AGS NiCopp 3/16in x 60in Nickel-Copper Brake Line
Shop All American Grease Stick (AGS)| Warranty | |
|---|---|
| Part # | CNE-360 |
| SKU # | 97878 |
| Weight | 0.29lbs |
| Fitting Type | Male |
| Inside Diameter | 3/16in |
| End 2 Flare Type | Bubble |
| End 1 Flare Type | Bubble |
| Pre-Formed | No |
| Line Material | Nickel - Copper |
| Bendable | Yes |
| Line Length | 60in |
| Fitting Material | Yes |
| Fitting Finish | Black Anodized |
- By AGS — the industry leader in brake, fuel, and transmission lines | | Manufactured from a nickel-copper alloy containing approximately 9.2% nickel and 88.6% copper | | Bends 58% easier than steel tubing for faster, cleaner installations | | Considered a premium choice for vehicles exposed to road salt, humidity, or off-road conditions | | Will not rust or corrode, even in the harshest underbody environments | | Ideal for brake, fuel, and transmission line replacement | | Matches the strength and structural integrity of steel while offering superior corrosion resistance | | Meets ASTM B111 specifications for material quality | | Compatible with hydraulic and fluid transfer systems across automotive platforms | | DOT-approved for use in hydraulic brake systems | | 3/16" diameter | | Finished lines comes with black oxide coated tube nuts with thread: M10 x 1.0 | | Black oxide has 2x corrosion resistance to zinc-plated or plain steel fittings
- Sort by
- Filter by
COPPER LINE, ALUMINUM FITTINGS.
Green3 months agoVerified PurchaseI just needed new steel fittings to repair a brake line. Autozone had these premade copper lines, I bought 2 for $40 just in case I needed extra fittings. It turns out that the fittings are Aluminum. Needless to say, Aluminum fitting on a stainless steel line is no bueno, other than emergency situation.
Purchased for: 1987 BroncoIIHelpful?
It’s important to have quality products
Ricardo11 months agoVerified PurchaseSweepstakes EntryQuality material
Helpful?
Easy,easy,easy.
J. Miller1 year agoVerified PurchaseRecommendedSweepstakes EntryEasy to bend, easy to flare and easy to run.
Purchased for: 2006 Land Rover HSE, 2008 Mercedes Benz E63 AMG, 2008 BMW 335i, 2007 Chevy Silverado 2500HD Duramax, 1993 Ford Mustang Cobra, 2005 Ford F150 King Ranch, 2007 Suzuki GSXR 1300 Hayabusa.Helpful?
great choice
dan3 years agoVerified PurchaseRecommendedSweepstakes Entrybend by hand, corrosion proof
Purchased for: 2001 buick park avenue ultraHelpful?
description and exact fit most important. Good qua
john5 years agoVerified PurchaseRecommendedSweepstakes Entrydescription and exact fit most important. Good quality aftermarket parts1
Purchased for: 2002 Chevy Monte CarloHelpful?
My car stpps again
robert5 years agoVerified PurchaseRecommendedSweepstakes EntryEasy to bend brake line
Purchased for: 2004 honda civicHelpful?
Easy to use
Bob5 years agoVerified PurchaseRecommendedSweepstakes EntryVery easy to bend and shape. I have used Ni-Cu for a couple years and it holds up well to Pennsylvania winters.
Purchased for: 2001 Chevy SilveradoHelpful?
Auto zone
Bob5 years agoVerified PurchaseRecommendedThis product was why I needed and thank you to the woman that helped me find it!
Purchased for: 2001 Dodge CaravanHelpful?
Advice and How-To's
- Basic Parts of a Car and Their Functions
- The Best Gift Ideas for Car Mechanics
- How to Install a Splash Shield on a Car
- Best Car Dash Cams 2025
- How Many Filters Does a Car Have?
- How Much Does a Starter Replacement Cost?
- DOT 3 vs. DOT 4 Brake Fluid: What's the Difference?
- Dead Car Battery? Learn the Signs of a Bad Battery
- Learn 3 Common AC Problems
- How Much Does It Cost To Replace Brakes?