Duralast Ball Joint Separator 84-011

Shop All Duralast
Part #
84-011
slide 1 of 7
Duralast Ball Joint Separator 84-011
The price of this item is: 31 dollars and 49 cents
quantity
Specifications:
View All
Warranty:
Limited-Lifetime Warranty
Part Number:
84-011
SKU Number:
1530588
Warranty
Part #84-011
SKU #1530588
The Duralast Ball Joint Separator delivers controlled, damage-free separation of press-fit joints. Its screw-press mechanism applies smooth, even force that pops the taper loose without shocking surrounding components. With a 1 13/16-inch maximum opening and a 7/8-inch fork width, it covers everything from compact sedans to ½-ton pickups. The slim C-frame slides easily into tight suspension pockets, while forged alloy steel and a black-oxide coating ensure years of reliable service.
  • Screw-press design applies steady separating force—no hammer blows required
  • Dual-step height adjuster handles stud lengths up to 1 13/16″ (46 mm)
  • 7/8″ (22 mm) fork opening fits most passenger-car and light-truck ball joints
  • Slim C-frame profile slips between spindle and control arm where space is limited
  • Forged alloy-steel body with corrosion-resistant black-oxide finish
26 Ratings
60% Recommended
Looking for something specific?
  • Sort By
  • Filter by
Show reviews that mention
16 Reviews
  • MIKE
    12 days ago
    Verified Purchase
    It dod remove the ball joint, but it ended up bending them. Only use of you plan on replacing the ball joint

    Helpful?

  • CARLOS
    16 days ago
    Verified Purchase
    Easy to use and the adjustability is helpful. Just make sure when making adjustments to set the pin in all the way.

    Helpful?

  • MARK
    19 days ago
    Verified Purchase
    Recommended
    Ball Joint Separator did the job perfectly and saved me time, hassle and also prevented me from damaging the outer tie rod end bolt treading while doing the replacement. Thank you AutoZone. 😎👍

    Helpful?

  • Anonymous
    24 days ago
    Verified Purchase
    Nice tool , never use big hammer again
    Purchased for: 2003 Chevrolet Silverado 2500

    Helpful?

  • bad quality and construction of the tool

    GABRIEL
    29 days ago
    Verified Purchase
    i needed this tool to change front control arms in my cayenne and when i did the first ball joint the bar that holds in place the two parts of the tool slide out and when i picked it up i didnt had the locking ball anymore plus the thread of the main screw started to break so i return it
    Purchased for: 2014 Porsche Cayenne

    Helpful?

  • JORGE
    1 month ago
    Verified Purchase
    Like it

    Helpful?

  • Ball Joint Separator

    Joint Separator
    1 month ago
    Verified Purchase
    It worked great on a 1969 chevrolet. I was able to attach the joint separator to the upper ball joint easily. Few taps of a hammer and it separated from the knuckle.

    Helpful?

  • JOHN
    2 months ago
    Verified Purchase
    I have to return it it is defective

    Helpful?

  • DAVE
    2 months ago
    Verified Purchase
    Recommended
    The Durablast ball joint separator made removing the ball joints on my car super easy! It’s made of durable materials, and the screw mechanism provides the leverage needed to separate the joint from the control arm even in tight spaces. Highly recommend using this product, even if you don’t ever plan to use it again!
    Purchased for: 2014 Honda Civic

    Helpful?

  • Porsche Cayenne Ball Joint Separator

    JOHN
    2 months ago
    Verified Purchase
    Recommended
    The device was effective and efficient at separating the ball joint; just don't remove the nut all the way before using the tool. The device is much more effective and technically superior to the shade tree methods - pickle fork and hammer or just beating on it with a hammer until it gives up and separates.
    Purchased for: 2014 Porsche Cayenne

    Helpful?

  • KEITH
    3 months ago
    Verified Purchase
    Works well.

    Helpful?

  • It’s a delicate piece

    N/A
    3 months ago
    Verified Purchase
    It broke the first time bought. It was scary.
    Purchased for: Mercedes 2010

    Helpful?

  • Works as it should - Just be patient

    Anonymous
    4 months ago
    Verified Purchase
    Recommended
    Does what it's designed to do. Didn't break or anything. Priced nicely. If you've not used one before, whatch a youtube... you gotta be patient.
    Purchased for: 2014 Porsche Cayenne Diesel

    Helpful?

  • Junk

    GG
    4 months ago
    Verified Purchase
    Infiniti FX35 Ball joint. Junk. The threads on the bolt striped. Made from pot metal. Just rent OEM one and save yourself the headache.
    Purchased for: 2004 FX35

    Helpful?

  • Great tool

    Sjuneau10
    4 months ago
    Verified Purchase
    Recommended
    Great tool saved a ton of time on my 01 Chevy blazer, no need to use a mini sledge with this awesome tool.
    Purchased for: 01 Chevy S10 blazer

    Helpful?

  • Separator NOT for pressing

    EJ
    4 months ago
    Verified Purchase
    Recommended
    This tool was easy to use and popped my lower ball joint out with ease on the first try.
    Purchased for: 1997 Honda Civic

    Helpful?