Reviews for Duralast Stoplight Switch F4863

Works great and seems to be really good quality product

Very easily installed videos on computer helped.

My brake lights weren’t working. After trying the fuses and center brake lights it was this. Cheap and easy fix and fixed my brake lights. Works great!

Was exactly what I needed for my 2006 Lincoln Town car. My brake lights were not coming on and this switch was the issue.

Great replacement. Brake lights stopped working unless they were pressed hard. Purchased this and installed in less than 10 minutes and lights are working like they should.

Great replacement part

Perfect fit, easy installation, we will see how long it last.

This product fit my 2007 mercury grand marquis

Thought maybe pricey was worried being the correct one but it was. Installation slightly difficult with location of the switch the ability to see it. Over all it went well so far works fine

Works as it should quick parking lot install to get my brake lights back up and working

Ordered the part at 3.pm picked it up at 10 am the next morning

It worked

I didn’t have to it use it

It works very acceptably.

Direct replacement for fixing brake light issue’s installed in less then 10 mins

Stopped by local AutoZone, picked up the new switch, installed it in 10 minutes. back on the road now with brake lights. switch is working perfectly.

Cruz would not release unless excessive brake pressure. Colum shifter would not unlock at times. Stuck in park.

The part was in-stock. Good quality andprice.Thanks

Turns out the brake light pedal switch was the source for the message on dash. Easy fix with the right part, no wait, in stock.

Replaced my brake light switch on my 2009 Ford Crown Vic. It installed easily and works well.

Had to change this part in the parking lot of autozone but it works great!

It replaced bad part now brake lights work

Part works well, not too hard to install.

Fit perfectly

Matt sold me the part i needed he went above and beyond to help me . He made an amazing effort to help me and did an outstanding job. I wish there were more like him.

Product was just what I needed and at the least expensive cost and FREE shipping. Can't beat that.

Seem to be good quality. Part in, part out.

Direct fit no messing around with adapter or linkage additions. Got me back on the road saved the day

Installation was very simple

Easy install..Fixed a number of issues including the cruise control not turning off.

no more code for short

BRAKE LIGHT SWITCH THAT MOUNTS TO THE BRAKE PEDAL IN 2004 RANGER 4X4. HARD TO GET TO, BUT EASY TO REPLACE. JUST HAVE TO PULL THE BOTTOM PANNELOF THE DASH BELOW THE STEERING COLUMN.

The stop light switch went on perfectly and cured the problem on no brake lights. I am much obliged to the helpful staff at the store who was both knowledgeable about the problem and helpful.

Liked everything I bought they were so helpful

I like the way it worked for, I was able to slip it right in to place plug in and my brake lights worked as expected

I liked it alot no bad things about it

Although through these times the staff still makes time to actually help you outside

My vehicle had no brake lights and burned brake light fuse. Replacing fuse did not repair the problem. After complete diagnosis. I replaced the brake light switch. Now I can drive without worrying about someone running into the back of me. MOST OF ALL NO HASSLE FROM THE PO PO.

Worked great. Popped right in.

Bought this for a Mercury Marquis and it worked perfectly

working wonderful lights not sticking on. Just loving it.

To what the Democrat for the part works like it's supposed to I had to remove the bushing from the brake pedal to make it work properly now it works just fine tolerance was a little bit tight

This part solved the problem with our F53 RV’s brake lights. I had thought the problem was with the bulbs but after I got all bulbs working it was worse. The only problem with this part was that replacement instructions were hard to find. Incidentally, the old part seemed to work properly when I tested it, but it didn’t really work properly when in actual use.

The price could have been a little less.

It's actually easy to get this thing put on 90 degrees off, and it won't work right. Make sure when you put it on, the pushrod end is pointing right at the button. \r\nIt's a pain to change since you have to reach up under the dash and do everything by feel. \r\nIt's fairly easy to change all in all once you get a feel for everything.

If you try to install it backwards it will break every time make sure the closed end goes on last open end first if installed right works perfect

My brake lights quit working and found the problem to be the brake light switch. \nI installed this one from AutoZone and it did fix my issue with the brake lights but created another. When using the cruise control if the road is a little bumpy it will shake the brake pedal enough it will cancel the cruise control.\nMy truck is a one ton 4X4 solid front axle and it rides like a tank so this is an inconvenience.\nMy old switch did not do this when the brake light portion of the switch quit the CC still worked fine. I should have exchanged this when I first noticed it and qualified for free exchange. On the fence now if I should replace with OEM next...

HOW LONG LASTING

easy to replace

I hoped it would work because it's a decent price and lifetime warranty. It fixed the brake lights, but like so many other reviews I've read for non-OEM replacements for this part, my cruise control and auto locks stopped working. Returned and got the Motorcraft part, which worked perfectly.