First, Add Your Vehicle
Get an exact fit for your vehicle.
Tap image to zoom
Total price is: 12 dollars and 99 cents.
| Part # | 8508 |
|---|---|
| SKU # | 1313593 |
| Weight | 0.09lbs |
| Ground Electrode Tip Material | Nickel |
| Resistor Type | Yes |
| Center Electrode Tip Material | Iridium |
| Pre-Gap Size | .7mm |
| Insulator Material | Ceramic |
| Thread Diameter | 12mm |
| Center Electrode Core Material | Copper |
| Grade Type | Standard Replacement |
| Seat Type | Tapered |
| Reach | 25mm |
| Manufacturer Heat Range | 5 |
| Indexed | No |
| Hex Size | 14 |
| Metal Type | Iridium - Double |
| Resistance | 6000Ohms |
| Ground Electrode Tip Design | Standard |
| Ground Electrode Quantity | 1 |
| Ground Configuration | Standard |
| Center Electrode Design | Fine Wire |
| Ground Electrode Core Material | Copper |
| Hex Type | Hex |
| Electrical Terminal Type | Non-Removable Nut |
| Washer(s) Included | No |
Bosch EVO spark plugs are engineered to ensure reliable ignition throughout its long service life – even under extreme conditions in modern engines. Thanks to its improved insulator design and high dielectric strength (greater than 45 kV), the new EVO spark plugs can withstand irregular combustion – known as mega knocking – that can occur in modern, technologically advanced engines. Bosch EVO spark plugs are developed and produced with the same high quality as original equipment spark plugs. Today’s turbocharged gasoline direct injection engines place high demands on spark plugs - the new Bosch EVO meets these needs.
Thermomechanical strength: Improved insulator design features provide greater resistance to irregular burns and mega-knocking- Mechanical strength: Improved design features on the insulator and housing increase the head bending strength, reducing risk of damage during installation and optimizing gas seal tightness in the cylinder head
- Electrical strength: Improved design features on the insulator increase the dielectric strength (>45kV)
- Long service life: The iridium alloy in the firing pin of the center electrode and platinum-iridium alloy on the ground electrode reduces the wear on the electrodes and increases the service life of the spark plug
- Corrosion defense: Improved corrosion protection through the use of a process developed by Bosch for nickel coating of the spark plug housing
- Important: Always torque to the proper specification using a torque wrench
Spark Plugs Metal Types
Currently Viewing  Bosch Double Iridium Spark Plug 8508 | ||||
|---|---|---|---|---|
Customer Rating | (4)Total Reviews | (5)Total Reviews | (1)Total Reviews | (1)Total Reviews |
Price | Total price is: 12 dollars and 99 cents. | Total price is: 2 dollars and 99 cents. | Total price is: 10 dollars and 99 cents. | Total price is: 23 dollars and 99 cents. |
Metal Type | Iridium - Double | Copper | Iridium - Double | Iridium - Double |
Customer Reviews
- Sort by
- Filter by
0 Reviews
Related Accessories
Advice and How-To's
- Ruthenium vs Iridium Spark Plugs: Which Is Right for Your Engine?
- How to Read Spark Plugs
- Spark Plugs vs Glow Plugs: What’s the Difference?
- NGK vs Bosch Spark Plugs Comparison: Which Should You Choose?
- How to Replace a Spark Plug Insulator Boot
- How to Remove Seized Spark Plugs
- Tune-Up Cost Guide - How Much is a Tune-Up?
- How to Tell If Your Spark Plugs Need to Be Replaced
- Common Ignition Problems
- How Do Spark Plugs Work? (Spark Plugs Explained)