Replacement of the Upper Hook Lock Backing Plate and Mirror
Berko is the after market leader in providing quality products and solutions for broken side view mirrors. The following video equips you with easy to use instructions for installing your Berko replacement mirror. Berko is ready. Set go mirror replacements are an ideal choice. If you're backing, plate is broken or missing. Ready set Go mirror replacements. Eliminate the need to remove broken glass, making for a quick and easy install. Reference the installed code on your ready set go box replacing a damaged side view mirror can be performed in five easy steps using Berko Ready set go replacement mirrors Ready set go mirror replacements are complete with a pre applied motor mount. The backing plate shown in this installation may not be an exact match to yours. However. The installation techniques are the same. You will need these tools to install your Berko mirror replacement. Please follow industry accepted recommendations for personal safety. Place a towel on the edge of the mirror head to protect the vehicle. Manually pivot the mirror and backing plate upward by applying pressure on the upper portion of the mirror. Insert the flathead screwdriver or putty knife below the mirror and backing plate and carefully pry lower snap locks off the snap lock guides once the lower snap locks pop off, pulled down and out to release the upper hook locks from the hook. Lock guides. If the original mirror is a heated mirror, disconnect wires from the mirrors. Heating element. If applicable, auto dimming wires may have to be disconnected or clipped and capped. Berko Mirror replacements Do not auto dim. If applicable, Reconnect heating wires to the mirrors. Terminal leads test functionalities before proceeding to the next step. Insert the upper hook locks into the hook. Lock guides. Be sure upper hook locks are fully seated. Next, apply gentle pressure and snap lower snap locks into snap lock guides. Clean the installed ready set. Go mirror replacement with glass cleaner. For additional information, visit Berko Inc dot com.