2020 Chevrolet Impala Catalytic Converter

Application: All other states (Federal), OE Direct Fit - Factory mounting style

Notes: Front right, Catalytic Converter. Except Partial Zero Emissions Vehicle. Direct-fit Original Equipment Manufacturer (OEM) grade Federal (not legal for sale or use in California, Colorado and New York).

• PRICE: 566.99
• Finish: Stainless Steel
• California Air Resources Board (CARB) Certified: No
• Inlet Type: Bolt-On
• Heat Shield Attached: No
• Outlet Gasket Included: No
• Body Type: Spun
• Universal Or Specific Fit: Specific
• Tube Material: Stainless Steel
• Oxygen Sensor Location: Pre and Post Converter
• Air Tube Count: 0
• Grade Type: Standard Replacement
• Hangers Included: No
• Overall Length: 13in
• Heat Shield Material: None
• Outlet Type: Bolt-On
• Body Material: Stainless Steel
• Substrate Material: Ceramic
• Inlet Mounting Hardware Included: No
• Sensor Port Count: 2
• Air Tube Adaptable: No
• Clamps Included: No
• Inlet Gasket Included: No
• Outlet Mounting Hardware Included: Yes

Application: All other states (Federal), OE Direct Fit - Factory mounting style

Notes: Rear, Catalytic Converter. Except Partial Zero Emissions Vehicle. Direct-fit Original Equipment Manufacturer (OEM) grade Federal (not legal for sale or use in California, Colorado and New York).

• PRICE: 781.99
• Finish: Stainless Steel
• Overall Length: 56in
• Sensor Port Count: 0
• California Air Resources Board (CARB) Certified: No
• Outlet Mounting Hardware Included: No
• Inlet Type: Bolt-On
• Heat Shield Attached: No
• Outlet Gasket Included: No
• Tube Material: Stainless Steel
• Air Tube Count: 0
• Body Type: Clam-Shell
• Universal Or Specific Fit: Specific Fit
• Grade Type: Standard Replacement
• Hangers Included: Yes
• Inlet Mounting Hardware Included: Yes
• Heat Shield Material: None
• Outlet Type: Bolt-On
• Body Material: Stainless Steel
• Substrate Material: Ceramic
• Air Tube Adaptable: No
• Clamps Included: No
• Inlet Gasket Included: No

Application: All other states (Federal), OE Direct Fit - Factory mounting style

Notes: Front left, Catalytic Converter. Direct-fit Original Equipment Manufacturer (OEM) grade Federal (not legal for sale or use in California, Colorado and New York).

• PRICE: 715.99
• Finish: Stainless Steel
• Outlet Inside Diameter: 2.0
• California Air Resources Board (CARB) Certified: No
• Heat Shield Attached: No
• Inlet Type: Bolt-On
• Outlet Gasket Included: No
• Inlet Inside Diameter: 2.0
• Body Length: 15.2
• Body Type: Spun
• Universal Or Specific Fit: Specific
• Tube Material: Stainless Steel
• Oxygen Sensor Location: Pre and Post Converter
• Air Tube Count: 0
• Grade Type: Standard Replacement
• Hangers Included: No
• Overall Length: 15.25in
• Heat Shield Material: None
• Body Width: 15.2
• Body Material: Stainless Steel
• Outlet Type: Bolt-On
• Substrate Material: Ceramic
• Inlet Mounting Hardware Included: No
• Sensor Port Count: 2
• Air Tube Adaptable: No
• Clamps Included: No
• Inlet Gasket Included: No
• Outlet Mounting Hardware Included: Yes

Application: All other states (Federal), Universal - Requires cut and weld

Notes: Rear, Catalytic Converter. Not for sale or use on vehicles licensed in the states of CA, CO, ME and NY. Restrictions may apply in other states. Check with your state authority for details. Federal and California emissions. Universal converter. Select+Plus. Universal Fit.

• PRICE: 781.99
• California Air Resources Board (CARB) Certified: No
• Universal Or Specific Fit: Universal
• Body Height: 4.0in
• Body Width: 4.0in
• Grade Type: Standard Replacement
• Body Material: Stainless Steel
• Substrate Material: Ceramic
• Body Length: 12.0in

Application: All other states (Federal), OE Direct Fit - Factory mounting style

Notes: Rear, Catalytic Converter. With deep drop step bumper. Not for sale or use on vehicles licensed in the states of CA, CO, ME and NY. Restrictions may apply in other states. Check with your state authority for details. Federal and California emissions. Direct fit converter.

• PRICE: 794.99
• California Air Resources Board (CARB) Certified: No
• Universal Or Specific Fit: Specific Fit
• Grade Type: Standard Replacement
• Body Material: Stainless Steel
• Substrate Material: Ceramic

Application: All other states (Federal), Universal - Requires cut and weld

Notes: Rear, Catalytic Converter. EPA enhanced OBDII by design unit. Not for sale or use on vehicles licensed in the states of CA, CO, ME and NY. Restrictions may apply in other states. Check with your state authority for details. Federal and California emissions. Universal converter. Universal Fit.

• PRICE: 302.99
• California Air Resources Board (CARB) Certified: No
• Universal Or Specific Fit: Universal
• Body Width: 5.0in
• Grade Type: Standard Replacement
• Body Height: 4.25in
• Body Length: 10.0in
• Body Material: Stainless Steel
• Substrate Material: Ceramic

Application: All other states (Federal), OE Direct Fit - Factory mounting style

Notes: Front, Catalytic Converter with Integrated Exhaust Manifold. Carb compliant: no. With Partial Zero Emissions Vehicle (PZEV) California emissions. Not legal for sale in California.

• PRICE: 476.99
• Outlet Quantity: 1
• California Air Resources Board (CARB) Certified: No
• Outlet Type: Flanged
• Inlet Gasket Included: Yes
• Inlet Port Shape: Oval
• Color: Natural
• Inlet Mounting Hole Quantity: 4
• Air Tube Count: 0
• Converter Body Material: Stainless Steel
• Converter Body Length: 4in
• Grade Type: Standard Replacement
• Inlet Quantity: 1
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hole Quantity: 2
• Sensor Port Count: 2
• Outlet Mounting Hardware Included: Yes
• Overall Length: 16in