Replacement of the Lower Hook Lock Backing Plate and Mirror
Marco is the after market leader in providing quality products and solutions for broken side view mirrors. The following video equips you with easy to use instructions for installing your Berko replacement mirror. Berko is ready. Set go mirror replacements are an ideal choice. If you're backing, plate is broken or missing. Ready set Go mirror replacements. Eliminate the need to remove broken glass, making for a quick and easy install. Reference the installed code on your ready set go box replacing a damaged side view mirror can be performed in five easy steps using Berko Ready set go replacement mirrors Ready set go mirror replacements are complete with a pre applied motor mount. The backing plate shown in this installation may not be an exact match to yours. However. The installation techniques are the same. You will need these tools to install your Berko mirror replacement. Please follow industry accepted recommendations for personal safety. Place the towel on the edge of the mirror head to protect the vehicle. Manually pivot the mirror and backing plate downward by applying pressure to the lower portion of the mirror. Insert the screwdriver or putty knife above the mirror and backing plate and carefully pry the upper snap locks out of the snap lock guides after the upper snap locks. Pop off disconnect wires from the mirrors heating element. Pull up and out to release the lower hook locks from the hook. Lock guides. If applicable, auto dimming wires may have to be disconnected or clipped and cap Berko mirror replacements. Do not auto dim. If applicable, reconnect heating wires to the ready set. Go mirrors. Terminal leads Test functionalities before proceeding to the next step. Insert the lower hook locks into the hook. Lock guides. Be sure the lower hook locks are fully seated. Next, apply gentle pressure and snapped the upper snap locks into the snap lock guide. Clean the installed ready set. Go mirror replacement with glass cleaner. For additional information, visit Berko Inc dot com.