2004 Chevrolet Tahoe Brake Rotor

Notes: Rotor only, 305 mm rotor. Duralast coated. Coated on hat and edge for rust prevention.

• PRICE: 78.99
• Location:: Front
• ABS Tone Ring Included: No
• Stud/Lug Hole Quantity: 6
• Discard Thickness: 27.2mm
• Center Hole Diameter: 78.6mm
• Grade Type: Regular
• Mounting Bolt Hole Circle Diameter: 139.7mm
• Mounting Bolt Hole Quantity: 6
• Solid Or Vented Type Rotor: Vented
• Surface Type: Smooth
• Outside Diameter: 304.7mm
• Directional or Non-Directional Brake Surface: Non-Directional
• Overall Height: 58mm

Notes: Rotor only, 330 mm rotor. Coated. Quantity per car: 2. Coated on hat and edge for rust prevention.

• PRICE: 81.99
• Location:: Rear
• ABS Tone Ring Included: No
• Inside Diameter: 210.2mm
• Stud/Lug Hole Quantity: 6
• Material: Iron Alloy
• Outside Diameter: 330.0mm
• Overall Height: 95.6mm
• Nominal Drum Diameter: 210.2mm
• Mounting Bolt Hole Circle Diameter: 139.7mm
• Discard Thickness: 28.5mm
• Mounting Bolt Hole Quantity: 6
• Solid Or Vented Type Rotor: Vented
• Grade Type: Standard Replacement
• Nominal Thickness: 30.0mm
• Center Hole Diameter: 78.7mm
• Surface Type: Smooth
• Rust Resistant Coating: Yes
• Directional or Non-Directional Brake Surface: Non-Directional

Notes: Rotor only, 305 mm rotor.

• PRICE: 91.49
• Location:: Front
• ABS Tone Ring Included: No
• Stud/Lug Hole Quantity: 6
• Material: Iron Alloy
• Discard Thickness: 27.2mm
• Overall Height: 58.1mm
• Center Hole Diameter: 78.6mm
• Grade Type: Regular
• Nominal Thickness: 29.0mm
• Mounting Bolt Hole Circle Diameter: 139.7mm
• Mounting Bolt Hole Quantity: 6
• Inside Diameter: 183.3mm
• Solid Or Vented Type Rotor: Vented
• Outside Diameter: 305.0mm
• Surface Type: Smooth
• Slotted: No
• Rust Resistant Coating: Yes
• Directional or Non-Directional Brake Surface: Non-Directional

Notes: Rotor only, Ideal for towing, heavy hauling and frequent stopping. 305 mm rotor. Replace in pairs for best performance.

• PRICE: 94.49
• Location:: Front
• Grade Type: Heavy Duty

Notes: Rotor only, 330 mm rotor.

• PRICE: 94.99
• Location:: Rear
• Stud/Lug Hole Quantity: 6
• Inside Diameter: 210.2mm
• ABS Tone Ring Included: No
• Material: Iron Alloy
• Outside Diameter: 330.0mm
• Nominal Drum Diameter: 210.2mm
• Overall Height: 95.6mm
• Mounting Bolt Hole Circle Diameter: 139.7mm
• Discard Thickness: 28.5mm
• Mounting Bolt Hole Quantity: 6
• Solid Or Vented Type Rotor: Vented
• Grade Type: Standard Replacement
• Center Hole Diameter: 78.7mm
• Nominal Thickness: 30.0mm
• Surface Type: Smooth
• Directional or Non-Directional Brake Surface: Non-Directional
• Rust Resistant Coating: Yes

Notes: Rotor only, Ideal for towing, heavy hauling and frequent stopping. 330 mm rotor. Replace in pairs for best performance.

• PRICE: 96.49
• Location:: Rear
• ABS Tone Ring Included: No
• Inside Diameter: 210.2mm
• Stud/Lug Hole Quantity: 6
• Material: Iron Alloy
• Outside Diameter: 330.0mm
• Overall Height: 95.6mm
• Nominal Drum Diameter: 210.2mm
• Grade Type: Regular
• Mounting Bolt Hole Circle Diameter: 139.7mm
• Bolt Hole Quantity: 6
• Discard Thickness: 28.5mm
• Solid Or Vented Type Rotor: Vented
• Mounting Bolt Hole Quantity: 6
• Nominal Thickness: 30.0mm
• Surface Type: Smooth
• Center Hole Diameter: 78.7mm
• Rust Resistant Coating: Yes
• Directional or Non-Directional Brake Surface: Non-Directional

Notes: Disc Brake Rotor. With Prime.

• PRICE: 109.99
• Location:: Front
• ABS Tone Ring Included: No
• Stud/Lug Hole Quantity: 6
• Construction: Composite
• Discard Thickness: 27.2mm
• Grade Type: Premium
• Nominal Thickness: 29.0mm
• Mounting Bolt Hole Circle Diameter: 162.0mm
• Solid Or Vented Type Rotor: Vented
• Outside Diameter: 305.0mm
• Overall Height: 58.0mm
• Surface Type: Smooth
• Center Hole Diameter: 3.11in
• Rust Resistant Coating: Yes
• Material: Gray Cast Iron

Notes: Prime. Quantity per car: 2.

• PRICE: 121.99
• Location:: Rear
• ABS Tone Ring Included: No
• Stud/Lug Hole Quantity: 6
• Construction: Composite
• Outside Diameter: 330.0mm
• Grade Type: Premium
• Mounting Bolt Hole Circle Diameter: 162.0mm
• Discard Thickness: 28.5mm
• Solid Or Vented Type Rotor: Vented
• Nominal Thickness: 30.0mm
• Surface Type: Smooth
• Center Hole Diameter: 3.11in
• Overall Height: 96.0mm
• Rust Resistant Coating: Yes
• Material: Gray Cast Iron

Notes: Rotor only, 6, 400 lb hydraulic system power brake (JH1). 6, 400 lb vacuum power brakes (JC3). 7, 200 lb power brakes (JH2). 7, 200 lb vacuum power brakes (JC4). Delphi/Saginaw. With GM Genuine Parts.

• PRICE: 129.99
• Location:: Front
• ABS Tone Ring Included: No
• Nominal Thickness: 1.14in
• Stud/Lug Hole Quantity: 6
• Inside Diameter: 7.3in
• Stud/Lug Hole Circle Diameter: 5.5in
• Hat Finish: Coated
• Construction: Full Cast
• Weight: 19.09lb
• Solid Or Vented Type Rotor: Vented
• Material: Cast Iron
• Discard Thickness: 0.94in
• Conventional Or Drum-In-Hat Type Rotor: Conventional
• Grade Type: Standard Replacement
• Outside Diameter: 12in
• Surface Type: Smooth
• Overall Height: 57.9mm
• Mounting Bolt Hole Circle Diameter: 5.5mm
• Stud/Lug Hole Diameter: 16mm
• Rust Resistant Coating: Yes
• Disc Finish: Ground
• Bearings Included: No
• Center Hole Diameter: 78mm
• Directional or Non-Directional Brake Surface: Non-Directional

Notes: Rotor only, 330 mm diameter, 90 mm long, OEM #25757801, 30 mm thick. With GM Genuine Parts. 7, 200 lb power brakes (JH2). Stamped #25757801. 30 mm thick.

• PRICE: 148.99
• Location:: Rear
• ABS Tone Ring Included: No
• Stud/Lug Hole Quantity: 6
• Discard Thickness: 1.12in
• Inside Diameter: 206.42mm
• Pad Contact Surface Width: 46mm
• Hat Finish: Painted
• Outside Diameter: 335mm
• Stud/Lug Hole Circle Diameter: 5.5in
• Construction: Full Cast
• Material: Cast Iron
• Solid Or Vented Type Rotor: Vented
• Grade Type: Standard Replacement
• Surface Type: Smooth
• Weight: 18.16lb
• Center Hole Diameter: 76mm
• Nominal Thickness: 34mm
• Overall Height: 99mm
• Mounting Bolt Hole Circle Diameter: 5.47in
• Disc Finish: Ground
• Rust Resistant Coating: Yes
• Bearings Included: No
• Directional or Non-Directional Brake Surface: Non-Directional

Notes: Rotor only, ACDelco Silver coated.

• PRICE: 75.99
• Location:: Front
• ABS Tone Ring Included: No
• Stud/Lug Hole Quantity: 6
• Discard Thickness: 1.07in
• Outside Diameter: 304.8mm
• Mounting Bolt Hole Diameter: 0.635in
• Overall Height: 58.05mm
• Mounting Bolt Hole Circle Diameter: 139.7mm
• Hat Finish: Plain
• Construction: Full Cast
• Weight: 19.6lb
• Material: Cast Iron
• Mounting Bolt Hole Quantity: 6
• Solid Or Vented Type Rotor: Vented
• Conventional Or Drum-In-Hat Type Rotor: Conventional
• Grade Type: Standard Replacement
• Surface Type: Smooth
• Center Hole Diameter: 3.09in
• Nominal Thickness: 29mm
• Disc Finish: Coated
• Rust Resistant Coating: Yes
• Directional or Non-Directional Brake Surface: Non-Directional

Notes: Rotor only, ACDelco Silver non coated.

• PRICE: 57.99
• Location:: Front
• Disc Finish: Non-Directional
• ABS Tone Ring Included: No
• Stud/Lug Hole Quantity: 6
• Discard Thickness: 27.2mm
• Outside Diameter: 304.8mm
• Mounting Bolt Hole Diameter: 0.635in
• Overall Height: 58.05mm
• Mounting Bolt Hole Circle Diameter: 139.7mm
• Hat Finish: Plain
• Construction: Full Cast
• Material: Cast Iron
• Mounting Bolt Hole Quantity: 6
• Solid Or Vented Type Rotor: Vented
• Conventional Or Drum-In-Hat Type Rotor: Conventional
• Grade Type: Standard Replacement
• Surface Type: Smooth
• Center Hole Diameter: 3.09in
• Weight: 19.3lb
• Nominal Thickness: 29mm
• Rust Resistant Coating: No
• Directional or Non-Directional Brake Surface: Non-Directional

Notes: Rotor only, ACDelco Gold performance.

• PRICE: 184.99
• Location:: Front

Notes: Rotor only, ACDelco Gold fully coated.

• PRICE: 92.99
• Location:: Front
• ABS Tone Ring Included: No
• Stud/Lug Hole Quantity: 6
• Overall Height: 2.285IN
• Grade Type: Regular
• Construction: Full Cast
• Discard Thickness: 1.07IN
• Nominal Thickness: 1.142IN
• Mounting Bolt Hole Diameter: 0.635IN
• Material: Cast Iron
• Mounting Bolt Hole Quantity: 6
• Solid Or Vented Type Rotor: Vented
• Conventional Or Drum-In-Hat Type Rotor: Conventional
• Center Hole Diameter: 3.09IN
• Hat Finish: Turned
• Surface Type: Smooth
• Disc Finish: Coated
• Weight: 18.3LB
• Mounting Bolt Hole Circle Diameter: 5.5IN
• Rust Resistant Coating: Yes
• Outside Diameter: 12IN
• Pad Contact Surface Width: 1.9IN
• Directional or Non-Directional Brake Surface: Non-Directional

Notes: Disc Brake Rotor Set. Performance Upgrade Units. With 6 Lug Wheels. With Big Claw.

• PRICE: 644.99
• Location:: Front
• ABS Tone Ring Included: No
• Center Hole Diameter: 3.095in
• Stud/Lug Hole Quantity: 6
• Mounting Bolt Hole Circle Diameter: 139.7mm
• Construction: Full Cast
• Directional or Non-Directional Brake Surface: Directional
• Surface Type: Slotted X Drilled
• Solid Or Vented Type Rotor: Vented
• Material: Cast Iron
• Nominal Thickness: 1.15in
• Overall Height: 58.67mm
• Discard Thickness: 26.67mm
• Outside Diameter: 14.0in
• Grade Type: Performance

Notes: Disc Brake Rotor Set. Performance Upgrade Units. With 6 Lug Wheels. With Big Claw.

• PRICE: 644.99
• Location:: Rear
• Discard Thickness: 27.46mm
• ABS Tone Ring Included: No
• Center Hole Diameter: 3.095in
• Stud/Lug Hole Quantity: 6
• Overall Height: 95.61mm
• Mounting Bolt Hole Circle Diameter: 139.7mm
• Nominal Thickness: 1.181in
• Construction: Full Cast
• Directional or Non-Directional Brake Surface: Directional
• Surface Type: Slotted X Drilled
• Solid Or Vented Type Rotor: Vented
• Material: Cast Iron
• Outside Diameter: 14.0in
• Grade Type: Performance

Notes: Disc Brake Rotor Set. Performance Upgrade Units. With 6 Lug Wheels. With Big Claw. With 2 Piston Rear Calipers.

• PRICE: 644.99
• Location:: Rear
• Stud/Lug Hole Quantity: 6
• Discard Thickness: 27.46mm
• ABS Tone Ring Included: No
• Center Hole Diameter: 3.095in
• Overall Height: 95.61mm
• Mounting Bolt Hole Circle Diameter: 139.7mm
• Nominal Thickness: 1.181in
• Construction: Full Cast
• Directional or Non-Directional Brake Surface: Directional
• Surface Type: Slotted X Drilled
• Solid Or Vented Type Rotor: Vented
• Material: Cast Iron
• Outside Diameter: 14.0in
• Grade Type: Performance

Notes: Disc Brake Rotor. R1 Concepts Geospec coated rotor. Quantity per car: 2.

• PRICE: 91.99
• Location:: Rear
• ABS Tone Ring Included: No
• Stud/Lug Hole Quantity: 6
• Hat Finish: GEOSPEC Silver Grey
• Mounting Bolt Hole Circle Diameter: 139.7mm
• Outside Diameter: 330mm
• Disc Finish: Plain
• Solid Or Vented Type Rotor: Vented
• Surface Type: Smooth
• Overall Height: 95.5mm
• Rust Resistant Coating: Yes
• Grade Type: Performance
• Directional or Non-Directional Brake Surface: Non-Directional