrors. Heating element. Auto dimming wires may have to be disconnected or clipped and capped. Berko Mirror replacements Do not auto dim. If applicable, reconnect heating wires to the mirrors. Terminal leads test functionalities before proceeding to the next step line. Motor mount snap tabs with a motor. Apply gentle, even pressure until the motor mount snaps onto the motor head. Clean the installed ready set. Go mirror replacement with glass cleaner. For additional information, visit Berko Inc dot com.