2018 Cadillac ATS Brake Rotor

Notes: Rotor only, 321 mm rotor. Brembo brakes. Duralast coated. Coated on hat and edge for rust prevention.

• PRICE: 122.99
• Location:: Front
• ABS Tone Ring Included: No
• Material: Iron Alloy
• Mounting Bolt Hole Circle Diameter: 4.528in
• Center Hole Diameter: 70.7mm
• Discard Thickness: 1.063in
• Solid Or Vented Type Rotor: Vented
• Grade Type: Standard Replacement
• Surface Type: Smooth
• Stud/Lug Hole Quantity: 5
• Overall Height: 2.402in
• Outside Diameter: 12.638in
• Directional or Non-Directional Brake Surface: Non-Directional
• Mounting Bolt Hole Quantity: 5

Notes: Rotor only, Coupe. Duralast coated. Coated on hat and edge for rust prevention.

• PRICE: 95.99
• Location:: Front
• Outside Diameter: 300.3mm
• ABS Tone Ring Included: No
• Mounting Bolt Hole Circle Diameter: 115.0mm
• Material: Iron Alloy
• Inside Diameter: 149.0mm
• Solid Or Vented Type Rotor: Vented
• Grade Type: Standard Replacement
• Discard Thickness: 23.0mm
• Nominal Thickness: 26.0mm
• Surface Type: Smooth
• Stud/Lug Hole Quantity: 5
• Overall Height: 61.2mm
• Rust Resistant Coating: Yes
• Mounting Bolt Hole Quantity: 5
• Center Hole Diameter: 70.8mm
• Directional or Non-Directional Brake Surface: Non-Directional

Notes: Rotor only, 339 mm rotor. Coated. Quantity per car: 2. Coated on hat and edge for rust prevention.

• PRICE: 116.99
• Location:: Rear
• Discard Thickness: 24.0mm
• Overall Height: 48.0mm
• ABS Tone Ring Included: No
• Nominal Drum Diameter: 194.2mm
• Material: Iron Alloy
• Nominal Thickness: 26.2mm
• Outside Diameter: 339.0mm
• Solid Or Vented Type Rotor: Vented
• Center Hole Diameter: 67.5mm
• Mounting Bolt Hole Circle Diameter: 120.0mm
• Grade Type: Standard Replacement
• Surface Type: Smooth
• Stud/Lug Hole Quantity: 5
• Rust Resistant Coating: Yes
• Inside Diameter: 194.2mm
• Mounting Bolt Hole Quantity: 5
• Directional or Non-Directional Brake Surface: Non-Directional

Notes: Rotor only, 315 mm rotor. Coated. Quantity per car: 2. Coated on hat and edge for rust prevention.

• PRICE: 94.99
• Location:: Rear
• ABS Tone Ring Included: No
• Overall Height: 48.0mm
• Mounting Bolt Hole Circle Diameter: 115.0mm
• Material: Iron Alloy
• Discard Thickness: 21.0mm
• Nominal Thickness: 23.0mm
• Inside Diameter: 201.0mm
• Outside Diameter: 315.0mm
• Solid Or Vented Type Rotor: Vented
• Grade Type: Standard Replacement
• Stud/Lug Hole Quantity: 5
• Surface Type: Smooth
• Rust Resistant Coating: Yes
• Directional or Non-Directional Brake Surface: Non-Directional
• Mounting Bolt Hole Quantity: 5
• Center Hole Diameter: 70.8mm

Notes: Rotor only, Coupe.

• PRICE: 106.99
• Location:: Front
• Outside Diameter: 300.3mm
• Mounting Bolt Hole Circle Diameter: 115.0mm
• ABS Tone Ring Included: No
• Material: Iron Alloy
• Solid Or Vented Type Rotor: Vented
• Inside Diameter: 149.0mm
• Grade Type: Standard Replacement
• Discard Thickness: 23.0mm
• Nominal Thickness: 26.0mm
• Surface Type: Smooth
• Stud/Lug Hole Quantity: 5
• Overall Height: 61.2mm
• Mounting Bolt Hole Quantity: 5
• Center Hole Diameter: 70.8mm
• Rust Resistant Coating: Yes
• Directional or Non-Directional Brake Surface: Non-Directional

Notes: Rotor only, 339 mm rotor.

• PRICE: 131.99
• Location:: Rear
• Discard Thickness: 24.0mm
• Overall Height: 48.0mm
• Nominal Drum Diameter: 194.2mm
• ABS Tone Ring Included: No
• Material: Iron Alloy
• Nominal Thickness: 26.2mm
• Outside Diameter: 339.0mm
• Solid Or Vented Type Rotor: Vented
• Center Hole Diameter: 67.5mm
• Mounting Bolt Hole Circle Diameter: 120.0mm
• Grade Type: Standard Replacement
• Surface Type: Smooth
• Stud/Lug Hole Quantity: 5
• Mounting Bolt Hole Quantity: 5
• Rust Resistant Coating: Yes
• Inside Diameter: 194.2mm
• Directional or Non-Directional Brake Surface: Non-Directional

Notes: Disc Brake Rotor. Sedan. With Prime. With Brake Code J55.

• PRICE: 172.99
• Location:: Front
• ABS Tone Ring Included: No
• Construction: Composite
• Overall Height: 61.0mm
• Grade Type: Premium
• Outside Diameter: 321.0mm
• Discard Thickness: 27.0mm
• Material: High Carbon Cast Iron
• Solid Or Vented Type Rotor: Vented
• Stud/Lug Hole Quantity: 5
• Nominal Thickness: 30.0mm
• Surface Type: Smooth
• Mounting Bolt Hole Circle Diameter: 70.8mm
• Rust Resistant Coating: Yes
• Center Hole Diameter: 70.8mm

Notes: Disc Brake Rotor. With Prime. With Brake Code JE5.

• PRICE: 156.99
• Location:: Front
• ABS Tone Ring Included: No
• Construction: Composite
• Grade Type: Premium
• Overall Height: 61.0mm
• Material: High Carbon Cast Iron
• Outside Diameter: 300.0mm
• Solid Or Vented Type Rotor: Vented
• Stud/Lug Hole Quantity: 5
• Discard Thickness: 23.0mm
• Nominal Thickness: 26.0mm
• Surface Type: Smooth
• Mounting Bolt Hole Circle Diameter: 70.8mm
• Rust Resistant Coating: Yes
• Center Hole Diameter: 70.8mm

Notes: Prime. Quantity per car: 2.

• PRICE: 101.99
• Location:: Rear
• ABS Tone Ring Included: No
• Construction: Composite
• Overall Height: 48.0mm
• Grade Type: Premium
• Discard Thickness: 21.0mm
• Nominal Thickness: 23.0mm
• Outside Diameter: 315.0mm
• Solid Or Vented Type Rotor: Vented
• Stud/Lug Hole Quantity: 5
• Surface Type: Smooth
• Mounting Bolt Hole Circle Diameter: 70.8mm
• Center Hole Diameter: 70.8mm
• Rust Resistant Coating: Yes
• Material: Gray Cast Iron

Notes: Rotor only, Heavy duty front and rear disc brakes with Anti-lock Braking System (ABS). (J6G). Left. With GM Genuine Parts.

• PRICE: 710.99
• Location:: Front
• ABS Tone Ring Included: No
• Nominal Thickness: 1.34in
• Stud/Lug Hole Diameter: 0.66in
• Center Hole Diameter: 69mm
• Hat Finish: Coated
• Construction: Full Cast
• Inside Diameter: 156.8mm
• Overall Height: 2.32in
• Material: Cast Iron
• Solid Or Vented Type Rotor: Vented
• Conventional Or Drum-In-Hat Type Rotor: Conventional
• Weight: 26.48lb
• Mounting Bolt Hole Circle Diameter: 4.72in
• Grade Type: Standard Replacement
• Surface Type: Smooth
• Stud/Lug Hole Quantity: 5
• Discard Thickness: 32mm
• Stud/Lug Hole Circle Diameter: 4.72in
• Pad Contact Surface Width: 69.5mm
• Disc Finish: Ground
• Rust Resistant Coating: Yes
• Bearings Included: No
• Directional or Non-Directional Brake Surface: Non-Directional
• Stud Thread Diameter: 16mm
• Outside Diameter: 370mm

Notes: Rotor only, Heavy duty front and rear disc brakes with Anti-lock Braking System (ABS). (J6G). Right. With GM Genuine Parts.

• PRICE: 710.99
• Location:: Front
• ABS Tone Ring Included: No
• Outside Diameter: 369.95mm
• Stud/Lug Hole Diameter: 0.65in
• Inside Diameter: 160mm
• Overall Height: 59.8mm
• Center Hole Diameter: 69mm
• Construction: Full Cast
• Nominal Thickness: 30mm
• Stud/Lug Hole Circle Diameter: 4.51in
• Material: Cast Iron
• Solid Or Vented Type Rotor: Vented
• Conventional Or Drum-In-Hat Type Rotor: Conventional
• Weight: 26.48lb
• Surface Type: Smooth
• Stud/Lug Hole Quantity: 5
• Mounting Bolt Hole Circle Diameter: 4.51mm
• Disc Finish: Ground
• Rust Resistant Coating: Yes
• Grade Type: Performance
• Bearings Included: No
• Directional or Non-Directional Brake Surface: Non-Directional
• Stud Thread Diameter: 16mm

Notes: Rotor only, Sub model Base. 4 door. Sedan. CAN, USA region. Front and rear antilock brakes (JE5). With GM Genuine Parts.

• PRICE: 178.99
• Location:: Front
• ABS Tone Ring Included: No
• Inside Diameter: 145mm
• Overall Height: 2.64in
• Outside Diameter: 305mm
• Stud/Lug Hole Circle Diameter: 4.53in
• Mounting Bolt Hole Circle Diameter: 4.53in
• Hat Finish: Coated
• Construction: Full Cast
• Discard Thickness: 0.91in
• Nominal Thickness: 30mm
• Material: Cast Iron
• Solid Or Vented Type Rotor: Vented
• Conventional Or Drum-In-Hat Type Rotor: Conventional
• Weight: 19.07lb
• Grade Type: Standard Replacement
• Surface Type: Smooth
• Stud/Lug Hole Quantity: 5
• Pad Contact Surface Width: 63mm
• Disc Finish: Ground
• Rust Resistant Coating: Yes
• Bearings Included: No
• Directional or Non-Directional Brake Surface: Non-Directional

Notes: Rotor only, 4 door. Sedan. With GM Genuine Parts. Heavy duty power brake system (J55).

• PRICE: 224.99
• Location:: Front
• ABS Tone Ring Included: No
• Inside Diameter: 156mm
• Stud/Lug Hole Diameter: 0.55in
• Stud/Lug Hole Circle Diameter: 4.42in
• Center Hole Diameter: 69mm
• Hat Finish: Coated
• Construction: Full Cast
• Overall Height: 45.97mm
• Weight: 22.58lb
• Solid Or Vented Type Rotor: Vented
• Material: Cast Iron
• Nominal Thickness: 1.18in
• Outside Diameter: 321mm
• Conventional Or Drum-In-Hat Type Rotor: Conventional
• Grade Type: Standard Replacement
• Surface Type: Smooth
• Stud/Lug Hole Quantity: 5
• Mounting Bolt Hole Circle Diameter: 4.42mm
• Discard Thickness: 1.1in
• Disc Finish: Ground
• Rust Resistant Coating: Yes
• Bearings Included: No
• Directional or Non-Directional Brake Surface: Non-Directional

Notes: Rotor only, 2 door. Coupe. Front and rear antilock brakes (JE5). With GM Genuine Parts. Heavy duty power brake system (J55).

• PRICE: 201.99
• Location:: Rear
• Overall Height: 48mm
• ABS Tone Ring Included: No
• Stud/Lug Hole Circle Diameter: 4.43in
• Discard Thickness: 21mm
• Center Hole Diameter: 71mm
• Mounting Bolt Hole Diameter: 8.4mm
• Stud/Lug Hole Diameter: 14mm
• Outside Diameter: 314.91mm
• Nominal Thickness: 0.91in
• Hat Finish: Coated
• Construction: Full Cast
• Mounting Bolt Hole Circle Diameter: 4.43mm
• Material: Cast Iron
• Solid Or Vented Type Rotor: Vented
• Conventional Or Drum-In-Hat Type Rotor: Conventional
• Surface Type: Smooth
• Stud/Lug Hole Quantity: 5
• Grade Type: Performance
• Rust Resistant Coating: Yes
• Mounting Bolt Hole Quantity: 5
• Directional or Non-Directional Brake Surface: Non-Directional
• Disc Finish: Ground
• Inside Diameter: 7.91in
• Bearings Included: No
• Weight: 16.16lb

Notes: Rotor only, Heavy duty power brake system (J55). Front and rear antilock brakes (JE5). Sub model Base. 4 door. Sedan. CAN, USA region. With GM Genuine Parts.

• PRICE: 214.99
• Location:: Rear
• ABS Tone Ring Included: No
• Mounting Bolt Hole Circle Diameter: 4.53mm
• Discard Thickness: 21mm
• Outside Diameter: 315mm
• Center Hole Diameter: 71mm
• Stud/Lug Hole Diameter: 0.55in
• Stud/Lug Hole Circle Diameter: 4.53in
• Hat Finish: Coated
• Construction: Full Cast
• Overall Height: 47.5mm
• Material: Cast Iron
• Solid Or Vented Type Rotor: Vented
• Conventional Or Drum-In-Hat Type Rotor: Conventional
• Grade Type: Standard Replacement
• Surface Type: Smooth
• Stud/Lug Hole Quantity: 5
• Nominal Thickness: 23mm
• Disc Finish: Ground
• Rust Resistant Coating: Yes
• Bearings Included: No
• Directional or Non-Directional Brake Surface: Non-Directional
• Inside Diameter: 7.91in
• Weight: 16.16lb

Notes: Front, Disc Brake Rotor. 4 Piston Front Calipers. R1 Concepts Geospec coated rotor. Quantity per car: 2.

• PRICE: 97.99
• ABS Tone Ring Included: No
• Hat Finish: GEOSPEC Silver Grey
• Mounting Bolt Hole Circle Diameter: 115mm
• Disc Finish: Plain
• Outside Diameter: 321mm
• Solid Or Vented Type Rotor: Vented
• Surface Type: Smooth
• Stud/Lug Hole Quantity: 5
• Overall Height: 61.2mm
• Rust Resistant Coating: Yes
• Grade Type: Performance
• Directional or Non-Directional Brake Surface: Non-Directional

Notes: Front, Disc Brake Rotor. 4 Piston Front Calipers. R1 Concepts brake rotor. Quantity per car: 2.

• PRICE: 81.99
• ABS Tone Ring Included: No
• Mounting Bolt Hole Circle Diameter: 115mm
• Disc Finish: Plain
• Outside Diameter: 321mm
• Solid Or Vented Type Rotor: Vented
• Surface Type: Smooth
• Stud/Lug Hole Quantity: 5
• Hat Finish: Rust Preventative
• Overall Height: 61.2mm
• Rust Resistant Coating: Yes
• Grade Type: Performance
• Directional or Non-Directional Brake Surface: Non-Directional

Notes: Disc Brake Rotor. 6 Piston Front Calipers. R1 Concepts brake rotor. Quantity per car: 2.

• PRICE: 83.99
• Overall Height: 48.2mm
• ABS Tone Ring Included: No
• Mounting Bolt Hole Circle Diameter: 120mm
• Disc Finish: Plain
• Outside Diameter: 339mm
• Solid Or Vented Type Rotor: Vented
• Surface Type: Smooth
• Stud/Lug Hole Quantity: 5
• Hat Finish: Rust Preventative
• Rust Resistant Coating: Yes
• Grade Type: Performance
• Directional or Non-Directional Brake Surface: Non-Directional

Notes: Disc Brake Rotor. 4 Piston Front Calipers. R1 Concepts Geospec coated rotor. Quantity per car: 2.

• PRICE: 74.99
• Location:: Rear
• Overall Height: 48mm
• ABS Tone Ring Included: No
• Hat Finish: GEOSPEC Silver Grey
• Outside Diameter: 315mm
• Mounting Bolt Hole Circle Diameter: 115mm
• Disc Finish: Plain
• Solid Or Vented Type Rotor: Vented
• Surface Type: Smooth
• Stud/Lug Hole Quantity: 5
• Rust Resistant Coating: Yes
• Grade Type: Performance
• Directional or Non-Directional Brake Surface: Non-Directional

Notes: Disc Brake Rotor. 6 Piston Front Calipers. R1 Concepts Geospec coated rotor. Quantity per car: 2.

• PRICE: 94.99
• Overall Height: 48.2mm
• ABS Tone Ring Included: No
• Mounting Bolt Hole Circle Diameter: 120mm
• Hat Finish: GEOSPEC Silver Grey
• Disc Finish: Plain
• Outside Diameter: 339mm
• Solid Or Vented Type Rotor: Vented
• Surface Type: Smooth
• Stud/Lug Hole Quantity: 5
• Rust Resistant Coating: Yes
• Grade Type: Performance
• Directional or Non-Directional Brake Surface: Non-Directional